From ead253a366cbad63d00ffdc914ff9f7f6f534e42 Mon Sep 17 00:00:00 2001 From: Raul E Rangel Date: Wed, 16 Dec 2020 10:13:35 -0700 Subject: mb/google/zork/mainboard: Remove unused pirq_data This table was wrong. It's also produced by the SoC code now. BUG=b:170595019 TEST=Verify PCI IRQ: log messages Signed-off-by: Raul E Rangel Change-Id: I008b6896064672f9d45a8e12f6cfc62c0cc41536 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48666 Tested-by: build bot (Jenkins) Reviewed-by: Nikolai Vyssotski Reviewed-by: Felix Held --- src/mainboard/google/zork/mainboard.c | 27 --------------------------- 1 file changed, 27 deletions(-) (limited to 'src/mainboard/google/zork/mainboard.c') diff --git a/src/mainboard/google/zork/mainboard.c b/src/mainboard/google/zork/mainboard.c index 824a87dab4..94a64bd078 100644 --- a/src/mainboard/google/zork/mainboard.c +++ b/src/mainboard/google/zork/mainboard.c @@ -50,30 +50,6 @@ static uint8_t fch_apic_routing[0x80]; _Static_assert(sizeof(fch_pic_routing) == sizeof(fch_apic_routing), "PIC and APIC FCH interrupt tables must be the same size"); -/* - * This table doesn't actually perform any routing. It only populates the - * PCI_INTERRUPT_LINE register on the PCI device with the PIC value specified - * in fch_apic_routing. The linux kernel only looks at this field as a backup - * if ACPI routing fails to describe the PCI routing correctly. The linux kernel - * also uses the APIC by default, so the value coded into the registers will be - * wrong. - * - * This table is also confusing because PCI Interrupt routing happens at the - * device/slot level, not the function level. - */ -static const struct pirq_struct mainboard_pirq_data[] = { - { PCIE_GPP_0_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, - { PCIE_GPP_1_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, // Bridge 1 - Wifi - { PCIE_GPP_2_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, // Bridge 2 - SD - { PCIE_GPP_3_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, - { PCIE_GPP_4_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, - { PCIE_GPP_5_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, - { PCIE_GPP_6_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, // Bridge 6 - NVME - { PCIE_GPP_A_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, - { PCIE_GPP_B_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, - { SMBUS_DEVFN, { PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, -}; - /* * This controls the device -> IRQ routing. * @@ -133,9 +109,6 @@ static void init_tables(void) static void pirq_setup(void) { init_tables(); - - pirq_data_ptr = mainboard_pirq_data; - pirq_data_size = ARRAY_SIZE(mainboard_pirq_data); intr_data_ptr = fch_apic_routing; picr_data_ptr = fch_pic_routing; } -- cgit v1.2.3