From 246ae2129eb091da06cf6275bd503dd5730060dc Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Thu, 8 Sep 2005 17:17:25 +0000 Subject: simplify code git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2012 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/emulation/qemu-i386/Config.lb | 35 +++--- src/mainboard/emulation/qemu-i386/Options.lb | 168 ++++++--------------------- src/mainboard/emulation/qemu-i386/chip.h | 1 - 3 files changed, 57 insertions(+), 147 deletions(-) (limited to 'src/mainboard/emulation') diff --git a/src/mainboard/emulation/qemu-i386/Config.lb b/src/mainboard/emulation/qemu-i386/Config.lb index c6655d9294..8b1e12010d 100644 --- a/src/mainboard/emulation/qemu-i386/Config.lb +++ b/src/mainboard/emulation/qemu-i386/Config.lb @@ -2,8 +2,11 @@ ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. ## +default ROM_SIZE = 256 * 1024 +default FALLBACK_SIZE = 128*1024 + if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_SIZE = 128 * 1024 # FALLBACK_SIZE default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) else default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) @@ -29,19 +32,22 @@ default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) ## XIP_ROM_SIZE must be a power of 2. ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE ## -default XIP_ROM_SIZE=65536 +default XIP_ROM_SIZE=32*1024 default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) -arch i386 end +## +## Set all of the defaults for an x86 architecture +## + +arch i386 end ## ## Build the objects we have code for in this directory. ## driver mainboard.o -if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -#object reset.o +object reset.o ## ## Romcc output @@ -58,11 +64,11 @@ end makerule ./auto.E depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=i386 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + action "./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=i386 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + action "./romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -111,11 +117,7 @@ end ## Setup RAM ## mainboardinit cpu/x86/fpu/enable_fpu.inc -#mainboardinit cpu/x86/mmx/enable_mmx.inc # emulators dont do mmx+sse -#mainboardinit cpu/x86/sse/enable_sse.inc mainboardinit ./auto.inc -#mainboardinit cpu/x86/sse/disable_sse.inc -#mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -123,8 +125,11 @@ mainboardinit ./auto.inc dir /pc80 config chip.h -chip northbridge/emulation/qemu-i386 - device pci_domain 0 on - end +chip cpu/emulation/qemu-i386 + device pci_domain 0 on + device pci 0.0 on end + device pci 1.0 on end +# register "com1" = "{1}" +# register "com1" = "{1, 0, 0x3f8, 4}" + end end - diff --git a/src/mainboard/emulation/qemu-i386/Options.lb b/src/mainboard/emulation/qemu-i386/Options.lb index d12a1c3592..27982ce4fb 100644 --- a/src/mainboard/emulation/qemu-i386/Options.lb +++ b/src/mainboard/emulation/qemu-i386/Options.lb @@ -3,66 +3,61 @@ uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP +uses USE_OPTION_TABLE +uses CONFIG_COMPRESS +uses CONFIG_ROM_STREAM +uses IRQ_SLOT_COUNT +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses LINUXBIOS_EXTRA_VERSION +uses ARCH uses FALLBACK_SIZE +uses STACK_SIZE +uses HEAP_SIZE uses ROM_SIZE uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM uses CONFIG_ROM_STREAM_START uses PAYLOAD_SIZE uses _ROMBASE +uses _RAMBASE uses XIP_ROM_SIZE uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses LINUXBIOS_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER -uses CONFIG_GDB_STUB +uses HAVE_MP_TABLE uses CROSS_COMPILE uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_CONSOLE_SERIAL8250 + + +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL + +default CONFIG_CONSOLE_SERIAL8250=1 +default DEFAULT_CONSOLE_LOGLEVEL=8 +default MAXIMUM_CONSOLE_LOGLEVEL=8 +## ROM_SIZE is the size of boot ROM that this board will use. +default ROM_SIZE = 256*1024 + ### ### Build options ### ## -## ROM_SIZE is the size of boot ROM that this board will use. -## -default ROM_SIZE=0x40000 - -## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## Build code for the fallback boot ## -default FALLBACK_SIZE=0x40000 +default HAVE_FALLBACK_BOOT=1 ## -## Build code for the fallback boot +## no MP table ## -default HAVE_FALLBACK_BOOT=1 +default HAVE_MP_TABLE=0 ## ## Build code to reset the motherboard from linuxBIOS @@ -73,51 +68,21 @@ default HAVE_HARD_RESET=0 ## Build code to export a programmable irq routing table ## default HAVE_PIRQ_TABLE=0 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=0 +default IRQ_SLOT_COUNT=5 +#object irq_tables.o ## ## Build code to export a CMOS option table ## default HAVE_OPTION_TABLE=1 -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=0 -default CONFIG_MAX_CPUS=2 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="x86" -default MAINBOARD_VENDOR="QEMU" - - ### ### LinuxBIOS layout values ### ## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. default ROM_IMAGE_SIZE = 65536 +default FALLBACK_SIZE = 131072 ## ## Use a small 8K stack @@ -132,21 +97,12 @@ default HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = 0 -## -## LinuxBIOS C code runs at this location in RAM -## -default _RAMBASE=0x00004000 +default _RAMBASE = 0x00004000 -## -## Load the payload from the ROM -## -default CONFIG_ROM_STREAM = 1 - -### -### Defaults of options that you may want to override in the target config file -### +default CONFIG_ROM_STREAM = 1 ## ## The default compiler @@ -154,56 +110,6 @@ default CONFIG_ROM_STREAM = 1 default CC="$(CROSS_COMPILE)gcc -m32" default HOSTCC="gcc" -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 - -# Select the serial console base port -default TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=9 -## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=9 +end -## -## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" -### End Options.lb -end diff --git a/src/mainboard/emulation/qemu-i386/chip.h b/src/mainboard/emulation/qemu-i386/chip.h index 51e37b1bc3..3aae25c769 100644 --- a/src/mainboard/emulation/qemu-i386/chip.h +++ b/src/mainboard/emulation/qemu-i386/chip.h @@ -1,5 +1,4 @@ extern struct chip_operations mainboard_emulation_qemu_i386_ops; struct mainboard_emulation_qemu_i386_config { - int nothing; }; -- cgit v1.2.3