From 7a9520483aad833cb11fadf3ee12decee8d1e521 Mon Sep 17 00:00:00 2001 From: Tobias Diedrich Date: Sun, 3 Dec 2017 10:09:28 +0100 Subject: intel/dcp847ske: Add Intel NUC DCP847SKE https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE Created using autoport and manual edits. mainboard_fill_pei_data copied and adjusted from samsung/lumpy. Tested: - RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V). - RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V). - SeaBIOS stable payload. - Linux 4.13.14 payload. - Booting into Linux 4.13.14 with Debian/unstable installed on the internal mSATA slot. - Non-native raminit (works). - Native raminit - KVR1333D3S9 doesn't work. - KVR16LS11 only works at 1.5V. - Native VGA init, HDMI port detection with libgfxinit. - Basic ACPI functions (power button event; power-off; reboot). - Suspend to RAM and resume works. - PCIe WLAN in half-minicard slot. - USB device in half-minicard slot. - PCIe device in full-minicard slot. - mSATA device in full-minicard slot. - Fan spins up/down in response to CPU load. Known issues: - Native raminit fails timC calibration with the RAM I have. - Technical Product Specification mentions overcurrent protection for back panel and front panel USB connectors, but I haven't been able to trigger it with either native fw or coreboot (tried up to 2.5A load). Untested: - USB debug port. Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90 Signed-off-by: Tobias Diedrich Reviewed-on: https://review.coreboot.org/22683 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held Reviewed-by: Arthur Heymans --- src/mainboard/intel/dcp847ske/Kconfig | 92 ++++++++++ src/mainboard/intel/dcp847ske/Kconfig.name | 2 + src/mainboard/intel/dcp847ske/Makefile.inc | 4 + src/mainboard/intel/dcp847ske/acpi/ec.asl | 1 + src/mainboard/intel/dcp847ske/acpi/platform.asl | 29 +++ src/mainboard/intel/dcp847ske/acpi/superio.asl | 1 + src/mainboard/intel/dcp847ske/acpi_tables.c | 36 ++++ src/mainboard/intel/dcp847ske/board_info.txt | 6 + src/mainboard/intel/dcp847ske/devicetree.cb | 108 +++++++++++ src/mainboard/intel/dcp847ske/dsdt.asl | 43 +++++ src/mainboard/intel/dcp847ske/early_southbridge.c | 197 ++++++++++++++++++++ src/mainboard/intel/dcp847ske/gma-mainboard.ads | 28 +++ src/mainboard/intel/dcp847ske/gpio.c | 209 ++++++++++++++++++++++ src/mainboard/intel/dcp847ske/hda_verb.c | 40 +++++ src/mainboard/intel/dcp847ske/mainboard.c | 38 ++++ src/mainboard/intel/dcp847ske/romstage.c | 69 +++++++ src/mainboard/intel/dcp847ske/smihandler.c | 29 +++ src/mainboard/intel/dcp847ske/superio.h | 54 ++++++ src/mainboard/intel/dcp847ske/thermal.h | 30 ++++ src/mainboard/intel/dcp847ske/usb.h | 35 ++++ 20 files changed, 1051 insertions(+) create mode 100644 src/mainboard/intel/dcp847ske/Kconfig create mode 100644 src/mainboard/intel/dcp847ske/Kconfig.name create mode 100644 src/mainboard/intel/dcp847ske/Makefile.inc create mode 100644 src/mainboard/intel/dcp847ske/acpi/ec.asl create mode 100644 src/mainboard/intel/dcp847ske/acpi/platform.asl create mode 100644 src/mainboard/intel/dcp847ske/acpi/superio.asl create mode 100644 src/mainboard/intel/dcp847ske/acpi_tables.c create mode 100644 src/mainboard/intel/dcp847ske/board_info.txt create mode 100644 src/mainboard/intel/dcp847ske/devicetree.cb create mode 100644 src/mainboard/intel/dcp847ske/dsdt.asl create mode 100644 src/mainboard/intel/dcp847ske/early_southbridge.c create mode 100644 