From 38f147ed3d9fdd6bfb23d7226f6fdd3fc5db53d0 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Mon, 8 Feb 2010 12:20:50 +0000 Subject: janitor task: unify and cleanup naming. cache_as_ram_auto.c and auto.c are both called "romstage.c" now. Signed-off-by: Stefan Reinauer Acked-by: Patrick Georgi git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/iwill/dk8_htx/Makefile.inc | 6 +- src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c | 323 ------------------------ src/mainboard/iwill/dk8_htx/romstage.c | 323 ++++++++++++++++++++++++ src/mainboard/iwill/dk8s2/cache_as_ram_auto.c | 323 ------------------------ src/mainboard/iwill/dk8s2/romstage.c | 323 ++++++++++++++++++++++++ src/mainboard/iwill/dk8x/cache_as_ram_auto.c | 323 ------------------------ src/mainboard/iwill/dk8x/romstage.c | 323 ++++++++++++++++++++++++ 7 files changed, 972 insertions(+), 972 deletions(-) delete mode 100644 src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c create mode 100644 src/mainboard/iwill/dk8_htx/romstage.c delete mode 100644 src/mainboard/iwill/dk8s2/cache_as_ram_auto.c create mode 100644 src/mainboard/iwill/dk8s2/romstage.c delete mode 100644 src/mainboard/iwill/dk8x/cache_as_ram_auto.c create mode 100644 src/mainboard/iwill/dk8x/romstage.c (limited to 'src/mainboard/iwill') diff --git a/src/mainboard/iwill/dk8_htx/Makefile.inc b/src/mainboard/iwill/dk8_htx/Makefile.inc index 1b991e89a7..95af1006cf 100644 --- a/src/mainboard/iwill/dk8_htx/Makefile.inc +++ b/src/mainboard/iwill/dk8_htx/Makefile.inc @@ -44,7 +44,7 @@ crt0s += $(src)/cpu/x86/32bit/entry32.inc crt0s += $(src)/cpu/x86/16bit/reset16.inc crt0s += $(src)/arch/i386/lib/id.inc crt0s += $(src)/cpu/amd/car/cache_as_ram.inc -crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc +crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc ldscripts := $(src)/arch/i386/init/ldscript_fallback_cbfs.lb ldscripts += $(src)/cpu/x86/16bit/entry16.lds @@ -81,8 +81,8 @@ $(obj)/mainboard/$(MAINBOARDDIR)/ssdt5.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pc perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' $(obj)/pci5.hex mv $(obj)/pci5.hex $@ -$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h - $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@ +$(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/romstage.c -o $@ perl -e 's/\.rodata/.rom.data/g' -pi $@ perl -e 's/\.text/.section .rom.text/g' -pi $@ diff --git a/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c b/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c deleted file mode 100644 index cdfdfc09c5..0000000000 --- a/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c +++ /dev/null @@ -1,323 +0,0 @@ -#define ASSEMBLY 1 -#define __PRE_RAM__ - -#define RAMINIT_SYSINFO 1 -#define CACHE_AS_RAM_ADDRESS_DEBUG 0 - -#define SET_NB_CFG_54 1 - -//used by raminit -#define QRANK_DIMM_SUPPORT 1 - -//used by incoherent_ht -//#define K8_ALLOCATE_IO_RANGE 1 - -//used by init_cpus and fidvid -#define K8_SET_FIDVID 0 -//if we want to wait for core1 done before DQS training, set it to 0 -#define K8_SET_FIDVID_CORE0_ONLY 1 - -#if CONFIG_K8_REV_F_SUPPORT == 1 -#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" - -#if CONFIG_USE_FAILOVER_IMAGE==0 -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#endif - - - -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_USE_FAILOVER_IMAGE==0 -#include "cpu/x86/bist.h" - -#include "lib/delay.c" - -#include "northbridge/amd/amdk8/debug.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" - -/* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has controll of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - -#include "northbridge/amd/amdk8/incoherent_ht.c" - -#include "northbridge/amd/amdk8/raminit.c" - -#include "lib/generic_sdram.c" -#include "lib/ramtest.c" - - /* tyan does not want the default */ -#include "resourcemap.c" - -#include "cpu/amd/dualcore/dualcore.c" - -#define DIMM0 0x50 -#define DIMM1 0x51 -#define DIMM2 0x52 -#define DIMM3 0x53 -#define DIMM4 0x54 -#define DIMM5 0x55 -#define DIMM6 0x56 -#define DIMM7 0x57 - - -#include "cpu/amd/car/copy_and_run.c" -#include "cpu/amd/car/post_cache_as_ram.c" - -#include "cpu/amd/model_fxx/init_cpus.c" - -#include "cpu/amd/model_fxx/fidvid.c" -#endif - -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - -#if CONFIG_USE_FAILOVER_IMAGE==0 - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - //first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, -#endif - - }; - - struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); - - int needs_reset; int i; - unsigned bsp_apicid = 0; - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); - - setup_mb_resource_map(); - - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); - -#if CONFIG_MEM_TRAIN_SEQ == 1 - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram -#endif - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - -#if K8_SET_FIDVID == 1 - - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - - } - - enable_fid_change(); - - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - init_fidvid_bsp(bsp_apicid); - - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - -#if 0 - dump_smbus_registers(); -#endif - - memreset_setup(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - init_timer(); // Need to use TMICT to synconize FID/VID - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - -#if 0 - dump_pci_devices(); -#endif - - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now - -} -#endif diff --git a/src/mainboard/iwill/dk8_htx/romstage.c b/src/mainboard/iwill/dk8_htx/romstage.c new file mode 100644 index 0000000000..cdfdfc09c5 --- /dev/null +++ b/src/mainboard/iwill/dk8_htx/romstage.c @@ -0,0 +1,323 @@ +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +//used by incoherent_ht +//#define K8_ALLOCATE_IO_RANGE 1 + +//used by init_cpus and fidvid +#define K8_SET_FIDVID 0 +//if we want to wait for core1 done before DQS training, set it to 0 +#define K8_SET_FIDVID_CORE0_ONLY 1 + +#if CONFIG_K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#endif + + + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "cpu/x86/bist.h" + +#include "lib/delay.c" + +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" + +/* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + /* Set the memreset low */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); + /* Ensure the BIOS has control of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); + } else { + /* Ensure the CPU has controll of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); + } +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset_high */ + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/coherent_ht.c" + +#include "northbridge/amd/amdk8/incoherent_ht.c" + +#include "northbridge/amd/amdk8/raminit.c" + +#include "lib/generic_sdram.c" +#include "lib/ramtest.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + +#include "cpu/amd/model_fxx/fidvid.c" +#endif + +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if CONFIG_HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if CONFIG_USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + //first node + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, +#endif + + }; + + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + int needs_reset; int i; + unsigned bsp_apicid = 0; + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + + setup_mb_resource_map(); + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + +#if CONFIG_MEM_TRAIN_SEQ == 1 + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#endif + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + + +#if K8_SET_FIDVID == 1 + + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } + + enable_fid_change(); + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + init_fidvid_bsp(bsp_apicid); + + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } +#endif + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); + } + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ + init_timer(); // Need to use TMICT to synconize FID/VID + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + +#if 0 + dump_pci_devices(); +#endif + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now + +} +#endif diff --git a/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c b/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c deleted file mode 100644 index 271ad6cc54..0000000000 --- a/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c +++ /dev/null @@ -1,323 +0,0 @@ -#define ASSEMBLY 1 -#define __PRE_RAM__ - -#define RAMINIT_SYSINFO 1 -#define CACHE_AS_RAM_ADDRESS_DEBUG 0 - -#define SET_NB_CFG_54 1 - -//used by raminit -#define QRANK_DIMM_SUPPORT 1 - -//used by incoherent_ht -//#define K8_ALLOCATE_IO_RANGE 1 - -//used by init_cpus and fidvid -#define K8_SET_FIDVID 0 -//if we want to wait for core1 done before DQS training, set it to 0 -#define K8_SET_FIDVID_CORE0_ONLY 1 - -#if CONFIG_K8_REV_F_SUPPORT == 1 -#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" - -#if CONFIG_USE_FAILOVER_IMAGE==0 -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#endif - - - -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_USE_FAILOVER_IMAGE==0 -#include "cpu/x86/bist.h" - -#include "lib/delay.c" - -#include "northbridge/amd/amdk8/debug.