From c0d7d6b564e979b29fab50203b53fdb4722920c9 Mon Sep 17 00:00:00 2001 From: Tim Wawrzynczak Date: Tue, 8 Feb 2022 13:03:25 -0700 Subject: mb/google/brya: Enable GPIO PM dynamically based on cr50 FW version cr50 firmware revisions starting at 0.5.5 and later are able to extend their IRQ pulses to be a minimum of 100us long. This change will enable cr50 long interrupt pulses when it detects the feature is supported by the detected firmware version. If the capability was detected, then GPIO PM will be enabled for the device, otherwise it will be disabled. BUG=b:202246591 TEST=boot brya0, check console logs for the correct message, and verify the GPIO PM registers. Signed-off-by: Tim Wawrzynczak Change-Id: Iaf333dc0f177e17cd03b36ec7e487fc33bde2b93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61722 Reviewed-by: Subrata Banik Tested-by: build bot (Jenkins) --- src/mainboard/google/brya/Kconfig | 1 + src/mainboard/google/brya/mainboard.c | 31 ++++++++++++++++++++-- .../brya/variants/baseboard/brask/devicetree.cb | 10 ------- .../brya/variants/baseboard/brya/devicetree.cb | 10 ------- 4 files changed, 30 insertions(+), 22 deletions(-) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig index 00e8bc9c18..6690a905ff 100644 --- a/src/mainboard/google/brya/Kconfig +++ b/src/mainboard/google/brya/Kconfig @@ -2,6 +2,7 @@ config BOARD_GOOGLE_BRYA_COMMON def_bool n select ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTOR select BOARD_ROMSIZE_KB_32768 + select CR50_USE_LONG_INTERRUPT_PULSES select DRIVERS_GENERIC_ALC1015 select DRIVERS_GENERIC_GPIO_KEYS select DRIVERS_GENERIC_MAX98357A diff --git a/src/mainboard/google/brya/mainboard.c b/src/mainboard/google/brya/mainboard.c index 488eb889cc..42536bb793 100644 --- a/src/mainboard/google/brya/mainboard.c +++ b/src/mainboard/google/brya/mainboard.c @@ -1,12 +1,16 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ +#include #include #include +#include +#include #include #include #include -#include -#include +#include +#include +#include WEAK_DEV_PTR(rp6_wwan); @@ -28,6 +32,29 @@ static void mainboard_smbios_strings(struct device *dev, struct smbios_type11 *t void mainboard_update_soc_chip_config(struct soc_intel_alderlake_config *config) { + int ret; + + ret = tlcl_lib_init(); + if (ret != VB2_SUCCESS) { + printk(BIOS_ERR, "tlcl_lib_init() failed: 0x%x\n", ret); + return; + } + + if (cr50_is_long_interrupt_pulse_enabled()) { + printk(BIOS_INFO, "Enabling GPIO PM b/c CR50 has long IRQ pulse support\n"); + config->gpio_override_pm = 0; + } else { + printk(BIOS_INFO, "Disabling GPIO PM b/c CR50 does not have long IRQ pulse " + "support\n"); + config->gpio_override_pm = 1; + config->gpio_pm[COMM_0] = 0; + config->gpio_pm[COMM_1] = 0; + config->gpio_pm[COMM_2] = 0; + config->gpio_pm[COMM_3] = 0; + config->gpio_pm[COMM_4] = 0; + config->gpio_pm[COMM_5] = 0; + } + variant_update_soc_chip_config(config); } diff --git a/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb index 98dd3a5fec..9eb8bb2adb 100644 --- a/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb @@ -76,16 +76,6 @@ chip soc/intel/alderlake # FIVR RFI Spread Spectrum 1.5% register "FivrSpreadSpectrum" = "FIVR_SS_1_5" - # This disables autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses. - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | diff --git a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb index 6ac796af1f..0558307f1c 100644 --- a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb @@ -72,16 +72,6 @@ chip soc/intel/alderlake # FIVR RFI Spread Spectrum 1.5% register "FivrSpreadSpectrum" = "FIVR_SS_1_5" - # This disables autonomous GPIO power management, otherwise old cr50 FW - # only supports short pulses and they can be missed by the PCH. - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | -- cgit v1.2.3