src/mainboard/intel/dcp847ske/gma-mainboard.ads create mode 100644 src/mainboard/intel/dcp847ske/gpio.c create mode 100644 src/mainboard/intel/dcp847ske/hda_verb.c create mode 100644 src/mainboard/intel/dcp847ske/mainboard.c create mode 100644 src/mainboard/intel/dcp847ske/romstage.c create mode 100644 src/mainboard/intel/dcp847ske/smihandler.c create mode 100644 src/mainboard/intel/dcp847ske/superio.h create mode 100644 src/mainboard/intel/dcp847ske/thermal.h create mode 100644 src/mainboard/intel/dcp847ske/usb.h (limited to 'src/mainboard/intel') diff --git a/src/mainboard/intel/dcp847ske/Kconfig b/src/mainboard/intel/dcp847ske/Kconfig new file mode 100644 index 0000000000..1fd3d8cc80 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/Kconfig @@ -0,0 +1,92 @@ +if BOARD_INTEL_DCP847SKE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select BOARD_ROMSIZE_KB_8192 + select CPU_INTEL_SOCKET_RPGA989 + select SUPERIO_NUVOTON_NCT6776 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SOUTHBRIDGE_INTEL_C216 + select SERIRQ_CONTINUOUS_MODE + select INTEL_INT15 + select MAINBOARD_HAS_LIBGFXINIT + +menu "Debugging" + +config DISABLE_UART_ON_TESTPADS + bool "Disable UART on testpads" + default y + select NO_UART_ON_SUPERIO + help + Serial output requires soldering to the testpad next to + NCT5577D pin 18 (txd) and gnd. + +endmenu + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +config MAINBOARD_DIR + string + default intel/dcp847ske + +config MAINBOARD_PART_NUMBER + string + default "Intel NUC DCP847SKE" + +config VGA_BIOS_FILE + string + default "pci8086,0106.rom" + +config VGA_BIOS_ID + string + default "8086,0106" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x2044 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x8086 + +config MAX_CPUS + int + default 2 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config IFD_GBE_SECTION + string + default "0x00001000:0x00002fff" + +config IFD_ME_SECTION + string + default "0x00003000:0x001bffff" + +config IFD_BIOS_SECTION + string + default "0x001c0000:0x007fffff" + +config CBFS_SIZE + hex + default 0x00640000 + +config MAINBOARD_SMBIOS_MANUFACTURER + string + default "Intel Corporation" + +config MAINBOARD_SMBIOS_PRODUCT_NAME + string + default "DCP847SKE" + +endif # BOARD_INTEL_DCP847SKE diff --git a/src/mainboard/intel/dcp847ske/Kconfig.name b/src/mainboard/intel/dcp847ske/Kconfig.name new file mode 100644 index 0000000000..e55b90d039 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_INTEL_DCP847SKE + bool "Intel NUC DCP847SKE" diff --git a/src/mainboard/intel/dcp847ske/Makefile.inc b/src/mainboard/intel/dcp847ske/Makefile.inc new file mode 100644 index 0000000000..96bac06a0a --- /dev/null +++ b/src/mainboard/intel/dcp847ske/Makefile.inc @@ -0,0 +1,4 @@ +romstage-y += early_southbridge.c +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads +smm-y += smihandler.c diff --git a/src/mainboard/intel/dcp847ske/acpi/ec.asl b/src/mainboard/intel/dcp847ske/acpi/ec.asl new file mode 100644 index 0000000000..09f905ee8f --- /dev/null +++ b/src/mainboard/intel/dcp847ske/acpi/ec.asl @@ -0,0 +1 @@ +/* Dummy file required by pch.asl - No license necessary. */ diff --git a/src/mainboard/intel/dcp847ske/acpi/platform.asl b/src/mainboard/intel/dcp847ske/acpi/platform.asl new file mode 100644 index 0000000000..ff5b176923 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/acpi/platform.asl @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + +/* The _WAK method is called on system wakeup */ +Method(_PTS,1) +{ +} diff --git a/src/mainboard/intel/dcp847ske/acpi/superio.asl b/src/mainboard/intel/dcp847ske/acpi/superio.asl new file mode 100644 index 0000000000..09f905ee8f --- /dev/null +++ b/src/mainboard/intel/dcp847ske/acpi/superio.asl @@ -0,0 +1 @@ +/* Dummy file required by pch.asl - No license necessary. */ diff --git a/src/mainboard/intel/dcp847ske/acpi_tables.c b/src/mainboard/intel/dcp847ske/acpi_tables.c new file mode 100644 index 0000000000..88c7019a2a --- /dev/null +++ b/src/mainboard/intel/dcp847ske/acpi_tables.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include "thermal.h" + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Enable USB ports in S3 by default */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* Enable USB ports in S5 by default */ + gnvs->s5u0 = 1; + gnvs->s5u1 = 1; + + // No LID: open by default. + gnvs->lids = 1; + + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} diff --git a/src/mainboard/intel/dcp847ske/board_info.txt b/src/mainboard/intel/dcp847ske/board_info.txt new file mode 100644 index 0000000000..32d4ebae2c --- /dev/null +++ b/src/mainboard/intel/dcp847ske/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2013 diff --git a/src/mainboard/intel/dcp847ske/devicetree.cb b/src/mainboard/intel/dcp847ske/devicetree.cb new file mode 100644 index 0000000000..4ff27fdd54 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/devicetree.cb @@ -0,0 +1,108 @@ +chip northbridge/intel/sandybridge + # IGD Displays + register "gfx.ndid" = "3" + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + + # Enable DisplayPort 1 Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DisplayPort 0 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Enable DVI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + device cpu_cluster 0x0 on + chip cpu/intel/socket_rPGA989 + device lapic 0x0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "1" + register "c2_battery" = "3" + register "c3_battery" = "5" + + register "c1_acpower" = "1" + register "c2_acpower" = "3" + register "c3_acpower" = "5" + end + end + device domain 0x0 on + device pci 00.0 on end # Host bridge Host bridge + device pci 01.0 off end # PCIe Bridge for discrete graphics + device pci 02.0 on end # Internal graphics VGA controller + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "sata_port_map" = "0x1" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + + register "gen1_dec" = "0x00fc0a01" # SuperIO @0xa00-0xaff + + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 off end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio Audio controller + device pci 1c.0 on end # PCIe Port #1 (unused) + device pci 1c.1 on end # PCIe Port #2 (full-length mPCIe/mSATA) + device pci 1c.2 on end # PCIe Port #3 (half-length mPCIe) + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge PCI-LPC bridge + chip superio/nuvoton/nct6776 + device pnp 4e.0 off end # Floppy + device pnp 4e.1 off end # Parallel port + device pnp 4e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 off end # COM2, IR + device pnp 4e.5 off end # Keyboard + device pnp 4e.6 off end # CIR + device pnp 4e.7 on end # GPIO6 + device pnp 4e.107 on end # GPIO7 + device pnp 4e.207 off end # GPIO8 + device pnp 4e.307 off end # GPIO9 + device pnp 4e.8 off end # WDT + device pnp 4e.108 on end # GPIO0 + device pnp 4e.208 off end # GPIOA + device pnp 4e.308 on # GPIOBASE + io 0x60 = 0xa80 + end + device pnp 4e.109 off end # GPIO1 + device pnp 4e.209 on end # GPIO2 + device pnp 4e.309 off end # GPIO3 + device pnp 4e.409 off end # GPIO4 + device pnp 4e.509 off end # GPIO5 + device pnp 4e.609 off end # GPIO6 + device pnp 4e.709 off end # GPIO7 + device pnp 4e.a on end # ACPI + device pnp 4e.b on # HWM, front pannel LED + io 0x60 = 0xa30 + io 0x62 = 0 # unused + end + device pnp 4e.d off end # VID + device pnp 4e.e off end # CIR WAKE-UP + device pnp 4e.f off end # GPIO + device pnp 4e.14 off end # SVID + device pnp 4e.16 off end # Deep sleep + device pnp 4e.17 off end # GPIOA + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/intel/dcp847ske/dsdt.asl b/src/mainboard/intel/dcp847ske/dsdt.asl new file mode 100644 index 0000000000..f637648a28 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/dsdt.asl @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, // DSDT revision: ACPI v3.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + #include + #include + /* global NVS and variables. */ + #include + #include + + Scope (\_SB) { + Device (PCI0) + { + #include + #include + #include + #include + } + } +} diff --git a/src/mainboard/intel/dcp847ske/early_southbridge.c b/src/mainboard/intel/dcp847ske/early_southbridge.c new file mode 100644 index 0000000000..b15f11f4de --- /dev/null +++ b/src/mainboard/intel/dcp847ske/early_southbridge.c @@ -0,0 +1,197 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include "northbridge/intel/sandybridge/raminit_native.h" + +#include "superio.h" +#include "thermal.h" + +#if IS_ENABLED(CONFIG_DISABLE_UART_ON_TESTPADS) +#define DEBUG_UART_EN 0 +#else +#define DEBUG_UART_EN COMA_LPC_EN +#endif + +void pch_enable_lpc(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, + CNF2_LPC_EN | DEBUG_UART_EN); + /* Decode SuperIO 0x0a00 */ + pci_write_config32(PCI_DEV(0, 0x1f, 0), LPC_GEN1_DEC, 0x00fc0a01); +} + +void rcba_config(void) +{ + /* Disable devices */ + RCBA32(FD) |= PCH_DISABLE_ALWAYS | PCH_DISABLE_P2P | PCH_DISABLE_XHCI; + +#if IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT) + /* Enable Gigabit Ethernet */ + if (RCBA32(BUC) & PCH_DISABLE_GBE) { + RCBA32(BUC) &= ~PCH_DISABLE_GBE; + /* Datasheet says clearing the bit requires a reset after */ + printk(BIOS_DEBUG, "Enabled gigabit ethernet, reset once.\n"); + outb(0xe, 0xcf9); + halt(); + } +#endif + + /* Set "mobile" bit in MCH (which makes sense layout-wise). */ + /* Note sure if this has any effect at all though. */ + MCHBAR32(0x0004) |= 0x00001000; + MCHBAR32(0x0104) |= 0x00001000; +} + +void mainboard_early_init(int s3resume) +{ +} + +static const u16 hwm_initvals[] = { + HWM_BANK(0), + HWM_INITVAL(0xae, 0x01), /* Enable PECI Agent0 */ + + HWM_BANK(7), /* PECI */ + HWM_INITVAL(0x01, 0x95), /* Enable PECI */ + HWM_INITVAL(0x03, 0x10), /* Enable Agent 0 */ + /* + * PECI temperatures are negative, going up to 0. + * 0 represents the maximum allowable junction temperature, Tjmax. + * There is also Tcontrol, which is the temperature at which the + * system cooling should run at full speed. + * Since the NCT5577D fan control only supports positive values, + * Tbase0 is used as an offset. + */ + HWM_INITVAL(0x09, CRITICAL_TEMPERATURE), /* Tbase0 */ + + HWM_BANK(2), /* CPUFAN control */ + HWM_INITVAL(0x00, 0x0c), /* PECI Agent 0 as CPUFAN monitoring source */ + HWM_INITVAL(0x01, 50), /* Target temperature */ + HWM_INITVAL(0x02, 