From 95ea799019fdb7c0baee70bd07196910dbc0cd95 Mon Sep 17 00:00:00 2001 From: Karthikeyan Ramasubramanian Date: Fri, 7 Feb 2020 17:37:17 -0700 Subject: mb/google/dedede: Add console UART configuration Enable UART Port 2 as console UART and configure the concerned GPIOs. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian Change-Id: I30a64a3c96226ce3244d55919b6d65fbf0a096e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38776 Reviewed-by: Justin TerAvest Tested-by: build bot (Jenkins) --- src/mainboard/google/dedede/variants/baseboard/devicetree.cb | 4 ++-- src/mainboard/google/dedede/variants/baseboard/gpio.c | 9 +++++++++ 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'src/mainboard/google/dedede/variants') diff --git a/src/mainboard/google/dedede/variants/baseboard/devicetree.cb b/src/mainboard/google/dedede/variants/baseboard/devicetree.cb index e98b686608..4b2a3c5b13 100644 --- a/src/mainboard/google/dedede/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/dedede/variants/baseboard/devicetree.cb @@ -49,7 +49,7 @@ chip soc/intel/tigerlake register "SerialIoUartMode" = "{ [PchSerialIoIndexUART0] = PchSerialIoDisabled, [PchSerialIoIndexUART1] = PchSerialIoDisabled, - [PchSerialIoIndexUART2] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoSkipInit, }" # Intel Common SoC Config @@ -91,7 +91,7 @@ chip soc/intel/tigerlake device pci 17.0 off end # SATA device pci 19.0 off end # I2C 4 device pci 19.1 off end # I2C 5 - device pci 19.2 off end # UART 2 + device pci 19.2 on end # UART 2 device pci 1a.0 off end # eMMC device pci 1c.0 off end # PCI Express Root Port 1 device pci 1c.1 off end # PCI Express Root Port 2 diff --git a/src/mainboard/google/dedede/variants/baseboard/gpio.c b/src/mainboard/google/dedede/variants/baseboard/gpio.c index b9d77bf585..c334f1107a 100644 --- a/src/mainboard/google/dedede/variants/baseboard/gpio.c +++ b/src/mainboard/google/dedede/variants/baseboard/gpio.c @@ -32,6 +32,15 @@ static const struct pad_config gpio_table[] = { PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), /* B18 : H1_SLAVE_SPI_MOSI_R */ PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + + /* C20 : UART_DBG_TX_AP_RX */ + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), + /* C21 : UART_AP_TX_DBG_RX */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), + /* C22 : UART2_RTS_N */ + PAD_NC(GPP_C22, DN_20K), + /* C23 : UART2_CTS_N */ + PAD_NC(GPP_C23, DN_20K), }; /* Early pad configuration in bootblock */ -- cgit v1.2.3