From 8110223989b34675c949465663c7ebfd5eb10155 Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Mon, 20 Mar 2017 10:53:57 -0700 Subject: mainboard/google/poppy: Use sideband IRQ for SD Card Detect Since SD card controller is expected to enter D3hot by runtime power management if there is no card inserted, we need to use a sideband IRQ pin which is not under the control of the controller. Thus, configure GPP_A7 as the sideband IRQ pin and pass it to OS as the card detect pin. BUG=b:35586693 BRANCH=None TEST=Verified on a reworked poppy board that card detect works fine. Change-Id: I4512f5d7829583e27c9750463396eaffbc5702b4 Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/18926 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin Reviewed-by: Paul Menzel --- src/mainboard/google/poppy/devicetree.cb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/mainboard/google/poppy/devicetree.cb') diff --git a/src/mainboard/google/poppy/devicetree.cb b/src/mainboard/google/poppy/devicetree.cb index fc639677fc..7bf28d0b31 100644 --- a/src/mainboard/google/poppy/devicetree.cb +++ b/src/mainboard/google/poppy/devicetree.cb @@ -177,7 +177,7 @@ chip soc/intel/skylake register "tcc_offset" = "10" # TCC of 90C # Use default SD card detect GPIO configuration - register "sdcard_cd_gpio_default" = "GPP_G7" + register "sdcard_cd_gpio_default" = "GPP_A7" device cpu_cluster 0 on device lapic 0 on end -- cgit v1.2.3