0x40), /* Enable Smart Fan IV mode */ + HWM_INITVAL(0x03, 0x01), /* Step-up time */ + HWM_INITVAL(0x04, 0x01), /* Step-down time */ + HWM_INITVAL(0x05, 0x10), /* Stop PWM value */ + HWM_INITVAL(0x06, 0x20), /* Start PWM value */ + HWM_INITVAL(0x21, 45), /* Smart Fan IV Temp1 */ + HWM_INITVAL(0x22, 46), /* Smart Fan IV Temp2 */ + HWM_INITVAL(0x23, 47), /* Smart Fan IV Temp3 */ + HWM_INITVAL(0x24, PASSIVE_TEMPERATURE), /* Smart Fan IV Temp4 */ + HWM_INITVAL(0x27, 0x01), /* Smart Fan IV PWM1 */ + HWM_INITVAL(0x28, 0x02), /* Smart Fan IV PWM2 */ + HWM_INITVAL(0x29, 0x03), /* Smart Fan IV PWM3 */ + HWM_INITVAL(0x2a, 0xff), /* Smart Fan IV PWM4 */ + /* Smart Fan IV Critical temp */ + HWM_INITVAL(0x35, CRITICAL_TEMPERATURE), + HWM_INITVAL(0x38, 3), /* Smart Fan IV Critical temp tolerance */ + HWM_INITVAL(0x39, 0x81), /* Enable SYSTIN weight value */ + HWM_INITVAL(0x3a, 1), /* SYSTIN temperature step */ + HWM_INITVAL(0x3b, 2), /* SYSTIN step tolerance */ + HWM_INITVAL(0x3c, 1), /* SYSTIN weight step */ + HWM_INITVAL(0x3d, 40), /* SYSTIN temperature base */ + HWM_INITVAL(0x3e, 0x00), /* SYSTIN fan duty base */ + + HWM_BANK(0), +}; + +static void hwm_init(void) +{ + /* Set up fan control */ + for (int i = 0; i < ARRAY_SIZE(hwm_initvals); i++) + HWM_WRITE_INITVAL(hwm_initvals[i]); +} + +static const u16 superio_initvals[] = { + /* Global config registers */ + SUPERIO_INITVAL(0x1a, 0x02), + SUPERIO_INITVAL(0x1b, 0x6a), + SUPERIO_INITVAL(0x27, 0x80), +#if IS_ENABLED(CONFIG_DISABLE_UART_ON_TESTPADS) + SUPERIO_INITVAL(0x2a, 0x80), +#else + SUPERIO_INITVAL(0x2a, 0x00), +#endif + SUPERIO_INITVAL(0x2c, 0x00), + + SUPERIO_BANK(2), /* UART A */ + SUPERIO_INITVAL(0x30, 0x01), + SUPERIO_INITVAL(0x60, 0x03), + SUPERIO_INITVAL(0x61, 0xf8), + SUPERIO_INITVAL(0x70, 0x04), + + SUPERIO_BANK(7), /* GPIO config */ + SUPERIO_INITVAL(0x30, 0x01), + SUPERIO_INITVAL(0xe0, 0xcf), + SUPERIO_INITVAL(0xe1, 0x0f), + SUPERIO_INITVAL(0xe4, 0xed), + SUPERIO_INITVAL(0xe5, 0x4d), + SUPERIO_INITVAL(0xec, 0x30), + SUPERIO_INITVAL(0xee, 0xff), + + SUPERIO_BANK(8), + SUPERIO_INITVAL(0x30, 0x0a), + SUPERIO_INITVAL(0x60, GPIO_PORT >> 8), + SUPERIO_INITVAL(0x61, GPIO_PORT & 0xff), + + SUPERIO_BANK(9), + SUPERIO_INITVAL(0x30, 0x8c), + SUPERIO_INITVAL(0xe1, 0x90), + + SUPERIO_BANK(0xa), + SUPERIO_INITVAL(0xe4, 0x20), + SUPERIO_INITVAL(0xe6, 0x4c), + + SUPERIO_BANK(0xb), /* HWM & LED */ + SUPERIO_INITVAL(0x30, 0x01), + SUPERIO_INITVAL(0x60, HWM_PORT >> 8), + SUPERIO_INITVAL(0x61, HWM_PORT & 0xff), + SUPERIO_INITVAL(0xf7, 0x67), + SUPERIO_INITVAL(0xf8, 0x60), + + SUPERIO_BANK(0x16), + SUPERIO_INITVAL(0x30, 0x00), +}; + +static void superio_init(void) +{ + SUPERIO_UNLOCK; + for (int i = 0; i < ARRAY_SIZE(superio_initvals); i++) + SUPERIO_WRITE_INITVAL(superio_initvals[i]); + SUPERIO_LOCK; +} + +void mainboard_config_superio(void) +{ + superio_init(); + hwm_init(); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[2], 0x51, id_only); +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { +#define USB_CONFIG(enabled, current, ocpin) { enabled, current, ocpin } +#include "usb.h" +}; diff --git a/src/mainboard/intel/dcp847ske/gma-mainboard.ads b/src/mainboard/intel/dcp847ske/gma-mainboard.ads new file mode 100644 index 0000000000..493051edd6 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/gma-mainboard.ads @@ -0,0 +1,28 @@ +-- This file is part of the coreboot project. +-- +-- Copyright (C) 2017 Tobias Diedrich +-- +-- This program is free software; you can redistribute it and/or +-- modify it under the terms of the GNU General Public License as +-- published by the Free Software Foundation; version 2 of +-- the License. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (HDMI1, + HDMI3, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/intel/dcp847ske/gpio.c b/src/mainboard/intel/dcp847ske/gpio.c new file mode 100644 index 0000000000..5b07d8032d --- /dev/null +++ b/src/mainboard/intel/dcp847ske/gpio.c @@ -0,0 +1,209 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_NATIVE, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_NATIVE, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, /* BIOS jumper: 1 = normal, 0 = setup */ + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, +}; + +/* + * GPIO8: RAM voltage: LOW: 1.5V, HIGH: 1.35V + * GPIO27: Set to HIGH on S3/S4/S5 by original fw dsdt. + * GPIO29: Actually NATIVE? Can't clear, stays 1. + * SLP_LAN# is affected by soft-strap according to docs. + * Others: No visible effect when toggling. + */ +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_HIGH, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio30 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_NATIVE, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_INPUT, /* mSATA presence detect */ + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio66 = GPIO_LEVEL_LOW, + .gpio68 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/intel/dcp847ske/hda_verb.c b/src/mainboard/intel/dcp847ske/hda_verb.c new file mode 100644 index 0000000000..b00034750c --- /dev/null +++ b/src/mainboard/intel/dcp847ske/hda_verb.c @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +const u32 cim_verb_data[] = { + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x58560020), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/dcp847ske/mainboard.c b/src/mainboard/intel/dcp847ske/mainboard.c new file mode 100644 index 0000000000..5dc4ab6b0f --- /dev/null +++ b/src/mainboard/intel/dcp847ske/mainboard.c @@ -0,0 +1,38 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +static void mainboard_enable(device_t dev) +{ + printk(BIOS_DEBUG, "Memory voltage: %s\n", + get_gpio(8) ? "1.35V" : "1.5V"); + printk(BIOS_DEBUG, "BIOS_CFG jumper: %s\n", + get_gpio(22) ? "normal (1-2)" : "setup (2-3)"); + printk(BIOS_DEBUG, "mSATA: %s\n", + get_gpio(35) ? "present" : "absent"); + + install_intel_vga_int15_handler( + GMA_INT15_ACTIVE_LFP_NONE, GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/dcp847ske/romstage.c b/src/mainboard/intel/dcp847ske/romstage.c new file mode 100644 index 0000000000..ad31bba5ab --- /dev/null +++ b/src/mainboard/intel/dcp847ske/romstage.c @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#if IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT) +#include +#else +#include +#endif + +#if !IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT) +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + struct pei_data pei_data_template = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = CONFIG_HPET_ADDRESS, + .rcba = (uintptr_t)DEFAULT_RCBABASE, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .thermalbase = 0xfed08000, + .system_type = 0, // 0 Mobile, 1 Desktop/Server + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0x00, 0xa2, 0x00 }, + .