From ec975b0a4fb1ec6c8633d20cb99e20f71909d40c Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Sun, 8 Jul 2018 19:17:38 -0500 Subject: google/cave: Add as a variant of glados Add google/cave (Asus Chromebook Flip C302SA) as a variant of glados Skylake reference board: - add cave-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/cave, verify correct functionality Change-Id: I5c5181ce68f7a24ccd49f53ecd9d48c081fd085a Signed-off-by: Matt DeVillier Reviewed-on: https://review.coreboot.org/27420 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/mainboard/google/glados/Kconfig | 4 + src/mainboard/google/glados/Kconfig.name | 6 + .../spd/micron_16GiB_dimm_MT52L1G32D4PG.spd.hex | 32 +++ .../spd/micron_4GiB_dimm_MT52L256M32D1PF.spd.hex | 32 +++ .../spd/micron_8GiB_dimm_MT52L512M32D2PF.spd.hex | 32 +++ .../google/glados/variants/cave/Makefile.inc | 43 +++ .../google/glados/variants/cave/board_info.txt | 6 + src/mainboard/google/glados/variants/cave/data.vbt | Bin 0 -> 4608 bytes .../google/glados/variants/cave/devicetree.cb | 303 +++++++++++++++++++++ .../variants/cave/include/variant/acpi/dptf.asl | 102 +++++++ .../cave/include/variant/acpi/mainboard.asl | 0 .../glados/variants/cave/include/variant/ec.h | 23 ++ .../glados/variants/cave/include/variant/gpio.h | 246 +++++++++++++++++ .../google/glados/variants/cave/variant.c | 67 +++++ 14 files changed, 896 insertions(+) create mode 100644 src/mainboard/google/glados/spd/micron_16GiB_dimm_MT52L1G32D4PG.spd.hex create mode 100644 src/mainboard/google/glados/spd/micron_4GiB_dimm_MT52L256M32D1PF.spd.hex create mode 100644 src/mainboard/google/glados/spd/micron_8GiB_dimm_MT52L512M32D2PF.spd.hex create mode 100644 src/mainboard/google/glados/variants/cave/Makefile.inc create mode 100644 src/mainboard/google/glados/variants/cave/board_info.txt create mode 100644 src/mainboard/google/glados/variants/cave/data.vbt create mode 100644 src/mainboard/google/glados/variants/cave/devicetree.cb create mode 100644 src/mainboard/google/glados/variants/cave/include/variant/acpi/dptf.asl create mode 100644 src/mainboard/google/glados/variants/cave/include/variant/acpi/mainboard.asl create mode 100644 src/mainboard/google/glados/variants/cave/include/variant/ec.h create mode 100644 src/mainboard/google/glados/variants/cave/include/variant/gpio.h create mode 100644 src/mainboard/google/glados/variants/cave/variant.c (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/glados/Kconfig b/src/mainboard/google/glados/Kconfig index 214ad13390..412aefed9e 100644 --- a/src/mainboard/google/glados/Kconfig +++ b/src/mainboard/google/glados/Kconfig @@ -37,6 +37,7 @@ config MAINBOARD_DIR config MAINBOARD_PART_NUMBER string default "Caroline" if BOARD_GOOGLE_CAROLINE + default "Cave" if BOARD_GOOGLE_CAVE default "Chell" if BOARD_GOOGLE_CHELL default "Glados" if BOARD_GOOGLE_GLADOS default "Lars" if BOARD_GOOGLE_LARS @@ -49,6 +50,7 @@ config MAINBOARD_FAMILY config VARIANT_DIR string default "caroline" if BOARD_GOOGLE_CAROLINE + default "cave" if BOARD_GOOGLE_CAVE default "chell" if BOARD_GOOGLE_CHELL default "glados" if BOARD_GOOGLE_GLADOS default "lars" if BOARD_GOOGLE_LARS @@ -57,6 +59,7 @@ config VARIANT_DIR config DEVICETREE string default "variants/caroline/devicetree.cb" if BOARD_GOOGLE_CAROLINE + default "variants/cave/devicetree.cb" if BOARD_GOOGLE_CAVE default "variants/chell/devicetree.cb" if