From 45e11aa0a573aba1e4d8ae8dcd2cc87a8ca87dab Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Sun, 18 Dec 2016 11:59:58 -0600 Subject: Add/Combine Broadwell Chromebooks using variant board scheme Combine existing boards google/auron_paine and google/samus with new ChromeOS devices auron_yuna, gandof and lulu, using their common reference board (auron) as a base. Chromium sources used: firmware-yuna-6301.59.B 6ed8b9d [CHERRY-PICK: broadwell: Update to...] firmware-gandof-6301.155.B 666f34f [gandof: modify power limiting for...] firmware-lulu-6301.136.B 8811714 [lulu: update RAMID table] Additionally, some minor cleanup/changes were made: - I2C devices set to use level (vs edge) interrupt triggering - HDA verb entries use simplified macro entry format - correct FADT table header version - remove unused ACPI device entries / .asl file(s) - clean up ACPI code (e.g., trackpad on Lulu) - adjust _CID for trackpad on Lulu in order to not load non-functional Windows driver (does not affect Linux) - remove unused header includes (multiple/various) - correct I2C addresses used for SMBIOS device entries - correct misc typos etc The existing auron_paine samus boards are removed. Variant setup modeled after google/slippy Change-Id: I53436878d141715eb18b8ea5043d71e6e8728fe8 Signed-off-by: Matt DeVillier Reviewed-on: https://review.coreboot.org/17917 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- .../google/auron/variants/lulu/devicetree.cb | 110 ++++++++++++++++ .../lulu/include/variant/acpi/mainboard.asl | 138 ++++++++++++++++++++ .../auron/variants/lulu/include/variant/gpio.h | 121 ++++++++++++++++++ .../auron/variants/lulu/include/variant/hda_verb.h | 112 +++++++++++++++++ .../auron/variants/lulu/include/variant/onboard.h | 35 ++++++ .../auron/variants/lulu/include/variant/spd.h | 41 ++++++ .../auron/variants/lulu/include/variant/thermal.h | 35 ++++++ .../google/auron/variants/lulu/pei_data.c | 63 ++++++++++ .../google/auron/variants/lulu/spd/Makefile.inc | 51 ++++++++ .../google/auron/variants/lulu/spd/empty.spd.hex | 16 +++ .../spd/hynix_2GiB_dimm_H5TC4G63AFR-PBA.spd.hex | 32 +++++ .../spd/hynix_4GiB_dimm_H5TC8G63CMR-PBA.spd.hex | 33 +++++ .../spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex | 32 +++++ .../micron_4GiB_dimm_MT41K512M16TNA-125.spd.hex | 33 +++++ .../spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex | 17 +++ .../spd/samsung_2GiB_dimm_K4B4G1646Q-HYK0.spd.hex | 17 +++ .../spd/samsung_4GiB_dimm_K4B8G1646Q-MYK0.spd.hex | 17 +++ src/mainboard/google/auron/variants/lulu/spd/spd.c | 139 +++++++++++++++++++++ src/mainboard/google/auron/variants/lulu/variant.c | 48 +++++++ 19 files changed, 1090 insertions(+) create mode 100644 src/mainboard/google/auron/variants/lulu/devicetree.cb create mode 100644 src/mainboard/google/auron/variants/lulu/include/variant/acpi/mainboard.asl create mode 100644 src/mainboard/google/auron/variants/lulu/include/variant/gpio.h create mode 100644 src/mainboard/google/auron/variants/lulu/include/variant/hda_verb.h create mode 100644 src/mainboard/google/auron/variants/lulu/include/variant/onboard.h create mode 100644 src/mainboard/google/auron/variants/lulu/include/variant/spd.h create mode 100644 src/mainboard/google/auron/variants/lulu/include/variant/thermal.h create mode 100644 src/mainboard/google/auron/variants/lulu/pei_data.c create mode 100644 src/mainboard/google/auron/variants/lulu/spd/Makefile.inc create mode 100644 src/mainboard/google/auron/variants/lulu/spd/empty.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/hynix_2GiB_dimm_H5TC4G63AFR-PBA.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/hynix_4GiB_dimm_H5TC8G63CMR-PBA.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/micron_4GiB_dimm_MT41K512M16TNA-125.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646Q-HYK0.