From 2832c4125bb74cf09414df23f54e0b87ab8bce7b Mon Sep 17 00:00:00 2001 From: Vadim Bendebury Date: Wed, 11 May 2016 15:03:44 +0800 Subject: gru: set correct gpio for SD card detect The only outlier at this time is Kevin rev 0, treat it specially, the rest of the targets use the same GPIO. BRANCH=none BUG=none TEST=gru still boots off SD card just fine Change-Id: Ic603093a990d27166b16175db3303f155b4775aa Signed-off-by: Martin Roth Original-Commit-Id: 5788c5add1d1f803e7b22fb53215b6003ac04d03 Original-Change-Id: Ic5183f08dd1119f9588f243bd9e9c080d84687f9 Original-Signed-off-by: Vadim Bendebury Original-Reviewed-on: https://chromium-review.googlesource.com/344151 Original-Reviewed-by: Patrick Georgi Reviewed-on: https://review.coreboot.org/14851 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury --- src/mainboard/google/gru/mainboard.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'src/mainboard/google/gru') diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c index e91f289759..b7a197ee8b 100644 --- a/src/mainboard/google/gru/mainboard.c +++ b/src/mainboard/google/gru/mainboard.c @@ -24,19 +24,13 @@ static void configure_sdmmc(void) { gpio_output(GPIO(4, D, 5), 1); /* SDMMC_PWR_EN */ gpio_output(GPIO(2, A, 2), 1); /* SDMMC_SDIO_PWR_EN */ - /* - * SDMMC_DET_L is different on different board revisions. - * Ideally this and other deviations should come from a table - * which could be looked up by board revision. - */ - switch (board_id()) { - case 0: /* This is for Kevin proto 1. */ + + /* SDMMC_DET_L is different on Kevin board revision 0. */ + if (IS_ENABLED(CONFIG_BOARD_GOOGLE_KEVIN) && (board_id() == 0)) gpio_input(GPIO(4, D, 2)); - break; - default: + else gpio_input(GPIO(4, D, 0)); - break; - } + gpio_output(GPIO(2, D, 4), 0); /* Keep the max voltage */ write32(&rk3399_grf->iomux_sdmmc, IOMUX_SDMMC); -- cgit v1.2.3