BOARD_GOOGLE_CHELL default "variants/glados/devicetree.cb" if BOARD_GOOGLE_GLADOS default "variants/lars/devicetree.cb" if BOARD_GOOGLE_LARS @@ -91,6 +94,7 @@ config GBB_HWID string depends on CHROMEOS default "CAROLINE TEST 0958" if BOARD_GOOGLE_CAROLINE + default "CAVE TEST 9629" if BOARD_GOOGLE_CAVE default "CHELL TEST 6297" if BOARD_GOOGLE_CHELL default "GLADOS TEST 1988" if BOARD_GOOGLE_GLADOS default "LARS TEST 5001" if BOARD_GOOGLE_LARS diff --git a/src/mainboard/google/glados/Kconfig.name b/src/mainboard/google/glados/Kconfig.name index 8538a2b006..d20230e548 100644 --- a/src/mainboard/google/glados/Kconfig.name +++ b/src/mainboard/google/glados/Kconfig.name @@ -9,6 +9,12 @@ config BOARD_GOOGLE_CAROLINE select SAR_ENABLE select USE_SAR +config BOARD_GOOGLE_CAVE + bool "-> Cave (Asus Chromebook Flip C302SA)" + select BOARD_GOOGLE_BASEBOARD_GLADOS + select DRIVERS_GENERIC_MAX98357A + select NHLT_MAX98357 if INCLUDE_NHLT_BLOBS + config BOARD_GOOGLE_CHELL bool "-> Chell (HP Chromebook 13 G1)" select BOARD_GOOGLE_BASEBOARD_GLADOS diff --git a/src/mainboard/google/glados/spd/micron_16GiB_dimm_MT52L1G32D4PG.spd.hex b/src/mainboard/google/glados/spd/micron_16GiB_dimm_MT52L1G32D4PG.spd.hex new file mode 100644 index 0000000000..a4dbc16641 --- /dev/null +++ b/src/mainboard/google/glados/spd/micron_16GiB_dimm_MT52L1G32D4PG.spd.hex @@ -0,0 +1,32 @@ +91 20 F1 03 05 1A 05 0A +03 11 01 08 09 00 00 05 +78 78 90 50 90 11 50 E0 +90 06 3C 3C 01 90 00 00 +00 31 CA FA 00 00 00 A8 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2C 00 +00 00 00 00 00 00 2C 2A +4D 54 35 32 4C 31 47 33 +32 44 34 50 47 2D 31 30 +37 20 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/micron_4GiB_dimm_MT52L256M32D1PF.spd.hex b/src/mainboard/google/glados/spd/micron_4GiB_dimm_MT52L256M32D1PF.spd.hex new file mode 100644 index 0000000000..79970c932d --- /dev/null +++ b/src/mainboard/google/glados/spd/micron_4GiB_dimm_MT52L256M32D1PF.spd.hex @@ -0,0 +1,32 @@ +91 20 F1 03 05 19 05 03 +03 11 01 08 09 00 00 05 +78 78 90 50 90 11 50 E0 +90 06 3C 3C 01 90 00 00 +00 10 CA FA 00 00 00 A8 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2c 00 +00 00 00 00 00 00 75 8C +4D 54 35 32 4C 32 35 36 +4D 33 32 44 31 50 46 2D +31 30 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/micron_8GiB_dimm_MT52L512M32D2PF.spd.hex b/src/mainboard/google/glados/spd/micron_8GiB_dimm_MT52L512M32D2PF.spd.hex new file mode 100644 index 0000000000..27537096e1 --- /dev/null +++ b/src/mainboard/google/glados/spd/micron_8GiB_dimm_MT52L512M32D2PF.spd.hex @@ -0,0 +1,32 @@ +91 20 F1 03 05 19 05 0B +03 11 01 08 09 00 00 05 +78 78 90 50 90 11 50 E0 +90 06 3C 3C 01 90 00 00 +00 21 CA FA 00 00 00 A8 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2c 00 +00 00 00 00 00 00 3D 51 +4D 54 35 32 4C 35 31 32 +4D 33 32 44 32 50 46 2D +31 30 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/variants/cave/Makefile.inc b/src/mainboard/google/glados/variants/cave/Makefile.inc new file mode 100644 index 0000000000..f3b52c2398 --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/Makefile.inc @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2016 Google Inc. +## Copyright (C) 2016 Intel Corporation +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +romstage-y += variant.c +ramstage-y += variant.c +smm-y += variant.c + +SPD_BIN = $(obj)/spd.bin + +# SPD data by