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/samsung_4GiB_dimm_K4B8G1646Q-MYK0.spd.hex create mode 100644 src/mainboard/google/auron/variants/lulu/spd/spd.c create mode 100644 src/mainboard/google/auron/variants/lulu/variant.c (limited to 'src/mainboard/google/auron/variants/lulu') diff --git a/src/mainboard/google/auron/variants/lulu/devicetree.cb b/src/mainboard/google/auron/variants/lulu/devicetree.cb new file mode 100644 index 0000000000..9f086a6392 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/devicetree.cb @@ -0,0 +1,110 @@ +chip soc/intel/broadwell + + # Enable eDP Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Disable DisplayPort C Hotplug + register "gpu_dp_c_hotplug" = "0x00" + + # Enable HDMI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Set backlight PWM values for eDP + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "70" # 7ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI is GPIO34 + register "alt_gp_smi_en" = "0x0004" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + register "sata_port_map" = "0x1" + register "sata_devslp_disable" = "1" + + register "sio_acpi_mode" = "1" + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + # Force enable ASPM for PCIe Port1 + register "pcie_port_force_aspm" = "0x01" + + # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013c0000" + + register "s0ix_enable" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio + device pci 13.0 off end # Smart Sound Audio DSP + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 off end # SDIO + device pci 19.0 off end # GbE + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip drivers/pc80/tpm + # Rising edge interrupt + register "irq_polarity" = "2" + device pnp 0c31.0 on + irq 0x70 = 10 + end + end + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller + device pci 1f.3 off end # SMBus + device pci 1f.6 on end # Thermal + end +end diff --git a/src/mainboard/google/auron/variants/lulu/include/variant/acpi/mainboard.asl b/src/mainboard/google/auron/variants/lulu/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000000..1f91456d77 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/include/variant/acpi/mainboard.asl @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope (\_SB.PCI0.I2C0) +{ + Device (STPA) + { + Name (_HID, "SYNA0000") + Name (_CID, "ACPI0C50") + Name (_DDN, "Synaptics Touchpad") + Name (_UID, 1) + Name (ISTP, 1) /* Touchpad */ + + Method(_CRS, 0x0, Serialized) + { + Name (RBUF, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TRACKPAD_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0", // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + BOARD_TRACKPAD_IRQ + } + }) + Return(RBUF) + } + + Method(_DSM, 0x4, NotSerialized) + { + If (LEqual(Arg0, ToUUID("3CDFF6F7-4267-4555-AD05-B30A3D8938DE"))) /* I2C-HID UUID */ + { + If (LEqual(Arg2, Zero)) /* DSM Function */ + { + /* Function 0: Query function, return based on revision */ + If (LEqual(Arg1, One)) /* Arg1 DSM Revision */ + { + /* Revision 1: Function 0 supported */ + Return(Buffer(One) { 0x03 }) + } + } ElseIf (LEqual(Arg2, One)) /* Function 1 : HID Function */ + { + Return(0x0020) /* HID Descriptor Address */ + } + } + + Return(Buffer(One) { 0x00 }) /* Not supported */ + } + + Method (_STA) + { + If (LEqual (\S1EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TRACKPAD_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GPIO.GWAK (Local0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + } +} +Scope (\_SB.PCI0.I2C1) +{ + Device (ETSA) + { + Name (_HID, "ELAN0001") + Name (_DDN, "Elan Touchscreen") + Name (_UID, 6) + Name (ISTP, 0) /* Touchscreen */ + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TOUCHSCREEN_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C1", // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + