From 14e22779625de673569c7b950ecc2753fb915b31 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Tue, 27 Apr 2010 06:56:47 +0000 Subject: Since some people disapprove of white space cleanups mixed in regular commits while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/broadcom/blast/devicetree.cb | 6 +++--- src/mainboard/broadcom/blast/get_bus_conf.c | 8 ++++---- src/mainboard/broadcom/blast/irq_tables.c | 18 +++++++++--------- src/mainboard/broadcom/blast/mptable.c | 18 +++++++++--------- src/mainboard/broadcom/blast/resourcemap.c | 14 +++++++------- src/mainboard/broadcom/blast/romstage.c | 12 ++++++------ 6 files changed, 38 insertions(+), 38 deletions(-) (limited to 'src/mainboard/broadcom/blast') diff --git a/src/mainboard/broadcom/blast/devicetree.cb b/src/mainboard/broadcom/blast/devicetree.cb index a9cabe6bea..d06c590bf8 100644 --- a/src/mainboard/broadcom/blast/devicetree.cb +++ b/src/mainboard/broadcom/blast/devicetree.cb @@ -6,7 +6,7 @@ chip northbridge/amd/amdk8/root_complex end device pci_domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 0 chip southbridge/broadcom/bcm5780 # HT2000 device pci 0.0 on end # PXB 1 0x0130 @@ -95,7 +95,7 @@ chip northbridge/amd/amdk8/root_complex device pnp 2e.10 on #RTC io 0x60 = 0x70 io 0x62 = 0x72 - end + end end end device pci 1.3 on end # WDTimer 0x0238 @@ -110,7 +110,7 @@ chip northbridge/amd/amdk8/root_complex end # device pci 18.0 device pci 18.0 on end - device pci 18.0 on end + device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end diff --git a/src/mainboard/broadcom/blast/get_bus_conf.c b/src/mainboard/broadcom/blast/get_bus_conf.c index 9d1a4b1bf0..06f42f4092 100644 --- a/src/mainboard/broadcom/blast/get_bus_conf.c +++ b/src/mainboard/broadcom/blast/get_bus_conf.c @@ -21,7 +21,7 @@ unsigned char bus_bcm5785_1_1 = 9; unsigned apicid_bcm5785[3]; -unsigned pci1234x[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -115,9 +115,9 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - for(i=0;i<3;i++) + for(i=0;i<3;i++) apicid_bcm5785[i] = apicid_base+i; } diff --git a/src/mainboard/broadcom/blast/irq_tables.c b/src/mainboard/broadcom/blast/irq_tables.c index 3f6f73893e..406419d6d8 100644 --- a/src/mainboard/broadcom/blast/irq_tables.c +++ b/src/mainboard/broadcom/blast/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -16,7 +16,7 @@ static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t dev uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; @@ -64,22 +64,22 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_bcm5785_0; pirq->rtr_devfn = (sysconf.sbdn<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x1166; pirq->rtr_device = 0x0036; pirq->miniport_data = 0; memset(pirq->rfu, 0, sizeof(pirq->rfu)); - + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c pirq_info = (void *) ( &pirq->checksum + 1); @@ -87,11 +87,11 @@ unsigned long write_pirq_routing_table(unsigned long addr) //pci bridge write_pirq_info(pirq_info, bus_bcm5785_0, (sysconf.sbdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; + + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/broadcom/blast/mptable.c b/src/mainboard/broadcom/blast/mptable.c index 8a1b133bfb..d24630844e 100644 --- a/src/mainboard/broadcom/blast/mptable.c +++ b/src/mainboard/broadcom/blast/mptable.c @@ -72,12 +72,12 @@ static void *smp_write_config_table(void *v) } } } - + } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_bcm5785[0], 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_bcm5785[0], 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_bcm5785[0], 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_bcm5785[0], 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_bcm5785[0], 0x3); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_bcm5785[0], 0x4); @@ -89,7 +89,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_bcm5785[0], 0xc); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_bcm5785[0], 0xd); -//IDE +//IDE outb(0x02, 0xc00); outb(0x0e, 0xc01); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, apicid_bcm5785[0], 0xe); // IDE @@ -97,14 +97,14 @@ static void *smp_write_config_table(void *v) //SATA outb(0x07, 0xc00); outb(0x0f, 0xc01); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_1, (0x0e<<2)|0, apicid_bcm5785[0], 0xf); - + //USB outb(0x01, 0xc00); outb(0x0a, 0xc01); for(i=0;i<3;i++) { smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, apicid_bcm5785[0], 0xa); // } - + /* enable int */ /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ @@ -127,13 +127,13 @@ static void *smp_write_config_table(void *v) } -//pci slot (on bcm5785) +//pci slot (on bcm5785) for(i=0;i<4;i++) { smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, (4<<2)|i, apicid_bcm5785[1], i%2); // } -//onboard ati +//onboard ati smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, (5<<2)|0, apicid_bcm5785[1], 0x1); //PCI-X on bcm5780 @@ -157,7 +157,7 @@ static void *smp_write_config_table(void *v) } -// Second PCI-E x8 +// Second PCI-E x8 for(i=0;i<4;i++) { smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5780[3], (0<<2)|i, apicid_bcm5785[1], 0xc); // } diff --git a/src/mainboard/broadcom/blast/resourcemap.c b/src/mainboard/broadcom/blast/resourcemap.c index 438605c701..71f0bba010 100644 --- a/src/mainboard/broadcom/blast/resourcemap.c +++ b/src/mainboard/broadcom/blast/resourcemap.c @@ -119,7 +119,7 @@ static void setup_blast_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, /* Memory-Mapped I/O Base i Registers * F1:0x80 i = 0 @@ -144,7 +144,7 @@ static void setup_blast_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -181,7 +181,7 @@ static void setup_blast_resource_map(void) * This field defines the end of PCI I/O region n * [31:25] Reserved */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, @@ -200,7 +200,7 @@ static void setup_blast_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_blast_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, @@ -252,8 +252,8 @@ static void setup_blast_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration regin i */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, }; diff --git a/src/mainboard/broadcom/blast/romstage.c b/src/mainboard/broadcom/blast/romstage.c index 35823bd47c..13f5f97414 100644 --- a/src/mainboard/broadcom/blast/romstage.c +++ b/src/mainboard/broadcom/blast/romstage.c @@ -3,7 +3,7 @@ #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 #endif - + #include #include #include @@ -75,7 +75,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "lib/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #include "cpu/amd/dualcore/dualcore.c" @@ -109,7 +109,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) struct mem_controller ctrl[8]; unsigned nodes; - if (!cpu_init_detectedx && boot_cpu()) { + if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ @@ -130,7 +130,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); // post_code(0x33); - + uart_init(); // post_code(0x34); @@ -142,7 +142,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n"); setup_blast_resource_map(); - + #if 0 dump_pci_device(PCI_DEV(0, 0x18, 0)); dump_pci_device(PCI_DEV(0, 0x19, 0)); @@ -174,7 +174,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enable_smbus(); -#if 0 +#if 0 int i; for(i=4;i<8;i++) { change_i2c_mux(i); -- cgit v1.2.3