index. No method for board identification yet +SPD_SOURCES = micron_4GiB_dimm_MT52L256M32D1PF # 0b0000 +SPD_SOURCES += samsung_dimm_K4E8E324EB-EGCF # 0b0001 +SPD_SOURCES += micron_8GiB_dimm_MT52L512M32D2PF # 0b0010 +SPD_SOURCES += samsung_dimm_K4E6E304EB-EGCF # 0b0011 +SPD_SOURCES += micron_16GiB_dimm_MT52L1G32D4PG # 0b0100 +SPD_SOURCES += hynix_dimm_H9CCNNNCLTMLAR # 0b0101 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/glados/variants/cave/board_info.txt b/src/mainboard/google/glados/variants/cave/board_info.txt new file mode 100644 index 0000000000..1f62ea3f4b --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Google +Board name: Cave (Asus Chromebook Flip C302SA) +Category: laptop +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/google/glados/variants/cave/data.vbt b/src/mainboard/google/glados/variants/cave/data.vbt new file mode 100644 index 0000000000..02e1cd10f6 Binary files /dev/null and b/src/mainboard/google/glados/variants/cave/data.vbt differ diff --git a/src/mainboard/google/glados/variants/cave/devicetree.cb b/src/mainboard/google/glados/variants/cave/devicetree.cb new file mode 100644 index 0000000000..02667a457c --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/devicetree.cb @@ -0,0 +1,303 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 5 Domains + #+----------------+-------+-------+-------------+-------------+-------+ + #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | 0 | + #| IccMax | 4A | 24A | 24A | 24A | 24A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(4), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_RING]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + }" + + # Enable Root port 1 + register "PcieRpEnable[0]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[0]" = "1" + # RP 1 uses SRCCLKREQ1# + register "PcieRpClkReqNumber[0]" = "1" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board) + register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex) + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Type-A Port 1 + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A Port 2 + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board) + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex) + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A Port 2 + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, + [PchSerialIoIndexUart0] = PchSerialIoPci, + [PchSerialIoIndexUart1] = PchSerialIoDisabled, + [PchSerialIoIndexUart2] = PchSerialIoPci, + }" + + # I2C4 is 1.8V + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" + + # PL2 override 15W + register "tdp_pl2_override" = "15" + + register "tcc_offset" = "10" # TCC of 90C + + # Send an extra VR mailbox command for the supported MPS IMVP8 model + register "SendVrMbxCmd" = "1" + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_A7" + + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + device i2c 10 on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" # R389 + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0c" + register "sar_threshold[1]" = "0x1e" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "0" # VDDA + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on end + end + end # I2C #4 + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_DW0_16" + device pci 00.0 on end + end + end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on + chip