From 86f992c38a2b64619d924adf66d77f4fe8494b81 Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Fri, 13 Jul 2012 11:36:08 +0200 Subject: Add preliminary support for Bachmann electronic OT200 Linux boots fine :) Change-Id: Ifda06e5220666534b87f528deae16d8b956c32b3 Signed-off-by: Christian Gmeiner Reviewed-on: http://review.coreboot.org/1225 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/bachmann/ot200/devicetree.cb | 36 ++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 src/mainboard/bachmann/ot200/devicetree.cb (limited to 'src/mainboard/bachmann/ot200/devicetree.cb') diff --git a/src/mainboard/bachmann/ot200/devicetree.cb b/src/mainboard/bachmann/ot200/devicetree.cb new file mode 100644 index 0000000000..92c973d7e9 --- /dev/null +++ b/src/mainboard/bachmann/ot200/devicetree.cb @@ -0,0 +1,36 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 + register "lpc_serirq_enable" = "0x00000000" + register "lpc_serirq_polarity" = "0x00000000" + register "lpc_serirq_mode" = "0" + register "enable_gpio_int_route" = "0x0C0D0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "1" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "1" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 4.0 on end # Ethernet 0 + device pci f.0 on end # ISA Bridge + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + device pci f.7 on end # UOC + end + end + # APIC cluster is late CPU init. + device lapic_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end -- cgit v1.2.3