From 447badd1cfbf70a26f3e6fb0b84d8166dc732bc4 Mon Sep 17 00:00:00 2001 From: Hung-Te Lin Date: Tue, 9 Jul 2019 16:38:36 +0800 Subject: board/kukui: Remove ADC tolerance from boardid The tolerance of ADC is +-10mV, but the resistors may also introduce 1% variation, and causing the final measured voltage to vary around 5%. By the advisory from hardware team, checking the tolerance seems not really solving or helping anything so we should just ignore that and try to find best matched ID (this also aligns to what Gru did). BUG=b:136990271 TEST=Booted on Krane and no longer seeing ADC out of range BRANCH=None Change-Id: Ie02ca5aaafbcfa8f411d973ad0266eee385d6878 Signed-off-by: Hung-Te Lin Reviewed-on: https://review.coreboot.org/c/coreboot/+/34161 Reviewed-by: Paul Menzel Reviewed-by: Julius Werner Reviewed-by: Yu-Ping Wu Reviewed-by: You-Cheng Syu Tested-by: build bot (Jenkins) --- src/mainboard/google/kukui/boardid.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'src/mainboard/google/kukui') diff --git a/src/mainboard/google/kukui/boardid.c b/src/mainboard/google/kukui/boardid.c index 71f051f312..ad066666cb 100644 --- a/src/mainboard/google/kukui/boardid.c +++ b/src/mainboard/google/kukui/boardid.c @@ -82,15 +82,7 @@ static uint32_t get_adc_index(unsigned int channel) for (id = 0; id < ADC_LEVELS - 1; id++) if (value < (voltages[id] + voltages[id + 1]) / 2) break; - - /* The last level is NC and may be larger than standard tolerance. */ - const int tolerance = 10000; /* 10,000 uV */ - if (id < ADC_LEVELS - 1 && ABS(value - voltages[id]) > tolerance) { - printk(BIOS_ERR, "ADC channel %u value out of range: %d\n", - channel, value); - assert(0); - } - + printk(BIOS_DEBUG, "ADC[%d]: Raw value=%d ID=%d\n", channel, value, id); return id; } -- cgit v1.2.3