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" - -/* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has controll of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - -#include "northbridge/amd/amdk8/incoherent_ht.c" - -#include "northbridge/amd/amdk8/raminit.c" - -#include "lib/generic_sdram.c" -#include "lib/ramtest.c" - - /* tyan does not want the default */ -#include "northbridge/amd/amdk8/resourcemap.c" - -#include "cpu/amd/dualcore/dualcore.c" - -#define DIMM0 0x50 -#define DIMM1 0x51 -#define DIMM2 0x52 -#define DIMM3 0x53 -#define DIMM4 0x54 -#define DIMM5 0x55 -#define DIMM6 0x56 -#define DIMM7 0x57 - - -#include "cpu/amd/car/copy_and_run.c" -#include "cpu/amd/car/post_cache_as_ram.c" - -#include "cpu/amd/model_fxx/init_cpus.c" - -#include "cpu/amd/model_fxx/fidvid.c" -#endif - -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - -#if CONFIG_USE_FAILOVER_IMAGE==0 - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - //first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, -#endif - - }; - - struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); - - int needs_reset; int i; - unsigned bsp_apicid = 0; - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); - - setup_default_resource_map(); - - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); - -#if CONFIG_MEM_TRAIN_SEQ == 1 - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram -#endif - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - -#if K8_SET_FIDVID == 1 - - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - - } - - enable_fid_change(); - - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - init_fidvid_bsp(bsp_apicid); - - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - -#if 0 - dump_smbus_registers(); -#endif - - memreset_setup(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - init_timer(); // Need to use TMICT to synconize FID/VID - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - -#if 0 - dump_pci_devices(); -#endif - - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now - -} -#endif diff --git a/src/mainboard/iwill/dk8s2/romstage.c b/src/mainboard/iwill/dk8s2/romstage.c new file mode 100644 index 0000000000..271ad6cc54 --- /dev/null +++ b/src/mainboard/iwill/dk8s2/romstage.c @@ -0,0 +1,323 @@ +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +//used by incoherent_ht +//#define K8_ALLOCATE_IO_RANGE 1 + +//used by init_cpus and fidvid +#define K8_SET_FIDVID 0 +//if we want to wait for core1 done before DQS training, set it to 0 +#define K8_SET_FIDVID_CORE0_ONLY 1 + +#if CONFIG_K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#endif + + + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "cpu/x86/bist.h" + +#include "lib/delay.c" + +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" + +/* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + /* Set the memreset low */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); + /* Ensure the BIOS has control of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); + } else { + /* Ensure the CPU has controll of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); + } +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset_high */ + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/coherent_ht.c" + +#include "northbridge/amd/amdk8/incoherent_ht.c" + +#include "northbridge/amd/amdk8/raminit.c" + +#include "lib/generic_sdram.c" +#include "lib/ramtest.c" + + /* tyan does not want the default */ +#include "northbridge/amd/amdk8/resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + +#include "cpu/amd/model_fxx/fidvid.c" +#endif + +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if CONFIG_HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if CONFIG_USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + //first node + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, +#endif + + }; + + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + int needs_reset; int i; + unsigned bsp_apicid = 0; + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + + setup_default_resource_map(); + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + +#if CONFIG_MEM_TRAIN_SEQ == 1 + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#endif + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + + +#if K8_SET_FIDVID == 1 + + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } + + enable_fid_change(); + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + init_fidvid_bsp(bsp_apicid); + + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } +#endif + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); + } + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ + init_timer(); // Need to use TMICT to synconize FID/VID + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + +#if 0 + dump_pci_devices(); +#endif + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now + +} +#endif diff --git a/src/mainboard/iwill/dk8x/cache_as_ram_auto.c b/src/mainboard/iwill/dk8x/cache_as_ram_auto.c deleted file mode 100644 index 271ad6cc54..0000000000 --- a/src/mainboard/iwill/dk8x/cache_as_ram_auto.c +++ /dev/null @@ -1,323 +0,0 @@ -#define ASSEMBLY 1 -#define __PRE_RAM__ - -#define RAMINIT_SYSINFO 1 -#define CACHE_AS_RAM_ADDRESS_DEBUG 0 - -#define SET_NB_CFG_54 1 - -//used by raminit -#define QRANK_DIMM_SUPPORT 1 - -//used by incoherent_ht -//#define K8_ALLOCATE_IO_RANGE 1 - -//used by init_cpus and fidvid -#define K8_SET_FIDVID 0 -//if we want to wait for core1 done before DQS training, set it to 0 -#define K8_SET_FIDVID_CORE0_ONLY 1 - -#if CONFIG_K8_REV_F_SUPPORT == 1 -#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" - -#if CONFIG_USE_FAILOVER_IMAGE==0 -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#endif - - - -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_USE_FAILOVER_IMAGE==0 -#include "cpu/x86/bist.h" - -#include "lib/delay.c" - -#include "northbridge/amd/amdk8/debug.