BOARD_TOUCHSCREEN_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S2EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + Name (_PRW, Package() { BOARD_TOUCHSCREEN_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TOUCHSCREEN_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GPIO.GWAK (Local0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + } +} diff --git a/src/mainboard/google/auron/variants/lulu/include/variant/gpio.h b/src/mainboard/google/auron/variants/lulu/include/variant/gpio.h new file mode 100644 index 0000000000..726dcc755e --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/include/variant/gpio.h @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Sage Electronic Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef LULU_GPIO_H +#define LULU_GPIO_H + +#include + +static const struct gpio_config mainboard_gpio_config[] = { + PCH_GPIO_UNUSED, /* 0: UNUSED */ + PCH_GPIO_UNUSED, /* 1: UNUSED */ + PCH_GPIO_UNUSED, /* 2: UNUSED */ + PCH_GPIO_UNUSED, /* 3: UNUSED */ + PCH_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */ + PCH_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */ + PCH_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */ + PCH_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */ + PCH_GPIO_INPUT, /* 8: RAM_ID4 */ + PCH_GPIO_INPUT, /* 9: RAM_ID1 */ + PCH_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */ + PCH_GPIO_UNUSED, /* 11: UNUSED */ + PCH_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */ + PCH_GPIO_INPUT, /* 13: RAM_ID0 */ + PCH_GPIO_INPUT, /* 14: EC_IN_RW */ + PCH_GPIO_UNUSED, /* 15: UNUSED (STRAP) */ + PCH_GPIO_UNUSED, /* 16: UNUSED */ + PCH_GPIO_UNUSED, /* 17: UNUSED */ + PCH_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */ + PCH_GPIO_UNUSED, /* 19: UNUSED */ + PCH_GPIO_UNUSED, /* 20: UNUSED */ + PCH_GPIO_UNUSED, /* 21: UNUSED */ + PCH_GPIO_UNUSED, /* 22: UNUSED */ + PCH_GPIO_UNUSED, /* 23: UNUSED */ + PCH_GPIO_UNUSED, /* 24: UNUSED */ + PCH_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */ + PCH_GPIO_UNUSED, /* 26: UNUSED */ + PCH_GPIO_UNUSED, /* 27: UNUSED */ + PCH_GPIO_UNUSED, /* 28: UNUSED */ + PCH_GPIO_UNUSED, /* 29: UNUSED */ + PCH_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */ + PCH_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */ + PCH_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */ + PCH_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */ + PCH_GPIO_ACPI_SMI, /* 34: EC_SMI_L */ + PCH_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */ + PCH_GPIO_ACPI_SCI, /* 36: EC_SCI_L */ + PCH_GPIO_UNUSED, /* 37: UNUSED */ + PCH_GPIO_UNUSED, /* 38: UNUSED */ + PCH_GPIO_UNUSED, /* 39: UNUSED */ + PCH_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */ + PCH_GPIO_UNUSED, /* 41: UNUSED */ + PCH_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */ + PCH_GPIO_UNUSED, /* 43: UNUSED */ + PCH_GPIO_OUT_HIGH, /* 44: PP3300_SSD_EN */ + PCH_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */ + PCH_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */ + PCH_GPIO_INPUT, /* 47: RAM_ID2 */ + PCH_GPIO_UNUSED, /* 48: UNUSED */ + PCH_GPIO_UNUSED, /* 49: UNUSED */ + PCH_GPIO_UNUSED, /* 50: UNUSED */ + PCH_GPIO_UNUSED, /* 51: UNUSED */ + PCH_GPIO_UNUSED, /* 52: UNUSED */ + PCH_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */ + PCH_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */ + PCH_GPIO_UNUSED, /* 55: UNUSED */ + PCH_GPIO_UNUSED, /* 56: UNUSED */ + PCH_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */ + PCH_GPIO_INPUT, /* 58: PCH_SPI_WP_D */ + PCH_GPIO_UNUSED, /* 59: UNUSED */ + PCH_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */ + PCH_GPIO_UNUSED, /* 61: UNUSED */ + PCH_GPIO_UNUSED, /* 62: UNUSED */ + PCH_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */ + PCH_GPIO_UNUSED, /* 64: UNUSED */ + PCH_GPIO_UNUSED, /* 