From d990455c0a8c90b778fe932771e9719e8140811b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20Niew=C3=B6hner?= Date: Wed, 25 Nov 2020 00:38:19 +0100 Subject: mb/clevo/cml-u: Configure IRQ as level triggered for HID over I2C MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx [2] https://review.coreboot.org/c/coreboot/+/47417/2/src/mainboard/google/hatch/variants/baseboard/gpio.c#b182 Tested successfully on Clevo L141CU. Change-Id: Ia232c0a11546aa6d17614f4cab07c255e58f2fed Signed-off-by: Michael Niewöhner Reviewed-on: https://review.coreboot.org/c/coreboot/+/47984 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb | 2 +- src/mainboard/clevo/cml-u/variants/l140cu/gpio.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'src/mainboard/clevo/cml-u') diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb index d9a642aab5..4a93065e76 100644 --- a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb +++ b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb @@ -107,7 +107,7 @@ chip soc/intel/cannonlake chip drivers/i2c/hid register "generic.hid" = ""ELAN040D"" register "generic.desc" = ""ELAN Touchpad"" - register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" register "generic.probed" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/gpio.c b/src/mainboard/clevo/cml-u/variants/l140cu/gpio.c index d5744ef3db..e567ef79d1 100644 --- a/src/mainboard/clevo/cml-u/variants/l140cu/gpio.c +++ b/src/mainboard/clevo/cml-u/variants/l140cu/gpio.c @@ -62,7 +62,7 @@ static const struct pad_config gpio_table[] = { PAD_NC(GPP_B2, UP_20K), /* CNVI_WAKE# (UART_WAKE# in M.2 spec; unused) */ - PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST),/* GPP_B3 (touchpad interrupt) */ + PAD_CFG_GPI_APIC_LOW(GPP_B3, NONE, PLTRST), /* GPP_B3 (touchpad interrupt) */ PAD_NC(GPP_B4, UP_20K), PAD_NC(GPP_B5, UP_20K), PAD_NC(GPP_B6, UP_20K), -- cgit v1.2.3