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, + .ec_present = 0, + .gbe_enable = 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1333, + .usb_port_config = { +#define USB_CONFIG(enabled, current, ocpin) { enabled, ocpin, 0x040 * current } +#include "usb.h" + }, + }; + *pei_data = pei_data_template; +} + +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; +} +#endif diff --git a/src/mainboard/intel/dcp847ske/smihandler.c b/src/mainboard/intel/dcp847ske/smihandler.c new file mode 100644 index 0000000000..7ae3f3982f --- /dev/null +++ b/src/mainboard/intel/dcp847ske/smihandler.c @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include "superio.h" + +void mainboard_smi_sleep(u8 slp_typ) +{ + if (slp_typ > 0 && slp_typ < 4) { + /* Enable GRN_LED [Power LED] fading */ + SUPERIO_UNLOCK; + SUPERIO_WRITE(0xf7, 0x68); + SUPERIO_LOCK; + } +} diff --git a/src/mainboard/intel/dcp847ske/superio.h b/src/mainboard/intel/dcp847ske/superio.h new file mode 100644 index 0000000000..56938e7026 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/superio.h @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DCP847SKE_SUPERIO_H +#define DCP847SKE_SUPERIO_H + +#include + +#define NUVOTON_PORT 0x4e +#define HWM_PORT 0x0a30 +#define GPIO_PORT 0x0a80 + +#define SUPERIO_BANK(x) (0x0700 | x) +#define SUPERIO_INITVAL(reg, data) ((reg << 8) | (data)) +#define HWM_BANK(x) (0x4e00 | x) +#define HWM_INITVAL SUPERIO_INITVAL + +#define SUPERIO_UNLOCK do { \ + outb(0x87, NUVOTON_PORT); \ + outb(0x87, NUVOTON_PORT); \ +} while (0) + +#define SUPERIO_LOCK do { \ + outb(0xaa, NUVOTON_PORT); \ +} while (0) + +#define SUPERIO_WRITE(reg, data) do { \ + outb((reg), NUVOTON_PORT); \ + outb((data), NUVOTON_PORT + 1); \ +} while (0) + +#define SUPERIO_WRITE_INITVAL(val) SUPERIO_WRITE((val) >> 8, (val) & 0xff) + +#define HWM_WRITE(reg, data) do { \ + outb((reg), HWM_PORT + 5); \ + outb((data), HWM_PORT + 6); \ +} while (0) + +#define HWM_WRITE_INITVAL(val) HWM_WRITE((val) >> 8, (val) & 0xff) + +#endif /* DCP847SKE_SUPERIO_H */ diff --git a/src/mainboard/intel/dcp847ske/thermal.h b/src/mainboard/intel/dcp847ske/thermal.h new file mode 100644 index 0000000000..914b3232a4 --- /dev/null +++ b/src/mainboard/intel/dcp847ske/thermal.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DCP847SKE_THERMAL_H +#define DPC847SKE_THERMAL_H + +/* TODO: These should be generated at runtime from + * MSR_TEMPERATURE_TARGET (0x1a2) */ + +/* Temperature which OS will shutdown at (Tjmax) */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU (Tcontrol) */ +#define PASSIVE_TEMPERATURE 86 + +#endif diff --git a/src/mainboard/intel/dcp847ske/usb.h b/src/mainboard/intel/dcp847ske/usb.h new file mode 100644 index 0000000000..c6a529562a --- /dev/null +++ b/src/mainboard/intel/dcp847ske/usb.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DCP847SKE_USB_H +#define DPC847SKE_USB_H + +USB_CONFIG(1, 1, 0), /* back, towards HDMI plugs */ +USB_CONFIG(1, 1, 0), /* back, towards power plug */ +USB_CONFIG(1, 1, 1), /* half-width miniPCIe */ +USB_CONFIG(1, 1, 1), /* full-width miniPCIe */ +USB_CONFIG(1, 1, 2), /* front-panel header */ +USB_CONFIG(1, 1, 2), /* front-panel header */ +USB_CONFIG(1, 1, 3), /* front connector */ +USB_CONFIG(0, 1, 3), /* not available */ +USB_CONFIG(0, 1, 4), /* not available */ +USB_CONFIG(0, 1, 4), /* not available */ +USB_CONFIG(0, 1, 5), /* not available */ +USB_CONFIG(0, 1, 5), /* not available */ +USB_CONFIG(0, 1, 6), /* not available */ +USB_CONFIG(0, 1, 6), /* not available */ + +#endif -- cgit v1.2.3