65: UNUSED */ + PCH_GPIO_UNUSED, /* 66: UNUSED (STRAP) */ + PCH_GPIO_UNUSED, /* 67: UNUSED */ + PCH_GPIO_UNUSED, /* 68: UNUSED */ + PCH_GPIO_UNUSED, /* 69: UNUSED */ + PCH_GPIO_UNUSED, /* 70: UNUSED */ + PCH_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */ + PCH_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */ + PCH_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */ + PCH_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */ + PCH_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */ + PCH_GPIO_UNUSED, /* 76: UNUSED */ + PCH_GPIO_UNUSED, /* 77: UNUSED */ + PCH_GPIO_UNUSED, /* 78: UNUSED */ + PCH_GPIO_UNUSED, /* 79: UNUSED */ + PCH_GPIO_UNUSED, /* 80: UNUSED */ + PCH_GPIO_NATIVE, /* 81: NATIVE: SPKR */ + PCH_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */ + PCH_GPIO_UNUSED, /* 83: UNUSED */ + PCH_GPIO_UNUSED, /* 84: UNUSED */ + PCH_GPIO_UNUSED, /* 85: UNUSED */ + PCH_GPIO_UNUSED, /* 86: UNUSED (STRAP) */ + PCH_GPIO_UNUSED, /* 87: UNUSED */ + PCH_GPIO_UNUSED, /* 88: UNUSED */ + PCH_GPIO_UNUSED, /* 89: UNUSED */ + PCH_GPIO_UNUSED, /* 90: UNUSED */ + PCH_GPIO_UNUSED, /* 91: UNUSED */ + PCH_GPIO_UNUSED, /* 92: UNUSED */ + PCH_GPIO_UNUSED, /* 93: UNUSED */ + PCH_GPIO_UNUSED, /* 94: UNUSED */ + PCH_GPIO_END +}; + +#endif diff --git a/src/mainboard/google/auron/variants/lulu/include/variant/hda_verb.h b/src/mainboard/google/auron/variants/lulu/include/variant/hda_verb.h new file mode 100644 index 0000000000..a214a50eef --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/include/variant/hda_verb.h @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283 + 0x10ec0283, // Subsystem ID + 0x0000000e, // Number of jacks (NID entries) + + 0x0017ff00, // Function Reset + 0x0017ff00, // Double Function Reset + 0x000F0000, // Pad - get vendor id + 0x000F0002, // Pad - get revision id + + /* Bits 31:28 - Codec Address */ + /* Bits 27:20 - NID */ + /* Bits 19:8 - Verb ID */ + /* Bits 7:0 - Payload */ + + /* NID 0x01, HDA Codec Subsystem ID Verb Table */ + AZALIA_SUBVENDOR(0x0, 0x11790670), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x12) DMIC - Internal MIC */ + // group 3, cap 0 + // no connector, no jack detect + // mic in, digital + // fixed function, internal + AZALIA_PIN_CFG(0x0, 0x12, 0x90a60130), + + /* Pin Complex (NID 0x14) SPKR-OUT - Internal Speakers */ + // group 1, cap 0 + // no connector, no jack detect + // speaker out, analog + // fixed function, internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + + /* Pin Complex (NID 0x17) MONO Out - Disabled */ + AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0), + + /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */ + AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0), + + /* Pin Complex (NID 0x19) MIC2 - 3.5mm Jack */ + // group2, cap 0 + // black, jack detect + // Mic in, 3.5mm Jack + // connector, External left panel + AZALIA_PIN_CFG(0x0, 0x19, 0x03a11020), + + /* Pin Complex (NID 0x1A) LINE1 - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1A, 0x411111f0), + + /* Pin Complex (NID 0x1B) LINE2 - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1B, 0x411111f0), + + /* Pin Complex (NID 0x1D) PCBeep */ + // eapd low on ex-amp, laptop, custom enable + // mute spkr on hpout + // pcbeep en able, checksum + // no physical, Internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d), + + /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled*/ + AZALIA_PIN_CFG(0x0, 0x1E, 0x411111f0), + + /* Pin Complex (NID 0x21) HP-OUT - 3.5mm Jack*/ + // group2, cap 1 + // black, jack detect + // HPOut, 3.5mm Jack + // connector, left panel + AZALIA_PIN_CFG(0x0, 0x21, 0x03211021), + + /* Undocumented settings from Realtek (needed for beep_gen) */ + /* Widget node 0x20 */ + 0x02050010, + 0x02040c20, + 0x0205001b, + 0x0204081b, + + /* Tuned jack detection */ + 0x02050043, + 0x0204A614, + 0x02050047, + 0x02049470, +}; + +const u32 pc_beep_verbs[] = { + 0x00170500, /* power up everything (codec, dac, adc, mixers) */ + 0x01470740, /* enable speaker out */ + 0x01470c02, /* set speaker EAPD pin */ + 0x0143b01f, /* unmute speaker */ + 0x00c37100, /* unmute mixer nid 0xc input 1 */ + 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/google/auron/variants/lulu/include/variant/onboard.h b/src/mainboard/google/auron/variants/lulu/include/variant/onboard.h new file mode 100644 index 0000000000..0adc5890eb --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/include/variant/onboard.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ 37 /* PIRQV */ +#define BOARD_TRACKPAD_WAKE_GPIO 12 /* GPIO12 */ +#define BOARD_TRACKPAD_I2C_BUS 1 /* I2C0 */ +#define BOARD_TRACKPAD_I2C_ADDR 0x2C + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ 38 /* PIRQW */ +#define BOARD_TOUCHSCREEN_WAKE_GPIO 25 /* GPIO25 */ +#define BOARD_TOUCHSCREEN_I2C_BUS 2 /* I2C1 */ +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x10 + +#define BOARD_WLAN_WAKE_GPIO 10 /* GPIO10 */ +#define BOARD_PP3300_CODEC_GPIO 45 /* GPIO45 */ +#define BOARD_WLAN_DISABLE_GPIO 46 /* GPIO46 */ + +#endif diff --git a/src/mainboard/google/auron/variants/lulu/include/variant/spd.h b/src/mainboard/google/auron/variants/lulu/include/variant/spd.h new file mode 100644 index 0000000000..a7df6f425c --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/include/variant/spd.h @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Sage Electronic Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_SPD_H +#define MAINBOARD_SPD_H + +#define SPD_LEN 256 + +#define SPD_DRAM_TYPE 2 +#define SPD_DRAM_DDR3 0x0b +#define SPD_DRAM_LPDDR3 0xf1 +#define SPD_DENSITY_BANKS 4 +#define SPD_ADDRESSING 5 +#define SPD_ORGANIZATION 7 +#define SPD_BUS_DEV_WIDTH 8 +#define SPD_PART_OFF 128 +#define SPD_PART_LEN 18 + +/* Lulu board memory configuration GPIOs */ +#define SPD_GPIO_BIT0 13 +#define SPD_GPIO_BIT1 9 +#define SPD_GPIO_BIT2 47 +#define SPD_GPIO_BIT3 8 + +struct pei_data; +void mainboard_fill_spd_data(struct pei_data *pei_data); + +#endif diff --git a/src/mainboard/google/auron/variants/lulu/include/variant/thermal.h b/src/mainboard/google/auron/variants/lulu/include/variant/thermal.h new file mode 100644 index 0000000000..0b66c0b58f --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/include/variant/thermal.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef THERMAL_H +#define THERMAL_H + +/* Control TDP Settings */ +#define CTL_TDP_SENSOR_ID 0 /* PECI */ +#define CTL_TDP_POWER_LIMIT 12 /* 12W */ +#define CTL_TDP_THRESHILD_NORMAL 0 /*Normal TDP Threshold*/ +#define CTL_TDP_THRESHOLD_OFF 85 /* Normal at 85C */ +#define CTL_TDP_THRESHOLD_ON 90 /* Limited at 90C */ + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 104 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 95 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 105 + +#endif diff --git a/src/mainboard/google/auron/variants/lulu/pei_data.c b/src/mainboard/google/auron/variants/lulu/pei_data.c new file mode 100644 index 0000000000..be7626c4d7 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/pei_data.c @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + pei_data->ec_present = 1; + + /* One installed DIMM per channel -- can be changed by SPD init */ + pei_data->dimm_channel0_disabled = 2; + pei_data->dimm_channel1_disabled = 2; + + /* P0: Port B, CN01 (IOBoard) */ + pei_data_usb2_port(pei_data, 0, 0x0150, 1, 0, + USB_PORT_BACK_PANEL); + /* P1: Port A, CN01 */ + pei_data_usb2_port(pei_data, 1, 0x0040, 1, 2, + USB_PORT_BACK_PANEL); + /* P2: CCD */ + pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP, + USB_PORT_INTERNAL); + /* P3: BT */ + pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP, + USB_PORT_MINI_PCIE); + /* P4: