From deb80ea8071d38a15fa9c06be0e069be55672b25 Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Maiya Date: Tue, 11 Aug 2020 22:21:31 -0700 Subject: mb/google/zork: Switch to using FW_CONFIG instead of SKU_ID Currently sku_id is used to enable/disable eMMC as boot media on Dalboz. This patch will check eMMC bit in firmware configuration table to enable/disable eMMC. On Dalboz Proto and EVT devices with eMMC, there was an issue found after SMT. This patch checks for board_version instead of SKU_ID to configure eMMC in HS200. Configure HDMI based on daughterboard_id in FW_CONFIG. BRANCH=none BUG=b:152817444 TEST=Check eMMC is enabled or disabled based on the eMMC bit in FW_CONFIG. Signed-off-by: Bhanu Prakash Maiya Change-Id: Ifa2a49a754d85fb6269f788c970bd9da58af1dad Reviewed-on: https://review.coreboot.org/c/coreboot/+/44421 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin Reviewed-by: Furquan Shaikh --- .../google/zork/variants/dalboz/variant.c | 41 ++++++++++------------ 1 file changed, 18 insertions(+), 23 deletions(-) (limited to 'src/mainboard/google/zork') diff --git a/src/mainboard/google/zork/variants/dalboz/variant.c b/src/mainboard/google/zork/variants/dalboz/variant.c index de4338e446..5138782e5c 100644 --- a/src/mainboard/google/zork/variants/dalboz/variant.c +++ b/src/mainboard/google/zork/variants/dalboz/variant.c @@ -10,6 +10,8 @@ #include #define EC_PNP_ID 0x0c09 +#define DALBOZ_DB_USBC 0x0 +#define DALBOZ_DB_HDMI 0x1 /* Look for an EC device of type PNP with id 0x0c09 */ static bool match_ec_dev(DEVTREE_CONST struct device *dev) @@ -104,30 +106,22 @@ static void update_audio_configuration(void) cfg->remote_bus = 5; } -static int sku_has_emmc(void) -{ - uint32_t board_sku = sku_id(); - - /* Factory flow requires all OS boot media to be enabled. */ - if (boot_is_factory_unprovisioned()) - return 1; - - /* FIXME: This needs to be fw_config controlled. */ - /* Enable emmc0 for unknown skus. Only sku3/0xC really has it. */ - if (board_sku == 0x5A80000C || board_sku == 0x5A800003 || board_sku == CROS_SKU_UNKNOWN) - return 1; - - return 0; -} - void variant_devtree_update(void) { + uint32_t board_version; struct soc_amd_picasso_config *cfg; cfg = config_of_soc(); - if (sku_has_emmc()) { - if ((sku_id() == 0x5A800003) || (sku_id() == 0x5A80000C)) { + /* + * If CBI board version cannot be read, assume this is an older revision + * of hardware. + */ + if (google_chromeec_cbi_get_board_version(&board_version) != 0) + board_version = 1; + + if (variant_has_emmc() || boot_is_factory_unprovisioned()) { + if (board_version <= 2) { /* * rev0 and rev1 boards have issues with HS400 * @@ -196,14 +190,15 @@ void variant_get_dxio_ddi_descriptors(const fsp_dxio_descriptor **dxio_descs, const fsp_ddi_descriptor **ddi_descs, size_t *ddi_num) { - uint32_t board_sku = sku_id(); + uint32_t daughterboard_id = variant_get_daughterboard_id(); *dxio_descs = baseboard_get_dxio_descriptors(dxio_num); - /* SKU 1, A, and D DB have HDMI, as well as unknown */ - /* FIXME: this needs to be fw_config controlled. */ - if ((board_sku == 0x5A80000A) || (board_sku == 0x5A80000D) || (board_sku == 0x5A800001) - || (board_sku == CROS_SKU_UNKNOWN)) { + /* + * Get daughterboard id from FW_CONFIG and configure descriptors accordingly. + * For unprovisioned boards use DB_HDMI as default. + */ + if ((daughterboard_id == DALBOZ_DB_HDMI) || boot_is_factory_unprovisioned()) { *ddi_descs = &hdmi_ddi_descriptors[0]; *ddi_num = ARRAY_SIZE(hdmi_ddi_descriptors); } else { -- cgit v1.2.3