From fa03a9f059cab6bdec8235fee95d68329ed79315 Mon Sep 17 00:00:00 2001 From: Bora Guvendik Date: Tue, 23 Aug 2022 10:32:37 -0700 Subject: mb/google/brya/var/skolas4es: Configure _DSC for camera devices Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:194979741 BRANCH=firmware-brya-14505.B TEST=Build and boot skolas to OS. Verify entries in SSDT. Signed-off-by: Bora Guvendik Change-Id: I3c32dd71ab454227b15913bda7f542230e5568db Reviewed-on: https://review.coreboot.org/c/coreboot/+/67021 Tested-by: build bot (Jenkins) Reviewed-by: Tim Wawrzynczak --- .../google/brya/variants/skolas4es/overridetree.cb | 34 ++++++++++++++++++++-- 1 file changed, 31 insertions(+), 3 deletions(-) (limited to 'src/mainboard/google/brya') diff --git a/src/mainboard/google/brya/variants/skolas4es/overridetree.cb b/src/mainboard/google/brya/variants/skolas4es/overridetree.cb index 9d2b0a2109..bf72f208e9 100644 --- a/src/mainboard/google/brya/variants/skolas4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/skolas4es/overridetree.cb @@ -354,6 +354,7 @@ chip soc/intel/alderlake register "link_freq[0]" = "360 * MHz" # 360 MHz register "link_freq[1]" = "180 * MHz" # 180 MHz register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "has_power_resource" = "1" #Controls @@ -386,10 +387,23 @@ chip soc/intel/alderlake register "acpi_name" = ""VCM0"" register "chip_name" = ""DW9768 VCM"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" - - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "vcm_compat" = ""dongwoon,dw9768"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 0C on end end chip drivers/intel/mipi_camera @@ -398,7 +412,6 @@ chip soc/intel/alderlake register "chip_name" = ""AT24 EEPROM"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "nvm_compat" = ""atmel,24c1024"" register "nvm_size" = "0x2800" @@ -406,6 +419,21 @@ chip soc/intel/alderlake register "nvm_readonly" = "0x01" register "nvm_width" = "0x10" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 58 on end end end #I2C0 -- cgit v1.2.3