From e75148cd13e68338f7323c932f512a01e59ef6b7 Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Sat, 25 May 2024 17:49:11 +0000 Subject: mb/google/trulo: Mark unused USB ports as empty This patch marks unused USB ports (USB2.0/TCSS) empty to avoid prompting wrong dmesg as below. ``` usb usb2-port3: Cannot enable. Maybe the USB cable is bad? ``` Trulo variants to override the USB ports as per the target board design. TEST=Able to build google/trulo. Change-Id: I6240e66ed3d1a7198c1a526fdca2483910157235 Signed-off-by: Subrata Banik Reviewed-on: https://review.coreboot.org/c/coreboot/+/82651 Tested-by: build bot (Jenkins) Reviewed-by: Eric Lai --- .../brya/variants/baseboard/trulo/devicetree.cb | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/brya/variants/baseboard/trulo/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/trulo/devicetree.cb index 7f6a091999..3e77896fdd 100644 --- a/src/mainboard/google/brya/variants/baseboard/trulo/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/trulo/devicetree.cb @@ -6,6 +6,40 @@ chip soc/intel/alderlake # EC memory map range is 0x900-0x9ff register "gen3_dec" = "0x00fc0901" + register "usb2_ports[0]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 0 + register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 1 + register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 2 + register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 3 + register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 4 + register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 5 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 6 + register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 7 + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 8 + register "usb2_ports[9]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 9 + register "usb2_ports[10]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 10 + register "usb2_ports[11]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 11 + register "usb2_ports[12]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 12 + register "usb2_ports[13]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 13 + register "usb2_ports[14]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 14 + register "usb2_ports[15]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 15 + + register "usb3_ports[0]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 0 + register "usb3_ports[1]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 2 + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 3 + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 4 + register "usb3_ports[4]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 5 + register "usb3_ports[5]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 6 + register "usb3_ports[6]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 7 + register "usb3_ports[7]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 8 + register "usb3_ports[8]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 9 + register "usb3_ports[9]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 10 + + register "tcss_ports[0]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 0 + register "tcss_ports[1]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 1 + register "tcss_ports[2]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 2 + register "tcss_ports[3]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 3 + + device domain 0 on end end -- cgit v1.2.3