From 1fdb76945a9d06bbff37dee9da69e13a86c933f4 Mon Sep 17 00:00:00 2001 From: Caveh Jalali Date: Fri, 15 Jun 2018 20:51:14 -0700 Subject: mb/google/poppy/variants/atlas: enable camera power and release reset This is a temporary hack to test camera presence before we have full camera support implemented. Basically, we can now probe the camera over i2c to verify that it's connected and the camera LED turns on. BUG=b:80106316 BRANCH=none TEST=camera LED comes on and camera can be probed over i2c. Change-Id: Ibaabf6c6f6a1dabaddd2fc47c820e090ca5984a5 Signed-off-by: Caveh Jalali Reviewed-on: https://review.coreboot.org/27128 Reviewed-by: Furquan Shaikh Tested-by: build bot (Jenkins) --- src/mainboard/google/poppy/variants/atlas/gpio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/poppy/variants/atlas/gpio.c b/src/mainboard/google/poppy/variants/atlas/gpio.c index 3a7b722648..b37426559d 100644 --- a/src/mainboard/google/poppy/variants/atlas/gpio.c +++ b/src/mainboard/google/poppy/variants/atlas/gpio.c @@ -177,7 +177,7 @@ static const struct pad_config gpio_table[] = { /* D7 : ISH_I2C1_SDA ==> SPKR_IRQ_L */ PAD_CFG_GPI_APIC(GPP_D7, NONE, PLTRST), /* D8 : ISH_I2C1_SCL ==> EN_CAMERA_PWR */ - PAD_CFG_GPO(GPP_D8, 0, DEEP), + PAD_CFG_GPO(GPP_D8, 1, DEEP), /* D9 : ISH_SPI_CS# ==> ISH_SPI_CS_L */ PAD_CFG_NF_1V8(GPP_D9, NONE, DEEP, NF1), /* D10 : ISH_SPI_CLK ==> ISH_SPI_CLK */ @@ -195,9 +195,9 @@ static const struct pad_config gpio_table[] = { /* D16 : ISH_UART0_CTS# ==> NC */ PAD_CFG_NC(GPP_D16), /* D17 : DMIC_CLK1 ==> PCH_CAMERA_RESET */ - PAD_CFG_GPO(GPP_D17, 0, DEEP), + PAD_CFG_GPO(GPP_D17, 1, DEEP), /* D18 : DMIC_DATA1 ==> PCH_CAMERA_CLOCK_ENABLE */ - PAD_CFG_GPO(GPP_D18, 0, DEEP), + PAD_CFG_GPO(GPP_D18, 1, DEEP), /* D19 : DMIC_CLK0 ==> PCH_DMIC_CLK_OUT */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), /* D20 : DMIC_DATA0 ==> PCH_DMIC_DATA_IN */ -- cgit v1.2.3