From e3f5f2155a75687ab50d53c49977748f4cecdb2b Mon Sep 17 00:00:00 2001 From: Roy Mingi Park Date: Sat, 13 Apr 2019 15:16:50 -0700 Subject: mb/google/sarien: Configure both GPP_H12 and GPP_H13 for SSD on Arcada Currently, Arcada only supports D3hot during S0iX and there is leakage power around 5~10mW depending on SSD vendors. To support D3cold for SSD during S0iX, one MOSFET will be added on DVT2 and two GPIOs are required to be configured. GPP_H13 is to control SSD_SCP_PWR_EN(power enable) and GPP_H12 is to control SSD reset. BUG=b:130741066 TEST=Measure SSD power during S0iX from Arcada(DVT2) Change-Id: I868590e9e85d5df07930a3681884e3fc3a5c4d50 Signed-off-by: Roy Mingi Park Reviewed-on: https://review.coreboot.org/c/coreboot/+/32361 Reviewed-by: Duncan Laurie Tested-by: build bot (Jenkins) --- src/mainboard/google/sarien/variants/arcada/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/sarien/variants/arcada/gpio.c b/src/mainboard/google/sarien/variants/arcada/gpio.c index b66e1dda43..2a0ead82a9 100644 --- a/src/mainboard/google/sarien/variants/arcada/gpio.c +++ b/src/mainboard/google/sarien/variants/arcada/gpio.c @@ -211,8 +211,8 @@ static const struct pad_config gpio_table[] = { /* I2C4_SCL */ PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), /* I2C_SCL_H1 */ /* I2C5_SDA */ PAD_NC(GPP_H10, NONE), /* ISH_I2C2_SDA */ /* I2C5_SCL */ PAD_NC(GPP_H11, NONE), /* ISH_I2C2_SCL */ -/* M2_SKT2_CFG0 */ PAD_NC(GPP_H12, NONE), -/* M2_SKT2_CFG1 */ PAD_NC(GPP_H13, NONE), +/* M2_SKT2_CFG0 */ PAD_CFG_GPO(GPP_H12, 1, DEEP), /* D3 cold RST */ +/* M2_SKT2_CFG1 */ PAD_CFG_GPO(GPP_H13, 1, DEEP), /* M.2 SSD D3 cold */ /* M2_SKT2_CFG2 */ PAD_NC(GPP_H14, NONE), /* M2_SKT2_CFG3 */ PAD_CFG_GPO(GPP_H15, 1, DEEP), /* BT_RADIO_DIS# */ /* DDPF_CTRLCLK */ PAD_NC(GPP_H16, NONE), -- cgit v1.2.3