From ffe0bb7cd805190afae225dcfeb0a11dedccbb8f Mon Sep 17 00:00:00 2001 From: Tom Warren Date: Mon, 24 Nov 2014 10:00:11 -0700 Subject: google/rush_ryu: Add speaker amp config for AD4567 on P0/P1 A couple of regs need to be poked to allow audio output from this part on Ryu P0/P1. It will be replaced by two non-configurable amps on P3. BUG=none BRANCH=none TEST=Build/flashed on Ryu P1, dumped AD4567 (I2C6 dev 0x34) regs and confirmed settings. Change-Id: Ie602b056fb1488546ab233f8f81cfacb96624ebb Signed-off-by: Patrick Georgi Original-Commit-Id: 75dabe378b561e939381e2ef5113a2b28bfcedf8 Original-Change-Id: I8999843646927dbd07a179ede973ba5f1eb97167 Original-Signed-off-by: Tom Warren Original-Reviewed-on: https://chromium-review.googlesource.com/231384 Original-Reviewed-by: Aaron Durbin Reviewed-on: http://review.coreboot.org/9532 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/mainboard/google/rush_ryu/mainboard.c | 34 +++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'src/mainboard/google/rush_ryu/mainboard.c') diff --git a/src/mainboard/google/rush_ryu/mainboard.c b/src/mainboard/google/rush_ryu/mainboard.c index 9673aa5410..2955958d3d 100644 --- a/src/mainboard/google/rush_ryu/mainboard.c +++ b/src/mainboard/google/rush_ryu/mainboard.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -208,6 +209,37 @@ static void setup_audio(void) clock_enable_audio(); } +#define AD4567_DEV 0x34 +#define PWR_CTL 0 +#define DAC_CTL 2 +#define SPWDN (1 << 0) +#define DAC_MUTE (1 << 6) +#define DAC_FS (0x7 << 0) +#define SR_32K_48KHZ 0x2 + +static void enable_ad4567_spkr_amp(void) +{ + uint8_t reg_byte; + + if (board_id() >= BOARD_ID_PROTO_3) + return; + /* + * I2C6, device 0x34 is an AD4567 speaker amp on P0/P1. + * It needs to have a couple of regs tweaked to turn it on + * so it can provide audio output to the mono speaker on P0/P1. + */ + i2c_readb(I2C6_BUS, AD4567_DEV, PWR_CTL, ®_byte); + reg_byte &= ~SPWDN; // power up amp + i2c_writeb(I2C6_BUS, AD4567_DEV, PWR_CTL, reg_byte); + + /* The next 2 settings are defaults, but set them anyway */ + i2c_readb(I2C6_BUS, AD4567_DEV, DAC_CTL, ®_byte); + reg_byte &= ~DAC_MUTE; // unmute DAC (default) + reg_byte &= ~DAC_FS; // mask sample rate bits + reg_byte |= SR_32K_48KHZ; // set 32K-48KHz sample rate (default) + i2c_writeb(I2C6_BUS, AD4567_DEV, DAC_CTL, reg_byte); +} + static void mainboard_init(device_t dev) { soc_configure_funits(funits, ARRAY_SIZE(funits)); @@ -217,6 +249,8 @@ static void mainboard_init(device_t dev) i2c_init(I2C6_BUS); setup_audio(); + /* Temp hack for P1 board: Enable speaker amp (powerup, etc.) */ + enable_ad4567_spkr_amp(); elog_init(); elog_add_boot_reason(); -- cgit v1.2.3