From 6cb787b19af7a52fb417c5111f09b0e4e11beda7 Mon Sep 17 00:00:00 2001 From: Eric Lai Date: Fri, 6 May 2022 15:26:13 +0800 Subject: mb/google/nissa/var/nivviks: Use interrupt with lock for pen detect GPIO With GPIO_DRIVER_LOCK kernel driver can't change to IRQ. Thus, we need to set it as INT in coreboot to make the IRQ work. BUG=b:223476974 TEST=evtest work as expected. Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100 Input device name: "PRP0001:00" Supported events: Event type 0 (EV_SYN) Event type 5 (EV_SW) Event code 15 (SW_PEN_INSERTED) state 0 Properties: Testing ... (interrupt to exit) Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1 Event: -------------- SYN_REPORT ------------ Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0 Signed-off-by: Eric Lai Change-Id: I5f9fdfb2622b4b955da216119e74c6f7d5795d36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64091 Tested-by: build bot (Jenkins) Reviewed-by: Kangheui Won Reviewed-by: Reka Norman --- src/mainboard/google/brya/variants/baseboard/nissa/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/mainboard/google/brya') diff --git a/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c b/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c index ba3c8c5006..53ec244b8a 100644 --- a/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c +++ b/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c @@ -234,7 +234,7 @@ static const struct pad_config gpio_table[] = { /* F12 : GSXDOUT ==> WWAN_RST_L */ PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG), /* F13 : GSXSLOAD ==> SOC_PEN_DETECT_R_ODL */ - PAD_CFG_GPI_GPIO_DRIVER_LOCK(GPP_F13, NONE, LOCK_CONFIG), + PAD_CFG_GPI_INT_LOCK(GPP_F13, NONE, EDGE_BOTH, LOCK_CONFIG), /* F14 : GSXDIN ==> TCHPAD_INT_ODL */ PAD_CFG_GPI_IRQ_WAKE_LOCK(GPP_F14, NONE, LEVEL, INVERT, LOCK_CONFIG), /* F15 : GSXSRESET# ==> SOC_PEN_DETECT_ODL */ -- cgit v1.2.3