From 44e89af6e609874f2f18d30f1e66dce8b5a98eff Mon Sep 17 00:00:00 2001 From: Nico Huber Date: Sat, 23 Feb 2019 19:24:51 +0100 Subject: soc/intel/skylake: Unify serial IRQ options We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Matt DeVillier Reviewed-by: Furquan Shaikh --- src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'src/mainboard/intel/kblrvp/variants/rvp8') diff --git a/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb index 9753c64e26..8dbaf685a8 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb @@ -10,7 +10,8 @@ chip soc/intel/skylake register "ScsSdCardEnabled" = "0" register "HeciEnabled" = "0" register "PmTimerDisabled" = "0" - register "SerialIrqConfigSirqMode" = "0x01" + + register "serirq_mode" = "SERIRQ_CONTINUOUS" # VR Settings Configuration for 5 Domains #+----------------+-------+-------+-------------+-------------+-------+ -- cgit v1.2.3