From f8ee1806ac524bc782c93eccc59ee3c929abddb9 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 18 Jan 2008 15:08:58 +0000 Subject: Rename almost all occurences of LinuxBIOS to coreboot. Due to the automatic nature of this update, I am self-acking. It worked in abuild. Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/iwill/dk8_htx/Config.lb | 14 +++++++------- src/mainboard/iwill/dk8_htx/Options.lb | 14 +++++++------- src/mainboard/iwill/dk8s2/Config.lb | 14 +++++++------- src/mainboard/iwill/dk8s2/Options.lb | 14 +++++++------- src/mainboard/iwill/dk8x/Config.lb | 14 +++++++------- src/mainboard/iwill/dk8x/Options.lb | 14 +++++++------- 6 files changed, 42 insertions(+), 42 deletions(-) (limited to 'src/mainboard/iwill') diff --git a/src/mainboard/iwill/dk8_htx/Config.lb b/src/mainboard/iwill/dk8_htx/Config.lb index 31f3236d51..99ad24b981 100644 --- a/src/mainboard/iwill/dk8_htx/Config.lb +++ b/src/mainboard/iwill/dk8_htx/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -162,7 +162,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT @@ -189,7 +189,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -223,7 +223,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb index 713c8ad54d..6d8eab4d0c 100644 --- a/src/mainboard/iwill/dk8_htx/Options.lb +++ b/src/mainboard/iwill/dk8_htx/Options.lb @@ -40,7 +40,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -122,7 +122,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -149,7 +149,7 @@ default ACPI_SSDTX_NUM=3 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -236,10 +236,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -258,7 +258,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -308,7 +308,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/iwill/dk8s2/Config.lb b/src/mainboard/iwill/dk8s2/Config.lb index 59312df508..4cb18e5757 100644 --- a/src/mainboard/iwill/dk8s2/Config.lb +++ b/src/mainboard/iwill/dk8s2/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -95,7 +95,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -115,7 +115,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -145,7 +145,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/iwill/dk8s2/Options.lb b/src/mainboard/iwill/dk8s2/Options.lb index 10e89d88b4..81aa84ef7e 100644 --- a/src/mainboard/iwill/dk8s2/Options.lb +++ b/src/mainboard/iwill/dk8s2/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -72,7 +72,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -94,7 +94,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -131,10 +131,10 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -153,7 +153,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -202,7 +202,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/iwill/dk8x/Config.lb b/src/mainboard/iwill/dk8x/Config.lb index 30f7c3ce50..6eece3e320 100644 --- a/src/mainboard/iwill/dk8x/Config.lb +++ b/src/mainboard/iwill/dk8x/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -92,7 +92,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -112,7 +112,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -142,7 +142,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/iwill/dk8x/Options.lb b/src/mainboard/iwill/dk8x/Options.lb index 4c982f2242..1811aa44c5 100644 --- a/src/mainboard/iwill/dk8x/Options.lb +++ b/src/mainboard/iwill/dk8x/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -72,7 +72,7 @@ default FALLBACK_SIZE=131072 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -94,7 +94,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -130,10 +130,10 @@ default CONFIG_USE_INIT=0 #default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -152,7 +152,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -201,7 +201,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately -- cgit v1.2.3