From 6b78b73d79265923cae507e8bd696646ee5ffa7d Mon Sep 17 00:00:00 2001 From: V Sowmya Date: Mon, 22 Jan 2018 20:23:16 +0530 Subject: mb/intel/kblrvp: Enable Kabylake RVP8 Add support for KBL RVP8 board * Add KBL RVP8 support in Konfig. * Add KBL RVP8 config option in make menuconfig. * Add descriptor and ME binary paths for RVP8 in Kconfig. * Add RVP8 board name Kconfig.name. * Add devicetree.cb for RVP8 in the variants path. * Add gpio.h for RVP8 in variants/include/variant path. TEST= Build and boot RVP8. Change-Id: I6ba177c223f6aa3285c0fe5eba0cd55b2a50c4ed Signed-off-by: V Sowmya Reviewed-on: https://review.coreboot.org/23383 Reviewed-by: Furquan Shaikh Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik --- .../intel/kblrvp/variants/rvp8/devicetree.cb | 272 +++++++++++++++++++++ .../kblrvp/variants/rvp8/include/variant/gpio.h | 183 ++++++++++++++ 2 files changed, 455 insertions(+) create mode 100644 src/mainboard/intel/kblrvp/variants/rvp8/devicetree.cb create mode 100644 src/mainboard/intel/kblrvp/variants/rvp8/include/variant/gpio.h (limited to 'src/mainboard/intel/kblrvp/variants') diff --git a/src/mainboard/intel/kblrvp/variants/rvp8/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp8/devicetree.cb new file mode 100644 index 0000000000..2a2d761af1 --- /dev/null +++ b/src/mainboard/intel/kblrvp/variants/rvp8/devicetree.cb @@ -0,0 +1,272 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "PmTimerDisabled" = "0" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s + register "PmConfigSlpS3MinAssert" = "0x02" + + # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s + register "PmConfigSlpS4MinAssert" = "0x04" + + # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s + register "PmConfigSlpSusMinAssert" = "0x03" + + # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s + register "PmConfigSlpAMinAssert" = "0x03" + + # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled + register "SerialIrqConfigSirqEnable" = "0x01" + register "SerialIrqConfigSirqMode" = "0x01" + + # VR Settings Configuration for 5 Domains + #+----------------+-------+-------+-------------+-------------+-------+ + #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x10, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 0x0 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 0x0 \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0 ,\ + .voltage_limit = 0x0 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 0x0 \ + }" + + register "FspSkipMpInit" = "1" + + # Enable Root port. + register "PcieRpEnable[3]" = "1" + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[8]" = "1" + register "PcieRpEnable[16]" = "1" + + # Enable CLKREQ# + register "PcieRpClkReqSupport[3]" = "1" + register "PcieRpClkReqSupport[4]" = "1" + register "PcieRpClkReqSupport[8]" = "1" + register "PcieRpClkReqSupport[16]" = "1" + + # SRCCLKREQ# + register "PcieRpClkReqNumber[3]" = "2" + register "PcieRpClkReqNumber[4]" = "1" + register "PcieRpClkReqNumber[8]" = "6" + register "PcieRpClkReqNumber[16]" = "7" + + register "usb2_ports[0]" = "USB2_PORT_MAX(OC2)" # Type-C Port + register "usb2_ports[1]" = "USB2_PORT_MAX(OC5)" # Front panel + register "usb2_ports[2]" = "USB2_PORT_MAX(OC4)" # Back panel + register "usb2_ports[3]" = "USB2_PORT_MAX(OC4)" # Back panel + register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Back panel-1 + register "usb2_ports[5]" = "USB2_PORT_MAX(OC1)" # Back panel + register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel + register "usb2_ports[7]" = "USB2_PORT_MAX(OC_SKIP)" # Front panel + register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # M.2 BT + register "usb2_ports[9]" = "USB2_PORT_MAX(OC2)" # Front panel + register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel + register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel-1 + register "usb2_ports[12]" = "USB2_PORT_MAX(OC3)" # Back panel + register "usb2_ports[13]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Back panel + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Back panel + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC0)" # Back panel-2 + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Front Panel + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC2)" # Front Panel + register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC2)" # Front Panel + register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC3)" # Back panel + register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" # LAN + + register "SsicPortEnable" = "1" # Enable SSIC for WWAN + + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable" = "{ \ + [0] = 1, \ + [1] = 1, \ + [2] = 1, \ + [3] = 1, \ + [4] = 1, \ + [5] = 1, \ + [6] = 1, \ + [7] = 1, \ + }" + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoLegacyUart, \ + }" + + # PL2 override 25W + register "tdp_pl2_override" = "25" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Enable/Disable VMX feature + register "VmxEnable" = "0" + + # Use default SD card detect GPIO configuration + #register "sdcard_cd_gpio_default" = "GPP_D10" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 on end # I2C #2 + device pci 15.3 on end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 on end # I2C #5 + device pci 19.2 on end # I2C #4 + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 on end # PCI Express Port 3 + device pci 1c.3 on end # PCI Express Port 4 + device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.2 on end # GSPI #0 + device pci 1e.3 on end # GSPI #1 + device pci 1e.4 off end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + #chip drivers/pc80/tpm + # device pnp 0c31.0 on end + #end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE + end +end diff --git a/src/mainboard/intel/kblrvp/variants/rvp8/include/variant/gpio.h b/src/mainboard/intel/kblrvp/variants/rvp8/include/variant/gpio.h new file mode 100644 index 0000000000..f8db6cd258 --- /dev/null +++ b/src/mainboard/intel/kblrvp/variants/rvp8/include/variant/gpio.h @@ -0,0 +1,183 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _GPIORVP8_H +#define _GPIORVP8_H + +#include +#include + +/* TCA6424A I/O Expander */ +#define IO_EXPANDER_BUS 4 +#define IO_EXPANDER_0_ADDR 0x22 +#define IO_EXPANDER_P0CONF 0x0C /* Port 0 conf offset */ +#define IO_EXPANDER_P0DOUT 0x04 /* Port 0 data offset */ +#define IO_EXPANDER_P1CONF 0x0D +#define IO_EXPANDER_P1DOUT 0x05 +#define IO_EXPANDER_P2CONF 0x0E +#define IO_EXPANDER_P2DOUT 0x06 +#define IO_EXPANDER_1_ADDR 0x23 + +/* GPE_EC_WAKE */ +#define GPE_EC_WAKE GPE0_LAN_WAK +#define EC_SMI_GPI GPP_I3 + +/* + * Gpio based irq for touchpad, 18th index in North Bank + * MAX_DIRECT_IRQ + GPSW_SIZE + 19 + */ +#define KBLRVP_TOUCHPAD_IRQ 33 + +#define KBLRVP_TOUCH_IRQ 31 + +#define BOARD_TOUCHPAD_NAME "touchpad" +#define BOARD_TOUCHPAD_IRQ KBLRVP_TOUCHPAD_IRQ +#define BOARD_TOUCHPAD_I2C_BUS 0 +#define BOARD_TOUCHPAD_I2C_ADDR 0x20 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ KBLRVP_TOUCH_IRQ +#define BOARD_TOUCHSCREEN_I2C_BUS 0 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4c + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { +/* EC_PCH_RCIN */ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF3), +/* EC_LPC_IO0 */ PAD_CFG_NF(GPP_A1, 20K_PU, DEEP, NF3), +/* EC_LPC_IO1*/ PAD_CFG_NF(GPP_A2, 20K_PU, DEEP, NF3), +/* EC_LPC_IO2 */ PAD_CFG_NF(GPP_A3, 20K_PU, DEEP, NF3), +/* EC_LPC_IO3 */ PAD_CFG_NF(GPP_A4, 20K_PU, DEEP, NF3), +/* LPC_FRAME */ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF3), +/* LPC_SERIRQ */ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF3), +/* PIRQAB */ PAD_CFG_GPI(GPP_A7, NONE, DEEP), +/* LPC_CLKRUN */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), +/* EC_LPC_CLK */ PAD_CFG_NF(GPP_A9, NONE, DEEP, NF3), +/* PCH_LPC_CLK */ PAD_CFG_NF(GPP_A10, 20K_PD, DEEP, NF1), +/* PMEB */ PAD_CFG_GPI(GPP_A11, NONE, DEEP), +/* SUS_PWR_ACK_R */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), +/* PM_SUS_ESPI_RST */ PAD_CFG_NF(GPP_A14, NONE, DEEP, NF3), +/* PCH_SUSACK */ PAD_CFG_NF(GPP_A15, 20K_PU, DEEP, NF1), +/* BT_RF_KILL */ PAD_CFG_GPO(GPP_B3, 1, DEEP), +/* EXTTS_SNI_DRV1 */ PAD_CFG_NF(GPP_B4, NONE, DEEP, NF1), +/* SRCCLKREQ0# */ PAD_CFG_GPI_ACPI_SCI(GPP_B5, NONE, DEEP, YES), +/* PM_SLP_S0 */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), +/* PCH_PLT_RST */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), +/* GPP_B_14_SPKR */ PAD_CFG_NF(GPP_B14, 20K_PD, DEEP, NF1), +/* GSPI0_MISO */ PAD_CFG_GPO(GPP_B17, 1, DEEP), +/* PCHHOTB */ PAD_CFG_NF(GPP_B23, 20K_PD, DEEP, NF2), +/* SMB_CLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), +/* SMB_DATA */ PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), +/* SMBALERT# */ PAD_CFG_GPO(GPP_C2, 1, DEEP), +/* SML0_CLK */ PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), +/* SML0_DATA */ PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), +/* SML1_CLK */ PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1), +/* SML1_DATA */ PAD_CFG_NF(GPP_C7, NONE, DEEP, NF1), +/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), +/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), +/* UART0_RTS_N */ PAD_CFG_NF(GPP_C10, NONE, DEEP, NF1), +/* UART0_CTS_N */ PAD_CFG_NF(GPP_C11, NONE, DEEP, NF1), +/* GD_UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), +/* GD_UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), +/* UART2_RTS_N */ PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1), +/* UART2_CTS_N */ PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1), +/* SSP0_SFRM */ PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), +/* SSP0_TXD */ PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), +/* SSP0_RXD */ PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), +/* SSP0_SCLK */ PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), +/* SATAE_IFDET */ PAD_CFG_NF(GPP_E0, 20K_PU, DEEP, NF1), +/* SATAE_IFDET */ PAD_CFG_NF(GPP_E1, 20K_PU, DEEP, NF1), +/* CPU_GP0 */ PAD_CFG_NF(GPP_E3, NONE, DEEP, NF1), +/* SSD_SATA_DEVSLP */ PAD_CFG_NF(GPP_E4, NONE, DEEP, NF1), +/* SATALED# */ PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1), +/* USB2_OC_0 */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), +/* USB2_OC_1 */ PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), +/* USB2_OC_2 */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), +/* USB2_OC_3 */ PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), +/* SATAXPCIE_4 */ PAD_CFG_NF(GPP_F1, 20K_PU, DEEP,NF1), +/* SATA_DEVSLP_3 */ PAD_CFG_GPI_ACPI_SCI(GPP_F5, NONE, DEEP, YES), +/* SATA_DEVSLP_4 */ PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), +/* SATA_SCLOCK */ PAD_CFG_GPI_APIC(GPP_F10, NONE, DEEP), +/* SATA_SLOAD */ PAD_CFG_GPI(GPP_F11, NONE, DEEP), +/* SATA_SDATAOUT1 */ PAD_CFG_GPI_APIC(GPP_F12, NONE, DEEP), +/* SATA_SDATAOUT0 */ PAD_CFG_GPI_APIC(GPP_F13, NONE, DEEP), +/* H_SKTOCC_N */ PAD_CFG_GPI_APIC(GPP_F14, NONE, DEEP), +/* USB_OC4_R_N */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), +/* USB_OC5_R_N */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), +/* USB_OC6_R_N */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), +/* USB_OC7_R_N */ PAD_CFG_GPO(GPP_F18, 1, DEEP), +/* GPIO_PEG_RESET */ PAD_CFG_GPO(GPP_F22, 1, DEEP), +/* VCORE_VBOOST_CTRL */ PAD_CFG_GPO(GPP_F23, 0, DEEP), +/* FAN_TACH_0 */ PAD_CFG_GPO(GPP_G0, 1, DEEP), +/* FAN_TACH_1 */ PAD_CFG_GPO(GPP_G1, 1, DEEP), +/* FAN_TACH_2 */ PAD_CFG_GPI_ACPI_SCI(GPP_G2, NONE, DEEP, YES), +/* FAN_TACH_3 */ PAD_CFG_GPI_ACPI_SCI(GPP_G3, NONE, DEEP, YES), +/* FAN_TACH_4 */ PAD_CFG_GPO(GPP_G4, 1, DEEP), +/* FAN_TACH_5 */ PAD_CFG_GPI_APIC(GPP_G5, NONE, DEEP), +/* FAN_TACH_6 */ PAD_CFG_GPI_ACPI_SCI(GPP_G6, NONE, DEEP, YES), +/* FAN_TACH_7 */ PAD_CFG_GPO(GPP_G7, 1, DEEP), +/* GSXDOUT */ PAD_CFG_GPI_ACPI_SCI(GPP_G12, 20K_PD, DEEP, YES), +/* GSXSLOAD */ PAD_CFG_GPO(GPP_G13, 1, DEEP), +/* GSXDIN */ PAD_CFG_GPI_ACPI_SCI(GPP_G14, NONE, DEEP, YES), +/* GSXSRESETB */ PAD_CFG_GPO(GPP_G15, 0, DEEP), +/* GSXCLK */ PAD_CFG_GPO(GPP_G16, 0, DEEP), +/* NMIB */ PAD_CFG_GPI_APIC(GPP_G18, NONE, DEEP), +/* SMIB */ PAD_CFG_NF(GPP_G19, NONE, DEEP, NF1), +/* TEST_SETUP_MENU */ PAD_CFG_GPI_APIC(GPP_G20, NONE, DEEP), +/* P_INTF_N */ PAD_CFG_GPI_ACPI_SCI(GPP_G21, NONE, DEEP, YES), +/* PCH_PEGSLOT1 */ PAD_CFG_GPO(GPP_G22, 1, DEEP), +/* IVCAM_DFU_R */ PAD_CFG_GPO(GPP_G23, 1, DEEP), +/* SRCCLKREQB_8 */ PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1), +/* SML2CLK */ PAD_CFG_GPI(GPP_H10, NONE, DEEP), +/* SML2DATA */ PAD_CFG_GPI(GPP_H11, NONE, DEEP), +/* SML3CLK */ PAD_CFG_GPI_APIC(GPP_H13, NONE, DEEP), +/* SML3DATA */ PAD_CFG_GPI_APIC(GPP_H14, NONE, DEEP), +/* SML3ALERTB */ PAD_CFG_GPI_APIC(GPP_H15, NONE, DEEP), +/* SML4DATA */ PAD_CFG_GPO(GPP_H17, 1, DEEP), +/* LED_DRIVE */ PAD_CFG_GPO(GPP_H23, 0, DEEP), +/* DDSP_HPD_0 */ PAD_CFG_NF(GPP_I0, NONE, DEEP, NF1), +/* DDSP_HPD_1 */ PAD_CFG_NF(GPP_I1, NONE, DEEP, NF1), +/* DDSP_HPD_2 */ PAD_CFG_NF(GPP_I2, NONE, DEEP, NF1), +/* DDSP_HPD_1 */ PAD_CFG_GPI_ACPI_SMI(GPP_I3, NONE, DEEP, YES), +/* DDPB_CTRLCLK */ PAD_CFG_NF(GPP_I5, NONE, DEEP, NF1), +/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_I6, 20K_PD, DEEP, NF1), +/* DDPC_CTRLCLK */ PAD_CFG_NF(GPP_I7, NONE, DEEP, NF1), +/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_I8, 20K_PD, DEEP, NF1), +/* DDPD_CTRLCLK */ PAD_CFG_NF(GPP_I9, NONE, DEEP, NF1), +/* DDPD_CTRLDATA */ PAD_CFG_NF(GPP_I10, 20K_PD, DEEP, NF1), +/* EC_PCH_ACPRESENT */ PAD_CFG_GPO(GPD1, 0, DEEP), +/* EC_PCH_WAKE */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1), +/* PM_PWRBTN_R_N */ PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1), +/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1), +/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1), +/* PM_SLP_SA# */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1), +/* USB_WAKEOUT_N */ PAD_CFG_NF(GPD7, NONE, DEEP, NF1), +/* PM_SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1), +/* PCH_SLP_WLAN# */ PAD_CFG_NF(GPD9, NONE, DEEP, NF1), +/* PM_SLP_S5# */ PAD_CFG_NF(GPD10, NONE, DEEP, NF1), +/* LANPHYC */ PAD_CFG_NF(GPD11, NONE, DEEP, NF1), + +}; + +/* Early pad configuration in romstage. */ +static const struct pad_config early_gpio_table[] = { +/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), +/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), +}; + + +#endif +#endif -- cgit v1.2.3