From e3be9c05d503739b14fb1b0a303a3ea4f8d5e032 Mon Sep 17 00:00:00 2001 From: Shelley Chen Date: Wed, 30 May 2018 20:15:18 -0700 Subject: mb/google/poppy/variants/nami: Add delay to enable_gpio during Elan power on During measurement of signals during Elan touchscreen power on, saw that the enable_gpio delay was not sufficient as there is a +1.5 ms delay during power on. Adding more delay to take this into account. BUG=b:78311818 BRANCH=None TEST=probe power on signals to ensure meet timing requirements Change-Id: Id661a202188a97aef97514ebecd0be6fc022d21e Signed-off-by: Shelley Chen Reviewed-on: https://review.coreboot.org/26725 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh --- src/mainboard/google/poppy/variants/nami/devicetree.cb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb index fdbe6ffc75..4d912d3863 100644 --- a/src/mainboard/google/poppy/variants/nami/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb @@ -307,7 +307,7 @@ chip soc/intel/skylake register "reset_delay_ms" = "20" register "reset_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B4)" - register "enable_delay_ms" = "1" + register "enable_delay_ms" = "5" register "enable_off_delay_ms" = "100" register "has_power_resource" = "1" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C3)" -- cgit v1.2.3