From a5b10417e41267e34126b806ae7653c488217ad5 Mon Sep 17 00:00:00 2001 From: Barnali Sarkar Date: Mon, 28 Nov 2016 14:53:12 +0530 Subject: mb/intel/kblrvp: Add Variant board support for KBLRVP Add support of Variant board model for existing intel/kblrvp, since there might be more RVP board supports under intel/kblrvp. Existing is for KBL RVP3 board. BUG=none BRANCH=none TEST=Built and boot Kaby Lake RVP3 Change-Id: I041a07a273dbb77e422d48591f06b5f1011cd9f7 Signed-off-by: Barnali Sarkar Reviewed-on: https://review.coreboot.org/17630 Reviewed-by: Aaron Durbin Tested-by: build bot (Jenkins) --- .../intel/kblrvp/variants/rvp3/devicetree.cb | 262 +++++++++++++++++++++ 1 file changed, 262 insertions(+) create mode 100644 src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb (limited to 'src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb') diff --git a/src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb new file mode 100644 index 0000000000..c2dde4f526 --- /dev/null +++ b/src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb @@ -0,0 +1,262 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s5_enable" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "PmTimerDisabled" = "1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s + register "PmConfigSlpS3MinAssert" = "0x02" + + # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s + register "PmConfigSlpS4MinAssert" = "0x04" + + # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s + register "PmConfigSlpSusMinAssert" = "0x03" + + # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s + register "PmConfigSlpAMinAssert" = "0x03" + + # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled + register "SerialIrqConfigSirqEnable" = "0x01" + + # VR Settings Configuration for 5 Domains + #+----------------+-------+-------+-------------+-------------+-------+ + #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x1C, \ + .voltage_limit = 0x5F0 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x88, \ + .voltage_limit = 0x5F0 \ + }" + register "domain_vr_config[VR_RING]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x88, \ + .voltage_limit = 0x5F0, \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x8C ,\ + .voltage_limit = 0x5F0 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x8C, \ + .voltage_limit = 0x5F0 \ + }" + + register "FspSkipMpInit" = "1" + + # Enable Root ports. + # PCIE Port 1 x4 -> SLOT1 + register "PcieRpEnable[0]" = "1" + register "PcieRpClkReqSupport[0]" = "1" + register "PcieRpClkReqNumber[0]" = "2" + + # PCIE Port 5 x1 -> SLOT2/LAN + register "PcieRpEnable[4]" = "1" + register "PcieRpClkReqSupport[4]" = "1" + register "PcieRpClkReqNumber[4]" = "3" + + # PCIE Port 6 x1 -> SLOT3 + register "PcieRpEnable[5]" = "1" + register "PcieRpClkReqSupport[5]" = "1" + register "PcieRpClkReqNumber[5]" = "1" + + # PCIE Port 7 Disabled + # PCIE Port 8 Disabled + # PCIE Port 9 x1 -> WLAN + register "PcieRpEnable[8]" = "1" + register "PcieRpClkReqSupport[8]" = "1" + register "PcieRpClkReqNumber[8]" = "5" + + # PCIE Port 10 x1 -> WiGig + register "PcieRpEnable[9]" = "1" + register "PcieRpClkReqSupport[9]" = "1" + register "PcieRpClkReqNumber[9]" = "4" + + # USB 2.0 Enable all ports + register "usb2_ports[0]" = "USB2_PORT_MAX(OC0)" # TYPE-A Port + register "usb2_ports[1]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[2]" = "USB2_PORT_MAX(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MAX(OC_SKIP)" # Type-A Port + register "usb2_ports[5]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[7]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[9]" = "USB2_PORT_MAX(OC1)" # TYPE-A Port + register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + + # USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # TYPE-A Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # TYPE-A Port + register "usb3_ports[4]" = "USB3_PORT_EMPTY" # Disabled + register "usb3_ports[5]" = "USB3_PORT_EMPTY" # Disabled + + register "SsicPortEnable" = "1" # Enable SSIC for WWAN + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \ + }" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Enable/Disable VMX feature + register "VmxEnable" = "0" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 on end + device pci 1c.0 on end # PCI Express Port 1 x4 SLOT1 + device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN + device pci 1c.5 on end # PCI Express Port 6 x1 SLOT3 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 x1 WLAN + device pci 1d.1 on end # PCI Express Port 10 x1 WIGIG + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end -- cgit v1.2.3