drivers/generic/max98357a + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/google/glados/variants/cave/include/variant/acpi/dptf.asl b/src/mainboard/google/glados/variants/cave/include/variant/acpi/dptf.asl new file mode 100644 index 0000000000..33b25a41ec --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/include/variant/acpi/dptf.asl @@ -0,0 +1,102 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * Copyright (C) 2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 99 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "WiFi" +#define DPTF_TSR0_PASSIVE 50 +#define DPTF_TSR0_CRITICAL 80 +#define DPTF_TSR0_TABLET_PASSIVE 52 +#define DPTF_TSR0_TABLET_CRITICAL 80 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "PD" +#define DPTF_TSR1_PASSIVE 50 +#define DPTF_TSR1_CRITICAL 80 +#define DPTF_TSR1_TABLET_PASSIVE 52 +#define DPTF_TSR1_TABLET_CRITICAL 80 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "DRAM" +#define DPTF_TSR2_PASSIVE 50 +#define DPTF_TSR2_CRITICAL 80 +#define DPTF_TSR2_TABLET_PASSIVE 52 +#define DPTF_TSR2_TABLET_CRITICAL 80 + +#define DPTF_TSR3_SENSOR_ID 4 +#define DPTF_TSR3_SENSOR_NAME "Charger" +#define DPTF_TSR3_PASSIVE 68 +#define DPTF_TSR3_CRITICAL 85 +#define DPTF_TSR3_TABLET_PASSIVE 68 +#define DPTF_TSR3_TABLET_CRITICAL 85 + +/* Enable DPTF charger control */ +#define DPTF_ENABLE_CHARGER + +/* SKL-Y is Fanless design. */ +#undef DPTF_ENABLE_FAN_CONTROL + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x1338, "mA", 0 }, /* 4920mA (MAX) */ + Package () { 0, 0, 0, 0, 39, 0x9C0, "mA", 0 }, /* 2496mA */ + Package () { 0, 0, 0, 0, 28, 0x700, "mA", 0 }, /* 1792mA */ + Package () { 0, 0, 0, 0, 19, 0x4C0, "mA", 0 }, /* 1216mA */ + Package () { 0, 0, 0, 0, 13, 0x340, "mA", 0 }, /* 832mA */ + Package () { 0, 0, 0, 0, 10, 0x280, "mA", 0 }, /* 640mA */ + Package () { 0, 0, 0, 0, 6, 0x180, "mA", 0 }, /* 384mA */ + Package () { 0, 0, 0, 0, 2, 0x80, "mA", 0 }, /* 124mA */ +}) + +Name (DTRT, Package () { + /* CPU Throttle Effect on CPU */ + Package () { \_SB.PCI0.B0D4, \_SB.PCI0.B0D4, 100, 10, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 0 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR0, 100, 100, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 1 */ + Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 100, 50, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 2 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR2, 100, 100, 0, 0, 0, 0 }, + + /* Charger Effect on Temp Sensor 3 */ + Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR3, 100, 50, 0, 0, 0, 0 }, +}) + +Name (MPPC, Package () +{ + 0x2, /* Revision */ + Package () { /* Power Limit 1 */ + 0, /* PowerLimitIndex, 0 for Power Limit 1 */ + 1600, /* PowerLimitMinimum */ + 10000, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 200 /* StepSize */ + }, + Package () { /* Power Limit 2 */ + 1, /* PowerLimitIndex, 1 for Power Limit 2 */ + 8000, /* PowerLimitMinimum */ + 8000, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 1000 /* StepSize */ + } +}) diff --git a/src/mainboard/google/glados/variants/cave/include/variant/acpi/mainboard.asl b/src/mainboard/google/glados/variants/cave/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000000..e69de29bb2 diff --git a/src/mainboard/google/glados/variants/cave/include/variant/ec.h b/src/mainboard/google/glados/variants/cave/include/variant/ec.h new file