From 4e86131462786f3a9898d90cfa1602b1e157bb5c Mon Sep 17 00:00:00 2001 From: Rob Barnes Date: Thu, 1 Oct 2020 15:16:39 -0600 Subject: mb/google/zork/dirinboz: Increase eMMC initial clock frequency This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot dirinboz, run integrity test, b:169940185 BRANCH=zork Signed-off-by: Rob Barnes Change-Id: I6bac8284b67070ff2c5838257f4ae2ead0e69c22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45934 Reviewed-by: Martin Roth Reviewed-by: Marshall Dawson Reviewed-by: Sam McNally Tested-by: build bot (Jenkins) --- src/mainboard/google/zork/variants/dirinboz/overridetree.cb | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'src/mainboard/google/zork/variants') diff --git a/src/mainboard/google/zork/variants/dirinboz/overridetree.cb b/src/mainboard/google/zork/variants/dirinboz/overridetree.cb index 905bc886e9..a11fa5e4c7 100644 --- a/src/mainboard/google/zork/variants/dirinboz/overridetree.cb +++ b/src/mainboard/google/zork/variants/dirinboz/overridetree.cb @@ -36,6 +36,12 @@ chip soc/amd/picasso .early_init = true, }" + register "emmc_config" = "{ + .timing = SD_EMMC_EMMC_HS400, + .sdr104_hs400_driver_strength = SD_EMMC_DRIVE_STRENGTH_A, + .init_khz_preset = 400, + }" + # See AMD 55570-B1 Table 13: PCI Device ID Assignments. device domain 0 on subsystemid 0x1022 0x1510 inherit -- cgit v1.2.3