From 24ec79c39b00ffebf536ce7fb0306fc582440e44 Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Thu, 16 Jul 2020 13:40:28 -0700 Subject: mb/google/zork: Switch to using newly added i2s_machine_dev driver This change switches zork devices to use the newly added i2s_machine_dev driver in devicetree rather than passing dmic_select_gpio in SoC config. BUG=b:157708581 Change-Id: I76c633694cbfb454c081ab2a4af4765bfbbae16b Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/c/coreboot/+/43543 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/mainboard/google/zork/Kconfig | 1 + .../zork/variants/baseboard/devicetree_dalboz.cb | 27 ++++++++------ .../zork/variants/baseboard/devicetree_trembyle.cb | 27 ++++++++------ .../zork/variants/baseboard/ramstage_common.c | 41 ++++++++++++++++++---- 4 files changed, 68 insertions(+), 28 deletions(-) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/zork/Kconfig b/src/mainboard/google/zork/Kconfig index 9740d632ac..75b3e01345 100644 --- a/src/mainboard/google/zork/Kconfig +++ b/src/mainboard/google/zork/Kconfig @@ -14,6 +14,7 @@ config BOARD_SPECIFIC_OPTIONS select SOC_AMD_PICASSO select VGA_BIOS select BOARD_ROMSIZE_KB_16384 + select DRIVERS_AMD_I2S_MACHINE_DEV select DISABLE_SPI_FLASH_ROM_SHARING select DRIVERS_GENERIC_GPIO_KEYS select DRIVERS_I2C_GENERIC diff --git a/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb b/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb index 4a605b0665..e355b5b14a 100644 --- a/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb +++ b/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb @@ -17,16 +17,6 @@ chip soc/amd/picasso register "acp_i2s_wake_enable" = "1" register "acpi_pme_enable" = "1" - # DMIC select GPIO for ACP machine device - # This GPIO is used to select DMIC0 or DMIC1 by the kernel driver. It does not - # really have a polarity since low and high control the selection of DMIC and - # hence does not have an active polarity. - # Kernel driver does not use the polarity field and instead treats the GPIO - # selection as follows: - # Set low (0) = Select DMIC0 - # Set high (1) = Select DMIC1 - register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)" - # Start : OPN Performance Configuration # (Configuratin that is common for all variants) # For the below fields, 0 indicates use SOC default @@ -273,7 +263,22 @@ chip soc/amd/picasso end end end - device pci 0.5 on end # Audio + device pci 0.5 on + chip drivers/amd/i2s_machine_dev + register "hid" = ""AMDI5682"" + # DMIC select GPIO for ACP machine device + # This GPIO is used to select DMIC0 or DMIC1 by the + # kernel driver. It does not really have a polarity + # since low and high control the selection of DMIC and + # hence does not have an active polarity. + # Kernel driver does not use the polarity field and + # instead treats the GPIO selection as follows: + # Set low (0) = Select DMIC0 + # Set high (1) = Select DMIC1 + register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)" + device generic 0.0 on end + end + end # Audio device pci 0.6 on end # HDA device pci 0.7 on end # non-Sensor Fusion Hub device end diff --git a/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb b/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb index 883556287c..283e7a07a4 100644 --- a/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb +++ b/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb @@ -17,16 +17,6 @@ chip soc/amd/picasso register "acp_i2s_wake_enable" = "1" register "acpi_pme_enable" = "1" - # DMIC select GPIO for ACP machine device - # This GPIO is used to select DMIC0 or DMIC1 by the kernel driver. It does not - # really have a polarity since low and high control the selection of DMIC and - # hence does not have an active polarity. - # Kernel driver does not use the polarity field and instead treats the GPIO - # selection as follows: - # Set low (0) = Select DMIC0 - # Set high (1) = Select DMIC1 - register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)" - # Start : OPN Performance Configuration # (Configuratin that is common for all variants) # For the below fields, 0 indicates use SOC default @@ -301,7 +291,22 @@ chip soc/amd/picasso end end end - device pci 0.5 on end # Audio + device pci 0.5 on + chip drivers/amd/i2s_machine_dev + register "hid" = ""AMDI5682"" + # DMIC select GPIO for ACP machine device + # This GPIO is used to select DMIC0 or DMIC1 by the + # kernel driver. It does not really have a polarity + # since low and high control the selection of DMIC and + # hence does not have an active polarity. + # Kernel driver does not use the polarity field and + # instead treats the GPIO selection as follows: + # Set low (0) = Select DMIC0 + # Set high (1) = Select DMIC1 + register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)" + device generic 0.0 on end + end + end # Audio device pci 0.6 on end # HDA device pci 0.7 on end # non-Sensor Fusion Hub device end diff --git a/src/mainboard/google/zork/variants/baseboard/ramstage_common.c b/src/mainboard/google/zork/variants/baseboard/ramstage_common.c index f7f11b88ea..511d60d0b8 100644 --- a/src/mainboard/google/zork/variants/baseboard/ramstage_common.c +++ b/src/mainboard/google/zork/variants/baseboard/ramstage_common.c @@ -2,19 +2,48 @@ #include #include +#include #include #include +#include + +extern struct chip_operations drivers_amd_i2s_machine_dev_ops; void variant_audio_update(void) { - struct soc_amd_picasso_config *cfg = config_of_soc(); - struct acpi_gpio *gpio = &cfg->dmic_select_gpio; + const struct device *gpp_a_dev; + const struct device *acp_dev; + struct device *machine_dev = NULL; if (variant_uses_v3_schematics()) return; - if (CONFIG(BOARD_GOOGLE_BASEBOARD_TREMBYLE)) - gpio->pins[0] = GPIO_13; - else - gpio->pins[0] = GPIO_6; + gpp_a_dev = pcidev_path_on_root(PCIE_GPP_A_DEVFN); + if (gpp_a_dev == NULL) + return; + + acp_dev = pcidev_path_behind(gpp_a_dev->link_list, AUDIO_DEVFN); + if (acp_dev == NULL) + return; + + while ((machine_dev = dev_bus_each_child(acp_dev->link_list, machine_dev)) != NULL) { + struct drivers_amd_i2s_machine_dev_config *cfg; + struct acpi_gpio *gpio; + + if (machine_dev->chip_info == NULL) + continue; + + if (machine_dev->chip_ops != &drivers_amd_i2s_machine_dev_ops) + continue; + + cfg = machine_dev->chip_info; + gpio = &cfg->dmic_select_gpio; + + if (CONFIG(BOARD_GOOGLE_BASEBOARD_TREMBYLE)) + gpio->pins[0] = GPIO_13; + else + gpio->pins[0] = GPIO_6; + + break; + } } -- cgit v1.2.3