mode 100644 index 0000000000..62bfec1d9f --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/include/variant/ec.h @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Enable EC backed ALS device in ACPI */ +#define EC_ENABLE_ALS_DEVICE + +/* Enable EC backed Keyboard Backlight in ACPI */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT + +/* EC ENABLE TABLET EVENT */ +#define EC_ENABLE_TABLET_EVENT diff --git a/src/mainboard/google/glados/variants/cave/include/variant/gpio.h b/src/mainboard/google/glados/variants/cave/include/variant/gpio.h new file mode 100644 index 0000000000..6674b0edba --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/include/variant/gpio.h @@ -0,0 +1,246 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include +#include + +/* MAX98357A SD_MODE */ +#define GPIO_SPEAKER_MAXIM_AMP_SDMODE GPP_E3 + +/* EC in RW */ +#define GPIO_EC_IN_RW GPP_C6 + +/* BIOS Flash Write Protect */ +#define GPIO_PCH_WP GPP_C23 + +/* Memory configuration board straps */ +#define GPIO_MEM_CONFIG_0 GPP_C12 +#define GPIO_MEM_CONFIG_1 GPP_C13 +#define GPIO_MEM_CONFIG_2 GPP_C14 +#define GPIO_MEM_CONFIG_3 GPP_C15 + +/* EC wake is LAN_WAKE# which is a special DeepSX wake pin */ +#define GPE_EC_WAKE GPE0_LAN_WAK + +/* GPP_B16 is WLAN_WAKE. GPP_B group is routed to DW0 in the GPE0 block */ +#define GPE_WLAN_WAKE GPE0_DW0_16 + +/* GPP_B5 is TOUCHPAD WAKE. GPP_B group is routed to DW0 in the GPE0 block */ +#define GPE_TOUCHPAD_WAKE GPE0_DW0_05 + +/* Input device interrupt configuration */ +#define TOUCHPAD_INT_L GPP_B3_IRQ +#define TOUCHSCREEN_INT_L GPP_E7_IRQ +#define MIC_INT_L GPP_F10_IRQ + +/* GPP_E16 is EC_SCI_L. GPP_E group is routed to DW2 in the GPE0 block */ +#define EC_SCI_GPI GPE0_DW2_16 +#define EC_SMI_GPI GPP_E15 + +/* Power rail control signals. */ +#define EN_PP3300_KEPLER GPP_C11 +#define EN_PP3300_DX_TOUCH GPP_C22 +#define EN_PP3300_DX_EMMC GPP_D5 +#define EN_PP1800_DX_EMMC GPP_D6 +#define EN_PP3300_DX_CAM GPP_D12 + +/* SD controller needs additional card detect GPIO to support RTD3 */ +#define GPIO_SD_CARD_DETECT GPP_A7 + +#ifndef __ACPI__ +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { +/* RCIN# */ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), +/* LAD0 */ PAD_CFG_NF(GPP_A1, 20K_PU, DEEP, NF1), +/* LAD1 */ PAD_CFG_NF(GPP_A2, 20K_PU, DEEP, NF1), +/* LAD2 */ PAD_CFG_NF(GPP_A3, 20K_PU, DEEP, NF1), +/* LAD3 */ PAD_CFG_NF(GPP_A4, 20K_PU, DEEP, NF1), +/* LFRAME# */ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), +/* SERIRQ */ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), +/* SD_CD_INT_L */ PAD_CFG_GPI_GPIO_DRIVER(GPP_A7, 20K_PU, DEEP), +/* CLKRUN# */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), +/* CLKOUT_LPC0 */ PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1), +/* CLKOUT_LPC1 */ PAD_CFG_NC(GPP_A10), +/* PME# */ PAD_CFG_NC(GPP_A11), +/* BM_BUSY# */ PAD_CFG_NC(GPP_A12), +/* SUSWARN# */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), +/* SUS_STAT# */ PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), +/* SUSACK# */ PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1), +/* SD_1P8_SEL */ PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1), +/* SD_PWR_EN# */ PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1), +/* ISH_GP0 */ PAD_CFG_NC(GPP_A18), +/* ISH_GP1 */ PAD_CFG_NC(GPP_A19), +/* ISH_GP2 */ PAD_CFG_NC(GPP_A20), +/* ISH_GP3 */ PAD_CFG_NC(GPP_A21), +/* ISH_GP4 */ PAD_CFG_NC(GPP_A22), +/* ISH_GP5 */ PAD_CFG_NC(GPP_A23), +/* CORE_VID0 */ PAD_CFG_NC(GPP_B0), +/* CORE_VID1 */ PAD_CFG_NC(GPP_B1), +/* VRALERT# */ PAD_CFG_NC(GPP_B2), +/* CPU_GP2 */ PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST), /* TRACKPAD */ +/* CPU_GP3 */ PAD_CFG_NC(GPP_B4), +/* SRCCLKREQ0# */ PAD_CFG_GPI_ACPI_SCI(GPP_B5, NONE, DEEP, YES), /* TRACKPAD WAKE */ +/* SRCCLKREQ1# */ PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), /* WLAN */ +/* SRCCLKREQ2# */ PAD_CFG_NC(GPP_B7), +/* SRCCLKREQ3# */ PAD_CFG_NC(GPP_B8), +/* SRCCLKREQ4# */ PAD_CFG_NC(GPP_B9), +/* SRCCLKREQ5# */ PAD_CFG_NC(GPP_B10), +/* EXT_PWR_GATE# */ PAD_CFG_NF(GPP_B11, NONE, DEEP, NF1), +/* SLP_S0# */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), +/* PLTRST# */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), +/* SPKR */ PAD_CFG_NC(GPP_B14), +/* GSPI0_CS# */ PAD_CFG_NC(GPP_B15), +/* GSPI0_CLK */ PAD_CFG_GPI_ACPI_SCI(GPP_B16, NONE, DEEP, YES), /* WLAN WAKE */ +/* GSPI0_MISO */ PAD_CFG_NC(GPP_B17), +/* GSPI0_MOSI */ PAD_CFG_NC(GPP_B18), +/* GSPI1_CS# */ PAD_CFG_NC(GPP_B19), +/* GSPI1_CLK */ PAD_CFG_NC(GPP_B20), +/* GSPI1_MISO */ PAD_CFG_NC(GPP_B21), +/* GSPI1_MOSI */ PAD_CFG_NC(GPP_B22), +/* SM1ALERT# */ PAD_CFG_GPO(GPP_B23, 0, DEEP), +/* SMBCLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), /* XDP */ +/* SMBDATA */ PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), /* XDP */ +/* SMBALERT# */ PAD_CFG_NC(GPP_C2), +/* SML0CLK */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C3, NONE, DEEP), +/* SML0DATA */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C4, NONE, DEEP), +/* SML0ALERT# */ PAD_CFG_GPO(GPP_C5, 0, DEEP), +/* SM1CLK */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C6, 20K_PU, DEEP), /* EC_IN_RW */ +/* SM1DATA */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C7, NONE, DEEP), +/* UART0_RXD */ PAD_CFG_NC(GPP_C8), +/* UART0_TXD */ PAD_CFG_NC(GPP_C9), +/* UART0_RTS# */ PAD_CFG_NC(GPP_C10), +/* UART0_CTS# */ PAD_CFG_NC(GPP_C11), +/* UART1_RXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP), /* MEM_CONFIG[0] */ +/* UART1_TXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C13, NONE, DEEP), /* MEM_CONFIG[1] */ +/* UART1_RTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C14, NONE, DEEP), /* MEM_CONFIG[2] */ +/* UART1_CTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C15, NONE, DEEP), /* MEM_CONFIG[3] */ +/* I2C0_SDA */ PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), /* TOUCHSCREEN */ +/* I2C0_SCL */ PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), /* TOUCHSCREEN */ +/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), /* TRACKPAD */ +/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), /* TRACKPAD */ +/* UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* SERVO */ +/* UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* SERVO */ +/* UART2_RTS# */ PAD_CFG_GPO(GPP_C22, 1, DEEP), /* EN_PP3300_DX_TOUCH */ +/* UART2_CTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP), /* PCH_WP */ +/* SPI1_CS# */ PAD_CFG_NC(GPP_D0), +/* SPI1_CLK */ PAD_CFG_NC(GPP_D1), +/* SPI1_MISO */ PAD_CFG_NC(GPP_D2), +/* SPI1_MOSI */ PAD_CFG_NC(GPP_D3), +/* FASHTRIG */ PAD_CFG_NC(GPP_D4), +/* ISH_I2C0_SDA */ PAD_CFG_GPO(GPP_D5, 1, DEEP), /* EN_PP3300_DX_EMMC */ +/* ISH_I2C0_SCL */ PAD_CFG_GPO(GPP_D6, 1, DEEP), /* EN_PP1800_DX_EMMC */ +/* ISH_I2C1_SDA */ PAD_CFG_NC(GPP_D7), +/* ISH_I2C1_SCL */ PAD_CFG_NC(GPP_D8), + PAD_CFG_NC(GPP_D9), + PAD_CFG_NC(GPP_D10), + PAD_CFG_NC(GPP_D11), + PAD_CFG_GPO(GPP_D12, 1, DEEP), /* EN_PP3300_DX_CAM */ +/* ISH_UART0_RXD */ PAD_CFG_NC(GPP_D13), +/* ISH_UART0_TXD */ PAD_CFG_NC(GPP_D14), +/* ISH_UART0_RTS# */ PAD_CFG_NC(GPP_D15), +/* ISH_UART0_CTS# */ PAD_CFG_NC(GPP_D16), +/* DMIC_CLK1 */ PAD_CFG_NC(GPP_D17), +/* DMIC_DATA1 */ PAD_CFG_NC(GPP_D18), +/* DMIC_CLK0 */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), +/* DMIC_DATA0 */ PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), +/* TS_SPI_IO2 */ PAD_CFG_NC(GPP_D21), +/* TS_SPI_IO3 */ PAD_CFG_NC(GPP_D22), +/* I2S_MCLK */ PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1), +/* SATAXPCI0 */ PAD_CFG_GPI_APIC(GPP_E0, NONE, PLTRST), /* TPM_PIRQ_L */ +/* SATAXPCIE1 */ PAD_CFG_NC(GPP_E1), +/* SATAXPCIE2 */ PAD_CFG_NC(GPP_E2), +/* CPU_GP0 */ PAD_CFG_GPI_GPIO_DRIVER(GPP_E3, NONE, DEEP), /* AUDIO_DB_ID */ +/* SATA_DEVSLP0 */ PAD_CFG_GPO(GPP_E4, 1, DEEP), /* TOUCH_RESET */ +/* SATA_DEVSLP1 */ PAD_CFG_NC(GPP_E5), +/* SATA_DEVSLP2 */ PAD_CFG_NC(GPP_E6), +/* CPU_GP1 */ PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST), /* TOUCHSCREEN */ +/* SATALED# */ PAD_CFG_NC(GPP_E8), +/* USB2_OCO# */ PAD_CFG_NC(GPP_E9), +/* USB2_OC1# */ PAD_CFG_NC(GPP_E10), +/* USB2_OC2# */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), +/* USB2_OC3# */ PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), +/* DDPB_HPD0 */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), +/* DDPC_HPD1 */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), +/* DDPD_HPD2 */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES), /* EC_SMI_L */ +/* DDPE_HPD3 */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, DEEP, YES), /* EC_SCI_L */ +/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), +/* DDPB_CTRLCLK */ PAD_CFG_NC(GPP_E18), +/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1), +/* DDPC_CTRLCLK */ PAD_CFG_NC(GPP_E20), +/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1), + PAD_CFG_NC(GPP_E22), + PAD_CFG_NC(GPP_E23), +/* + * The next 4 pads are for bit banging the amplifiers. They are connected + * together with i2s0 signals. For default behavior of i2s make these + * gpio inupts. + */ +/* I2S2_SCLK */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F0, NONE, DEEP), +/* I2S2_SFRM */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F1, NONE, DEEP), +/* I2S2_TXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F2, NONE, DEEP), +/* I2S2_RXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F3, NONE, DEEP), +/* I2C2_SDA */ PAD_CFG_NC(GPP_F4), +/* I2C2_SCL */ PAD_CFG_NC(GPP_F5), +/* I2C3_SDA */ PAD_CFG_NC(GPP_F6), +/* I2C3_SCL */ PAD_CFG_NC(GPP_F7), +/* I2C4_SDA */ PAD_CFG_NF(GPP_F8, NONE, DEEP, NF1), /* Amplifiers */ +/* I2C4_SCL */ PAD_CFG_NF(GPP_F9, NONE, DEEP, NF1), /* Amplifiers */ +/* I2C5_SDA */ PAD_CFG_GPI_APIC(GPP_F10, NONE, PLTRST), /* MIC_INT_L */ +/* I2C5_SCL */ PAD_CFG_NC(GPP_F11), +/* EMMC_CMD */ PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), +/* EMMC_DATA0 */ PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), +/* EMMC_DATA1 */ PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), +/* EMMC_DATA2 */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), +/* EMMC_DATA3 */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), +/* EMMC_DATA4 */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), +/* EMMC_DATA5 */ PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), +/* EMMC_DATA6 */ PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), +/* EMMC_DATA7 */ PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), +/* EMMC_RCLK */ PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), +/* EMMC_CLK */ PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), +/* BOOT_BEEP */ PAD_CFG_GPO(GPP_F23, 1, DEEP), +/* SD_CMD */ PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1), +/* SD_DATA0 */ PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1), +/* SD_DATA1 */ PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1), +/* SD_DATA2 */ PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1), +/* SD_DATA3 */ PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1), +/* SD_CD# */ PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1), +/* SD_CLK */ PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1), +/* SD_WP */ PAD_CFG_NF(GPP_G7, 20K_PD, DEEP, NF1), +/* BATLOW# */ PAD_CFG_NF(GPD0, NONE, DEEP, NF1), +/* ACPRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1), +/* LAN_WAKE# */ PAD_CFG_NF(GPD2, 20K_PU, DEEP, NF1), /* EC_PCH_WAKE_L */ +/* PWRBTN# */ PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1), +/* SLP_S3# */ PAD_CFG_NF(GPD4, 20K_PU, DEEP, NF1), +/* SLP_S4# */ PAD_CFG_NF(GPD5, 20K_PU, DEEP, NF1), +/* SLP_A# */ PAD_CFG_NF(GPD6, 20K_PU, DEEP, NF1), + PAD_CFG_NC(GPD7), +/* SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1), +/* SLP_WLAN# */ PAD_CFG_NC(GPD9), +/* SLP_S5# */ PAD_CFG_NF(GPD10, 20K_PU, DEEP, NF1), +/* LANPHYC */ PAD_CFG_NC(GPD11), +}; + +/* Early pad configuration in romstage. */ +static const struct pad_config early_gpio_table[] = { +/* UART2_CTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP), /* PCH_WP */ +}; + +#endif + +#endif diff --git a/src/mainboard/google/glados/variants/cave/variant.c b/src/mainboard/google/glados/variants/cave/variant.c new file mode 100644 index 0000000000..2ce0a9001c --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/variant.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + /* DQ byte map */ + const u8 dq_map[2][12] = { + { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, + 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 }, + { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, + 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } }; + /* DQS CPU<>DRAM map */ + const u8 dqs_map[2][8] = { + { 0, 1, 3, 2, 4, 5, 6, 7 }, + { 1, 0, 4, 5, 2, 3, 6, 7 } }; + + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 200, 81, 162 }; + + /* Rcomp target */ + const u16 RcompTarget[5] = { 100, 40, 40, 23, 40 }; + + memcpy(pei_data->dq_map, dq_map, sizeof(dq_map)); + memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map)); + memcpy(pei_data->RcompResistor, RcompResistor, + sizeof(RcompResistor)); + memcpy(pei_data->RcompTarget, RcompTarget, + sizeof(RcompTarget)); +} + +void mainboard_gpio_smi_sleep(void) +{ + int i; + + /* Power down the rails on any sleep type. */ + gpio_t active_high_signals[] = { + EN_PP3300_KEPLER, + EN_PP3300_DX_TOUCH, + EN_PP3300_DX_EMMC, + EN_PP1800_DX_EMMC, + EN_PP3300_DX_CAM, + }; + + for (i = 0; i < ARRAY_SIZE(active_high_signals); i++) + gpio_set(active_high_signals[i], 0); +} -- cgit v1.2.3