Empty */ + pei_data_usb2_port(pei_data, 4, 0x0000, 0, USB_OC_PIN_SKIP, + USB_PORT_SKIP); + /* P5: EMPTY */ + pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP, + USB_PORT_SKIP); + /* P6: SD Card */ + pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP, + USB_PORT_FLEX); + /* P7: EMPTY */ + pei_data_usb2_port(pei_data, 7, 0x0000, 0, USB_OC_PIN_SKIP, + USB_PORT_SKIP); + + /* P0: PORTB*/ + pei_data_usb3_port(pei_data, 0, 1, 0, 0); + /* P1: PORTA */ + pei_data_usb3_port(pei_data, 1, 1, 2, 0); + /* P2: EMPTY */ + pei_data_usb3_port(pei_data, 2, 0, USB_OC_PIN_SKIP, 0); + /* P3: EMPTY */ + pei_data_usb3_port(pei_data, 3, 0, USB_OC_PIN_SKIP, 0); +} diff --git a/src/mainboard/google/auron/variants/lulu/spd/Makefile.inc b/src/mainboard/google/auron/variants/lulu/spd/Makefile.inc new file mode 100644 index 0000000000..bc1454f202 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/Makefile.inc @@ -0,0 +1,51 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## Copyright (C) 2015 Sage Electronic Engineering +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +romstage-y += spd.c + +SPD_BIN = $(obj)/spd.bin + +# { GPIO47, GPIO9, GPIO13, GPIO8} +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125 # 0b0000 2GB +SPD_SOURCES += empty # 0b0001 +SPD_SOURCES += empty # 0b0010 +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 # 0b0011 2GB +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646E-BYK0 # 0b0100 2GB +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646E-BYK0 # 0b0101 4GB +SPD_SOURCES += empty # 0b0110 +SPD_SOURCES += empty # 0b0111 +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125 # 0b1000 4GB +SPD_SOURCES += micron_4GiB_dimm_MT41K512M16TNA-125 # 0b1001 8GB +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA # 0b1010 2GB +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA # 0b1011 4GB +SPD_SOURCES += hynix_4GiB_dimm_H5TC8G63CMR-PBA # 0b1100 8GB +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 # 0b1101 4GB +SPD_SOURCES += samsung_4GiB_dimm_K4B8G1646Q-MYK0 # 0b1110 8GB +SPD_SOURCES += empty # 0b1111 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex) + +# Include spd rom data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/auron/variants/lulu/spd/empty.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/empty.spd.hex new file mode 100644 index 0000000000..e83f7e83f7 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/empty.spd.hex @@ -0,0 +1,16 @@ +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/hynix_2GiB_dimm_H5TC4G63AFR-PBA.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/hynix_2GiB_dimm_H5TC4G63AFR-PBA.spd.hex new file mode 100644 index 0000000000..ebb10f353f --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/hynix_2GiB_dimm_H5TC4G63AFR-PBA.spd.hex @@ -0,0 +1,32 @@ +92 12 0b 03 04 19 02 02 +03 52 01 08 0a 00 fe 00 +69 78 69 3c 69 11 18 81 +20 08 3c 3c 01 40 83 01 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0f 11 62 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 ad 01 +00 00 00 00 00 00 ff ab +48 4d 54 34 32 35 53 36 +41 46 52 36 41 2d 50 42 +20 20 4e 30 80 ad 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/hynix_4GiB_dimm_H5TC8G63CMR-PBA.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/hynix_4GiB_dimm_H5TC8G63CMR-PBA.spd.hex new file mode 100644 index 0000000000..3239846324 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/hynix_4GiB_dimm_H5TC8G63CMR-PBA.spd.hex @@ -0,0 +1,33 @@ +# H5TC8G63CMR-PBA +92 13 0b 03 04 19 02 0a +03 52 01 08 0a 00 fe 00 +69 78 69 3c 69 11 18 81 +20 08 3c 3c 01 40 83 01 +00 80 00 00 00 00 00 00 +00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0f 11 1f 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 ad 01 +00 00 00 00 00 00 b2 a3 +48 4d 54 38 35 31 53 36 +43 4d 52 36 41 2d 50 42 +20 20 4e 30 80 ad 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex new file mode 100644 index 0000000000..91d816d4ea --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex @@ -0,0 +1,32 @@ +92 11 0b 03 04 19 02 02 +03 11 01 08 0a 00 fe 00 +69 78 69 3c 69 11 18 86 +20 08 3c 3c 01 40 83 05 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0f 01 02 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2c 00 +00 00 00 00 00 00 19 d2 +34 4b 54 46 32 35 36 36 +34 48 5a 2d 31 47 36 45 +31 20 45 31 80 2c 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/micron_4GiB_dimm_MT41K512M16TNA-125.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/micron_4GiB_dimm_MT41K512M16TNA-125.spd.hex new file mode 100644 index 0000000000..0a27768a36 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/micron_4GiB_dimm_MT41K512M16TNA-125.spd.hex @@ -0,0 +1,33 @@ +# MT41K512M16TNA-125:E +92 11 0b 03 04 19 02 0A +03 11 01 08 0a 00 fe 00 +69 78 69 3c 69 11 18 81 +20 08 3c 3c 01 40 83 05 +00 80 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0f 11 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2c 00 +00 00 00 00 00 00 7f c1 +38 4b 54 53 35 31 32 36 +34 48 44 5a 2d 31 47 36 +45 31 45 31 80 2c 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex new file mode 100644 index 0000000000..5937a888ea --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex @@ -0,0 +1,17 @@ +# Samsung K4B4G1646E-BYK0 +92 13 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 62 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 00 00 00 00 CA 0F +4D 34 37 31 42 35 36 37 34 45 42 30 2D 59 4B 30 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646Q-HYK0.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646Q-HYK0.spd.hex new file mode 100644 index 0000000000..d6b0770334 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/samsung_2GiB_dimm_K4B4G1646Q-HYK0.spd.hex @@ -0,0 +1,17 @@ +# Samsung K4B4G1646Q-HYK0 +92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05 +00 00 00 00 00 00 00 00 88 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 00 00 00 00 6C F9 +4D 34 37 31 42 35 36 37 34 51 48 30 2D 59 4B 30 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/samsung_4GiB_dimm_K4B8G1646Q-MYK0.spd.hex b/src/mainboard/google/auron/variants/lulu/spd/samsung_4GiB_dimm_K4B8G1646Q-MYK0.spd.hex new file mode 100644 index 0000000000..4e7d8e41d8 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/samsung_4GiB_dimm_K4B8G1646Q-MYK0.spd.hex @@ -0,0 +1,17 @@ +# Samsung K4B8G1646Q-MYK0 +92 12 0B 03 04 19 02 0A 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 80 00 00 00 00 00 00 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 1F 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 00 00 00 00 00 00 +4D 34 37 31 42 35 31 37 34 51 4D 30 2D 59 4B 30 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \ No newline at end of file diff --git a/src/mainboard/google/auron/variants/lulu/spd/spd.c b/src/mainboard/google/auron/variants/lulu/spd/spd.c new file mode 100644 index 0000000000..ac99f5c7bc --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/spd/spd.c @@ -0,0 +1,139 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Sage Electronic Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void mainboard_print_spd_info(uint8_t spd[]) +{ + const int spd_banks[8] = { 8, 16, 32, 64, -1, -1, -1, -1 }; + const int spd_capmb[8] = { 1, 2, 4, 8, 16, 32, 64, 0 }; + const int spd_rows[8] = { 12, 13, 14, 15, 16, -1, -1, -1 }; + const int spd_cols[8] = { 9, 10, 11, 12, -1, -1, -1, -1 }; + const int spd_ranks[8] = { 1, 2, 3, 4, -1, -1, -1, -1 }; + const int spd_devw[8] = { 4, 8, 16, 32, -1, -1, -1, -1 }; + const int spd_busw[8] = { 8, 16, 32, 64, -1, -1, -1, -1 }; + char spd_name[SPD_PART_LEN+1] = { 0 }; + + int banks = spd_banks[(spd[SPD_DENSITY_BANKS] >> 4) & 7]; + int capmb = spd_capmb[spd[SPD_DENSITY_BANKS] & 7] * 256; + int rows = spd_rows[(spd[SPD_ADDRESSING] >> 3) & 7]; + int cols = spd_cols[spd[SPD_ADDRESSING] & 7]; + int ranks = spd_ranks[(spd[SPD_ORGANIZATION] >> 3) & 7]; + int devw = spd_devw[spd[SPD_ORGANIZATION] & 7]; + int busw = spd_busw[spd[SPD_BUS_DEV_WIDTH] & 7]; + + /* Module type */ + printk(BIOS_INFO, "SPD: module type is "); + switch (spd[SPD_DRAM_TYPE]) { + case SPD_DRAM_DDR3: + printk(BIOS_INFO, "DDR3\n"); + break; + case SPD_DRAM_LPDDR3: + printk(BIOS_INFO, "LPDDR3\n"); + break; + default: + printk(BIOS_INFO, "Unknown (%02x)\n", spd[SPD_DRAM_TYPE]); + break; + } + + /* Module Part Number */ + memcpy(spd_name, &spd[SPD_PART_OFF], SPD_PART_LEN); + spd_name[SPD_PART_LEN] = 0; + printk(BIOS_INFO, "SPD: module part is %s\n", spd_name); + + printk(BIOS_INFO, "SPD: banks %d, ranks %d, rows %d, columns %d, " + , banks, ranks, rows, cols); + printk(BIOS_INFO, "density %d Mb\n", capmb); + + printk(BIOS_INFO, "SPD: device width %d bits, bus width %d bits\n", + devw, busw); + + if (capmb > 0 && busw > 0 && devw > 0 && ranks > 0) { + /* SIZE = DENSITY / 8 * BUS_WIDTH / SDRAM_WIDTH * RANKS */ + printk(BIOS_INFO, "SPD: module size is %u MB (per channel)\n", + capmb / 8 * busw / devw * ranks); + } +} + +/* Copy SPD data for on-board memory */ +void mainboard_fill_spd_data(struct pei_data *pei_data) +{ + int spd_bits[4] = { + SPD_GPIO_BIT0, + SPD_GPIO_BIT1, + SPD_GPIO_BIT2, + SPD_GPIO_BIT3 + }; + int spd_gpio[4]; + int spd_index; + size_t spd_file_len; + char *spd_file; + + spd_gpio[0] = get_gpio(SPD_GPIO_BIT0); + spd_gpio[1] = get_gpio(SPD_GPIO_BIT1); + spd_gpio[2] = get_gpio(SPD_GPIO_BIT2); + spd_gpio[3] = get_gpio(SPD_GPIO_BIT3); + + spd_index = (spd_gpio[3] << 3) | (spd_gpio[2] << 2) | + (spd_gpio[1] << 1) | spd_gpio[0]; + + printk(BIOS_DEBUG, "SPD: index %d (GPIO%d=%d GPIO%d=%d GPIO%d=%d GPIO%d=%d)\n", + spd_index, + spd_bits[3], spd_gpio[3], + spd_bits[2], spd_gpio[2], + spd_bits[1], spd_gpio[1], + spd_bits[0], spd_gpio[0]); + + spd_file = cbfs_boot_map_with_leak("spd.bin", 0xab, &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + if (spd_file_len < ((spd_index + 1) * SPD_LEN)) { + printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); + spd_index = 0; + } + + if (spd_file_len < SPD_LEN) + die("Missing SPD data."); + + + /* CH0 */ + memcpy(pei_data->spd_data[0][0], + spd_file + (spd_index * SPD_LEN), SPD_LEN); + + /* CH1 not used in 2GB configurations */ + if (!((spd_index == 0b0000) || (spd_index == 0b0011) || + (spd_index == 0b1010))) { + memcpy(pei_data->spd_data[1][0], + spd_file + (spd_index * SPD_LEN), SPD_LEN); + } + + /* Make sure a valid SPD was found */ + if (pei_data->spd_data[0][0][0] == 0) + die("Invalid SPD data."); + + mainboard_print_spd_info(pei_data->spd_data[0][0]); +} diff --git a/src/mainboard/google/auron/variants/lulu/variant.c b/src/mainboard/google/auron/variants/lulu/variant.c new file mode 100644 index 0000000000..084d4d1300 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/variant.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +int variant_smbios_data(device_t dev, int *handle, + unsigned long *current) +{ + int len = 0; + + len += smbios_write_type41( + current, handle, + BOARD_TRACKPAD_NAME, /* name */ + BOARD_TRACKPAD_IRQ, /* instance */ + BOARD_TRACKPAD_I2C_BUS, /* segment */ + BOARD_TRACKPAD_I2C_ADDR, /* bus */ + 0, /* device */ + 0); /* function */ + + len += smbios_write_type41( + current, handle, + BOARD_TOUCHSCREEN_NAME, /* name */ + BOARD_TOUCHSCREEN_IRQ, /* instance */ + BOARD_TOUCHSCREEN_I2C_BUS, /* segment */ + BOARD_TOUCHSCREEN_I2C_ADDR, /* bus */ + 0, /* device */ + 0); /* function */ + + return len; +} + +void variant_romstage_entry(struct romstage_params *rp) +{ + /* N/A for boards other than SAMUS */ +} \ No newline at end of file -- cgit v1.2.3