From 218a6864ff9528ecdb381d91991c9045bbb6843f Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Fri, 11 Jan 2013 09:54:55 -0800 Subject: Add Intel Whitetip Mountain 1 mainboard Lots of things are still placeholder and need work. Due to the useful GPIOs being run to either the EC or the SIO1007 I have hard coded developer mode on and recovery mode off. Change-Id: I4c308bd90db03ac5bffdfde566e5adbbaabac632 Signed-off-by: Duncan Laurie Reviewed-on: http://review.coreboot.org/2724 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/mainboard/intel/wtm1/romstage.c | 248 ++++++++++++++++++++++++++++++++++++ 1 file changed, 248 insertions(+) create mode 100644 src/mainboard/intel/wtm1/romstage.c (limited to 'src/mainboard/intel/wtm1/romstage.c') diff --git a/src/mainboard/intel/wtm1/romstage.c b/src/mainboard/intel/wtm1/romstage.c new file mode 100644 index 0000000000..0190964b26 --- /dev/null +++ b/src/mainboard/intel/wtm1/romstage.c @@ -0,0 +1,248 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "northbridge/intel/haswell/haswell.h" +#include "northbridge/intel/haswell/raminit.h" +#include "southbridge/intel/lynxpoint/me.h" +#include "southbridge/intel/lynxpoint/pch.h" +#include "southbridge/intel/lynxpoint/lp_gpio.h" +#include +#include +#include +#include "gpio.h" +#if CONFIG_CHROMEOS +#include +#endif + +const struct rcba_config_instruction rcba_config[] = { + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQA + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), + RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), + RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), + RCBA_SET_REG_32(D25IP, (NOINT << D25IP_LIP)), + RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), + RCBA_SET_REG_32(D20IR, (INTA << D20IP_XHCI)), + + /* Device interrupt route registers */ + RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQF, PIRQG, PIRQH, PIRQA)), + RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG)), + RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE)), + RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQH, PIRQA, PIRQB)), + RCBA_SET_REG_32(D26IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)), + RCBA_SET_REG_32(D25IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQA, 0, 0, 0)), + + /* Disable unused devices (board specific) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +void main(unsigned long bist) +{ + int boot_mode = 0; + int wake_from_s3; + int cbmem_was_initted; + +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t before_dram_time; + tsc_t after_dram_time; + tsc_t base_time = { + .lo = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xdc), + .hi = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0) + }; +#endif + struct pei_data pei_data = { + pei_version: PEI_VERSION, + mchbar: DEFAULT_MCHBAR, + dmibar: DEFAULT_DMIBAR, + epbar: DEFAULT_EPBAR, + pciexbar: DEFAULT_PCIEXBAR, + smbusbar: SMBUS_IO_BASE, + wdbbar: 0x4000000, + wdbsize: 0x1000, + hpet_address: HPET_ADDR, + rcba: DEFAULT_RCBA, + pmbase: DEFAULT_PMBASE, + gpiobase: DEFAULT_GPIOBASE, + temp_mmio_base: 0xfed08000, + system_type: 5, /* ULT */ + tseg_size: CONFIG_SMM_TSEG_SIZE, + spd_addresses: { 0xa0, 0xa2, 0xa4, 0xa6 }, + ec_present: 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + dimm_channel0_disabled: 2, + dimm_channel1_disabled: 2, + max_ddr3_freq: 1600, + usb_port_config: { + { 1, 0, 0x0040 }, /* P0: */ + { 1, 0, 0x0040 }, /* P1: */ + { 1, 0, 0x0040 }, /* P2: */ + { 1, 0, 0x0040 }, /* P3: */ + { 1, 0, 0x0040 }, /* P4: */ + { 1, 0, 0x0040 }, /* P5: */ + { 1, 0, 0x0040 }, /* P6: */ + { 1, 0, 0x0040 }, /* P7: */ + { 1, 0, 0x0040 }, /* P8: */ + { 1, 0, 0x0040 }, /* P9: */ + { 1, 0, 0x0040 }, /* P10: */ + { 1, 0, 0x0000 }, /* P11: */ + { 1, 0, 0x0040 }, /* P12: */ + { 1, 0, 0x0040 }, /* P13: */ + }, + }; + +#if CONFIG_COLLECT_TIMESTAMPS + start_romstage_time = rdtsc(); +#endif + + if (bist == 0) + enable_lapic(); + + wake_from_s3 = early_pch_init(&mainboard_gpio_map, &rcba_config[0]); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + haswell_early_initialization(HASWELL_MOBILE); + printk(BIOS_DEBUG, "Back from haswell_early_initialization()\n"); + + if (wake_from_s3) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; +#else + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); +#endif + } + + /* Prepare USB controller early in S3 resume */ + if (boot_mode == 2) + enable_usb_bar(); + + post_code(0x3a); + pei_data.boot_mode = boot_mode; +#if CONFIG_COLLECT_TIMESTAMPS + before_dram_time = rdtsc(); +#endif + + report_platform_info(); + + sdram_initialize(&pei_data); + +#if CONFIG_COLLECT_TIMESTAMPS + after_dram_time = rdtsc(); +#endif + post_code(0x3b); + + intel_early_me_status(); + + quick_ram_check(); + post_code(0x3e); + + MCHBAR16(SSKPD) = 0xCAFE; +#if CONFIG_EARLY_CBMEM_INIT + cbmem_was_initted = !cbmem_initialize(); +#else + cbmem_was_initted = cbmem_reinit((uint64_t) (get_top_of_ram() + - HIGH_MEMORY_SIZE)); +#endif + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + + *(u32 *)CBMEM_BOOT_MODE = 0; + *(u32 *)CBMEM_RESUME_BACKUP = 0; + + if ((boot_mode == 2) && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + if (resume_backup_memory) { + *(u32 *)CBMEM_BOOT_MODE = boot_mode; + *(u32 *)CBMEM_RESUME_BACKUP = (u32)resume_backup_memory; + } + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); + } else if (boot_mode == 2) { + /* Failed S3 resume, reset to come up cleanly */ + outb(0x6, 0xcf9); + while (1) { + hlt(); + } + } else { + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); + } +#endif + post_code(0x3f); +#if CONFIG_CHROMEOS + init_chromeos(boot_mode); +#endif +#if CONFIG_COLLECT_TIMESTAMPS + timestamp_init(base_time); + timestamp_add(TS_START_ROMSTAGE, start_romstage_time ); + timestamp_add(TS_BEFORE_INITRAM, before_dram_time ); + timestamp_add(TS_AFTER_INITRAM, after_dram_time ); + timestamp_add_now(TS_END_ROMSTAGE); +#endif +#if CONFIG_CONSOLE_CBMEM + /* Keep this the last thing this function does. */ + cbmemc_reinit(); +#endif +} -- cgit v1.2.3