From b29078e4015bbc3e8cf00ba64f0799c087546563 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Fri, 12 May 2017 21:16:41 +0200 Subject: mb/*/*: Remove rtc nvram configurable baud rate There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/mainboard/foxconn/g41s-k/cmos.default | 1 - src/mainboard/foxconn/g41s-k/cmos.layout | 11 +---------- 2 files changed, 1 insertion(+), 11 deletions(-) (limited to 'src/mainboard/foxconn/g41s-k') diff --git a/src/mainboard/foxconn/g41s-k/cmos.default b/src/mainboard/foxconn/g41s-k/cmos.default index 177af218c3..1519fe1b5e 100644 --- a/src/mainboard/foxconn/g41s-k/cmos.default +++ b/src/mainboard/foxconn/g41s-k/cmos.default @@ -1,5 +1,4 @@ boot_option=Fallback -baud_rate=115200 debug_level=Spew power_on_after_fail=Disable nmi=Enable diff --git a/src/mainboard/foxconn/g41s-k/cmos.layout b/src/mainboard/foxconn/g41s-k/cmos.layout index c67cf73d57..038e344ccc 100644 --- a/src/mainboard/foxconn/g41s-k/cmos.layout +++ b/src/mainboard/foxconn/g41s-k/cmos.layout @@ -44,11 +44,10 @@ entries # RTC_BOOT_BYTE (coreboot hardcoded) 384 1 e 4 boot_option 388 4 h 0 reboot_counter -#390 2 r 0 unused? +#390 5 r 0 unused? # ----------------------------------------------------------------- # coreboot config options: console -392 3 e 5 baud_rate 395 4 e 6 debug_level #399 1 r 0 unused @@ -80,14 +79,6 @@ enumerations 2 1 Disable 4 0 Fallback 4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 6 1 Emergency 6 2 Alert 6 3 Critical -- cgit v1.2.3