From 2cb9685860d634c66988c4d45b7a696e6e2b42a8 Mon Sep 17 00:00:00 2001 From: Vladimir Serbinenko Date: Sat, 18 Jan 2014 23:29:55 +0100 Subject: jetway/j7f24: Rename to jetway/j7f2. Original actually meant j7f[24] which without square brackets became confusing. There is no such board as j7f24. This is a prerequisite to adding j7f4* as cloned boards Change-Id: Ia7708b13ac4141ef788183c7817fce1366919936 Signed-off-by: Vladimir Serbinenko Reviewed-on: http://review.coreboot.org/4728 Reviewed-by: Alexandru Gagniuc Tested-by: build bot (Jenkins) --- src/mainboard/jetway/j7f2/devicetree.cb | 62 +++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 src/mainboard/jetway/j7f2/devicetree.cb (limited to 'src/mainboard/jetway/j7f2/devicetree.cb') diff --git a/src/mainboard/jetway/j7f2/devicetree.cb b/src/mainboard/jetway/j7f2/devicetree.cb new file mode 100644 index 0000000000..3b99b9c3b2 --- /dev/null +++ b/src/mainboard/jetway/j7f2/devicetree.cb @@ -0,0 +1,62 @@ +chip northbridge/via/cn700 # Northbridge + device domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci a.0 on end # Firewire + device pci f.0 on end # SATA + device pci f.1 on end # IDE + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 11.0 on # Southbridge LPC + chip superio/fintek/f71805f # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c7 # VIA C7 + device lapic 0 on end # APIC + end + end +end -- cgit v1.2.3