From b7ecf6d83047e70ed5846ac35833a04983318b9c Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Wed, 13 Mar 2013 17:13:32 -0700 Subject: Add support for "Stout" Chromebook We're happy to announce coreboot support for the "Stout" Chromebook, a.k.a Lenovo X131e Chromebook. Change-Id: I9b995f8d0dd48e41c788b7c3d35b4fac5840e425 Signed-off-by: Stefan Reinauer Reviewed-on: http://review.coreboot.org/2636 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/mainboard/google/stout/devicetree.cb | 108 +++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 src/mainboard/google/stout/devicetree.cb (limited to 'src/mainboard/google/stout/devicetree.cb') diff --git a/src/mainboard/google/stout/devicetree.cb b/src/mainboard/google/stout/devicetree.cb new file mode 100644 index 0000000000..c58a8d69e9 --- /dev/null +++ b/src/mainboard/google/stout/devicetree.cb @@ -0,0 +1,108 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "5" # T4: 400ms + register "gpu_panel_power_up_delay" = "400" # T1+T2: 40ms + register "gpu_panel_power_down_delay" = "150" # T3: 15ms + register "gpu_panel_power_backlight_on_delay" = "2100" # T5: 210ms + register "gpu_panel_power_backlight_off_delay" = "2100" # TD: 210ms + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" + + register "tcc_offset" = "5" # TCC of 95C + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + subsystemid 0x1ae0 0xc000 inherit + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "alt_gp_smi_en" = "0x0002" + register "gpi1_routing" = "1" + register "gpi6_routing" = "2" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x3" + + # Enable EC Port 0x68/0x6C + register "gen1_dec" = "0x00040069" + + # EC range is 0x800-0x9ff + register "gen2_dec" = "0x00fc0901" + + # EC range is 0x1610-0x161F + register "gen3_dec" = "0x0001C1611" + + # Enable zero-based linear PCIe root port functions + register "pcie_port_coalesce" = "1" + + device pci 14.0 on end # USB 3.0 Controller + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 (AUO4, BlueTooth) + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 (WLAN) + device pci 1c.2 on end # PCIe Port #3 (Card Reader) + register "pcie_aspm_f2" = "0x3" + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 on end # PCIe Port #6 (LAN) + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 (Camera, WLAN, WWAN) + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip ec/quanta/it8518 + # 60h/64h KBC + device pnp ff.1 on # dummy address + end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 (HDD/SSD) + device pci 1f.3 on end # SMBus Controller + device pci 1f.5 off end # SATA Controller 2 (MSATA) + device pci 1f.6 off end # Thermal + end + end +end -- cgit v1.2.3