From 0588d19abef62dad63a7794a37bdd6a71c526d9e Mon Sep 17 00:00:00 2001 From: Patrick Georgi Date: Wed, 12 Aug 2009 15:00:51 +0000 Subject: Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi tested on abuild only. Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/bcom/winnet100/devicetree.cb | 56 ++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 src/mainboard/bcom/winnet100/devicetree.cb (limited to 'src/mainboard/bcom/winnet100') diff --git a/src/mainboard/bcom/winnet100/devicetree.cb b/src/mainboard/bcom/winnet100/devicetree.cb new file mode 100644 index 0000000000..872b8f389d --- /dev/null +++ b/src/mainboard/bcom/winnet100/devicetree.cb @@ -0,0 +1,56 @@ +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 0f.0 on end # Ethernet (onboard) + device pci 12.0 on # ISA bridge + chip superio/nsc/pc97317 # Super I/O + device pnp 2e.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC, Advanced power control (APC) + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # Floppy (N/A on this board) + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 on # COM2 (used for smartcard reader) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power management + io 0x60 = 0xe8 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "0" # Not available/needed on this board + end + end + chip cpu/amd/model_gx1 # CPU + end +end -- cgit v1.2.3