From 954111695cb7e27647ed9c150cac2f77d39c1e09 Mon Sep 17 00:00:00 2001 From: Tim Wawrzynczak Date: Wed, 18 Sep 2019 11:22:56 -0600 Subject: mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configuration A closer read of the EDS indicates that when GPIO Driver mode is selected, GPIO input event updates are limited to GPI_STS only. GPI_GPE_STS updates are therefore masked, and we don't want to enable this behavior. It masks the GPE and does not allow us to see this GPE as a wake source, obscuring the reason that the system woke up. Also switch the IRQ from level-triggered to edge-triggered, otherwise the system will auto-wake from any sleep state when the pen is ejected from the garage. BUG=b:132981083 BRANCH=none TEST=Wake up system from S0ix using pen eject, verify that mosys eventlog shows GPE#8 as the S0ix wakeup source. Wake up system from S3 via pen eject, and verify that the wakeup source shows as GPE#8. Change-Id: If017e12e23134f5cfed7cbb6047cc9badd9bf7e8 Signed-off-by: Tim Wawrzynczak Reviewed-on: https://review.coreboot.org/c/coreboot/+/35459 Reviewed-by: Furquan Shaikh Reviewed-by: Paul Fagerburg Tested-by: build bot (Jenkins) --- src/mainboard/google/hatch/variants/baseboard/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/hatch/variants/baseboard/gpio.c b/src/mainboard/google/hatch/variants/baseboard/gpio.c index fcb1a614cc..240bb5d23b 100644 --- a/src/mainboard/google/hatch/variants/baseboard/gpio.c +++ b/src/mainboard/google/hatch/variants/baseboard/gpio.c @@ -31,7 +31,7 @@ static const struct pad_config gpio_table[] = { /* A7 : PP3300_SOC_A */ PAD_NC(GPP_A7, NONE), /* A8 : PEN_GARAGE_DET_L (wake) */ - PAD_CFG_GPI_GPIO_DRIVER_SCI(GPP_A8, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_SCI(GPP_A8, NONE, DEEP, EDGE_SINGLE, NONE), /* A9 : ESPI_CLK */ /* A10 : FPMCU_PCH_BOOT1 */ PAD_CFG_GPO(GPP_A10, 0, DEEP), -- cgit v1.2.3