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" - -/* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has controll of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - -#include "northbridge/amd/amdk8/incoherent_ht.c" - -#include "northbridge/amd/amdk8/raminit.c" - -#include "lib/generic_sdram.c" -#include "lib/ramtest.c" - - /* tyan does not want the default */ -#include "northbridge/amd/amdk8/resourcemap.c" - -#include "cpu/amd/dualcore/dualcore.c" - -#define DIMM0 0x50 -#define DIMM1 0x51 -#define DIMM2 0x52 -#define DIMM3 0x53 -#define DIMM4 0x54 -#define DIMM5 0x55 -#define DIMM6 0x56 -#define DIMM7 0x57 - - -#include "cpu/amd/car/copy_and_run.c" -#include "cpu/amd/car/post_cache_as_ram.c" - -#include "cpu/amd/model_fxx/init_cpus.c" - -#include "cpu/amd/model_fxx/fidvid.c" -#endif - -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - -#if CONFIG_USE_FAILOVER_IMAGE==0 - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - //first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, -#endif - - }; - - struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); - - int needs_reset; int i; - unsigned bsp_apicid = 0; - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); - - setup_default_resource_map(); - - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); - -#if CONFIG_MEM_TRAIN_SEQ == 1 - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram -#endif - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - -#if K8_SET_FIDVID == 1 - - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - - } - - enable_fid_change(); - - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - init_fidvid_bsp(bsp_apicid); - - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - -#if 0 - dump_smbus_registers(); -#endif - - memreset_setup(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - init_timer(); // Need to use TMICT to synconize FID/VID - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - -#if 0 - dump_pci_devices(); -#endif - - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now - -} -#endif diff --git a/src/mainboard/iwill/dk8x/romstage.c b/src/mainboard/iwill/dk8x/romstage.c new file mode 100644 index 0000000000..271ad6cc54 --- /dev/null +++ b/src/mainboard/iwill/dk8x/romstage.c @@ -0,0 +1,323 @@ +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +//used by incoherent_ht +//#define K8_ALLOCATE_IO_RANGE 1 + +//used by init_cpus and fidvid +#define K8_SET_FIDVID 0 +//if we want to wait for core1 done before DQS training, set it to 0 +#define K8_SET_FIDVID_CORE0_ONLY 1 + +#if CONFIG_K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#endif + + + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "cpu/x86/bist.h" + +#include "lib/delay.c" + +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" + +/* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + /* Set the memreset low */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); + /* Ensure the BIOS has control of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); + } else { + /* Ensure the CPU has controll of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); + } +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset_high */ + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/coherent_ht.c" + +#include "northbridge/amd/amdk8/incoherent_ht.c" + +#include "northbridge/amd/amdk8/raminit.c" + +#include "lib/generic_sdram.c" +#include "lib/ramtest.c" + + /* tyan does not want the default */ +#include "northbridge/amd/amdk8/resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + +#include "cpu/amd/model_fxx/fidvid.c" +#endif + +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if CONFIG_HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if CONFIG_USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + //first node + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, +#endif + + }; + + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + int needs_reset; int i; + unsigned bsp_apicid = 0; + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + + setup_default_resource_map(); + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + +#if CONFIG_MEM_TRAIN_SEQ == 1 + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#endif + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + + +#if K8_SET_FIDVID == 1 + + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } + + enable_fid_change(); + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + init_fidvid_bsp(bsp_apicid); + + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } +#endif + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); + } + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ + init_timer(); // Need to use TMICT to synconize FID/VID + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + +#if 0 + dump_pci_devices(); +#endif + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now + +} +#endif -- cgit v1.2.3