From bbba62614a6323e9df8a56c1ecbc29fbf51e04cc Mon Sep 17 00:00:00 2001 From: Daniel Peng Date: Mon, 28 Oct 2024 16:20:56 +0800 Subject: mb/google/nissa/var/glassway: Add touch screen ILIT2901 support 1. Extend 1 bit [34] for the TOUCHSCREEN_SOURCE. SSFC range for TOUCHSCREEN_SOURCE is bit[32:34]. 2. Touchscreen panel: MUTTO A153728S1Y, and set TOUCHSCREEN_ILIT2901 to value "4" 3. Datasheet: #153728S1V1.0 SPEC_20240923.pdf BUG=b:375986645 BRANCH=firmware-nissa-15217.B TEST=1. emerge-nissa coreboot chromeos-bootimage 2. Confirm command evtest and touchscreen function is workable. Change-Id: I6e13c948edca5a894e1a00a1954f0f88c4a079cf Signed-off-by: Daniel Peng Reviewed-on: https://review.coreboot.org/c/coreboot/+/84894 Reviewed-by: Eric Lai Reviewed-by: Jayvik Desai Reviewed-by: Paul Menzel Reviewed-by: Subrata Banik Tested-by: build bot (Jenkins) --- .../google/brya/variants/glassway/overridetree.cb | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'src/mainboard/google/brya/variants') diff --git a/src/mainboard/google/brya/variants/glassway/overridetree.cb b/src/mainboard/google/brya/variants/glassway/overridetree.cb index 3e2e2f1c52..85c08db1e5 100644 --- a/src/mainboard/google/brya/variants/glassway/overridetree.cb +++ b/src/mainboard/google/brya/variants/glassway/overridetree.cb @@ -31,11 +31,12 @@ fw_config option WFC_ABSENT 0 option WFC_PRESENT 1 end - field TOUCHSCREEN_SOURCE 32 33 + field TOUCHSCREEN_SOURCE 32 34 option TOUCHSCREEN_UNPROVISIONED 0 option TOUCHSCREEN_ELAN0001 1 option TOUCHSCREEN_GTCH7503 2 option TOUCHSCREEN_ELAN9004 3 + option TOUCHSCREEN_ILIT2901 4 end end @@ -394,6 +395,22 @@ chip soc/intel/alderlake probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ELAN9004 end end + chip drivers/i2c/hid + register "generic.hid" = ""ILIT2901"" + register "generic.desc" = ""ILI Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.detect" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "100" + register "generic.reset_off_delay_ms" = "2" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "6" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 41 on + probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ILIT2901 + end + end chip drivers/generic/gpio_keys register "name" = ""PENH"" register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)" -- cgit v1.2.3