From 0588d19abef62dad63a7794a37bdd6a71c526d9e Mon Sep 17 00:00:00 2001 From: Patrick Georgi Date: Wed, 12 Aug 2009 15:00:51 +0000 Subject: Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi tested on abuild only. Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/digitallogic/Kconfig | 1 + src/mainboard/digitallogic/adl855pc/devicetree.cb | 61 +++++++++++++++ src/mainboard/digitallogic/msm586seg/devicetree.cb | 16 ++++ src/mainboard/digitallogic/msm800sev/devicetree.cb | 86 ++++++++++++++++++++++ 4 files changed, 164 insertions(+) create mode 100644 src/mainboard/digitallogic/Kconfig create mode 100644 src/mainboard/digitallogic/adl855pc/devicetree.cb create mode 100644 src/mainboard/digitallogic/msm586seg/devicetree.cb create mode 100644 src/mainboard/digitallogic/msm800sev/devicetree.cb (limited to 'src/mainboard/digitallogic') diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/digitallogic/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb new file mode 100644 index 0000000000..f0106b0648 --- /dev/null +++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb @@ -0,0 +1,61 @@ +chip northbridge/intel/i855pm + device pci_domain 0 on + device pci 0.0 on end + device pci 1.0 on end + chip southbridge/intel/i82801dbm +# pci 11.0 on end +# pci 11.1 on end +# pci 11.2 on end +# pci 11.3 on end +# pci 11.4 on end +# pci 11.5 on end +# pci 11.6 on end +# pci 12.0 on end + register "enable_usb" = "0" + register "enable_native_ide" = "0" + register "enable_usb" = "0" + register "enable_native_ide" = "0" + chip superio/winbond/w83627hf # link 1 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + register "com1" = "{1}" + # register "com1" = "{1, 0, 0x3f8, 4}" + # register "lpt" = "{1}" + end + end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA479M + device apic 0 on end + end + end +end diff --git a/src/mainboard/digitallogic/msm586seg/devicetree.cb b/src/mainboard/digitallogic/msm586seg/devicetree.cb new file mode 100644 index 0000000000..30606b5b7e --- /dev/null +++ b/src/mainboard/digitallogic/msm586seg/devicetree.cb @@ -0,0 +1,16 @@ +chip cpu/amd/sc520 + device pci_domain 0 on + device pci 0.0 on end + + chip drivers/pci/onboard + device pci 12.0 on end # enet + end + chip drivers/pci/onboard + device pci 14.0 on end # 69000 + register "rom_address" = "0x2000000" + end +# register "com1" = "{1}" +# register "com1" = "{1, 0, 0x3f8, 4}" + end + +end diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb new file mode 100644 index 0000000000..9636dee678 --- /dev/null +++ b/src/mainboard/digitallogic/msm800sev/devicetree.cb @@ -0,0 +1,86 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + # How to get these? Boot linux and do this: + # rdmsr 0x51400025 + register "lpc_serirq_enable" = "0x0000105a" + # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits + register "lpc_serirq_polarity" = "0x0000EFA5" + # mode is high 10 bits (determined from code) + register "lpc_serirq_mode" = "1" + # Don't yet know how to find this. + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci f.1 on end # Flash controller + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end + +end + -- cgit v1.2.3