From 65ddbb720b1d5e7bcf32a3e112f06f5afbeb1100 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Sat, 19 May 2018 17:42:49 +0200 Subject: mb/asus/p8h61-m_pro: Add new mainboard Tested with GRUB 2.02 as a payload, booting Arch Linux as well as Debian. This code is based on the output of autoport as well as other mainboards supported in coreboot already. Working: - Serial port I/O - S3 suspend/resume. Untested with SeaBIOS since it failed to resume on a similar board. It is likely to be due to low memory corruption, but I have not worked on it. - USB ports and headers - USB3 ports attached to the ASM1042 controller. SeaBIOS can boot from them, and it is likely GRUB can detect devices on those ports as well. The chip has a small SPI flash nearby, which seems to hold an Option ROM. - Gigabit Ethernet - Integrated graphics (libgfxinit) - VGA BIOS for integrated graphics init - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. - NVRAM settings. Only debug_level has been tested. Untested: - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. Thus, gma-mainboard.ads has been setup accordingly. - PS/2 port. - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port header. - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - Booting from devices attached to the ASM1061 controller. Devices on ports work fine once Linux has loaded. - Any SATA devices with Tianocore (payload issue) Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/26419 Reviewed-by: Nico Huber Reviewed-by: Paul Menzel Tested-by: build bot (Jenkins) --- src/mainboard/asus/p8h61-m_pro/cmos.default | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 src/mainboard/asus/p8h61-m_pro/cmos.default (limited to 'src/mainboard/asus/p8h61-m_pro/cmos.default') diff --git a/src/mainboard/asus/p8h61-m_pro/cmos.default b/src/mainboard/asus/p8h61-m_pro/cmos.default new file mode 100644 index 0000000000..6f3cec735e --- /dev/null +++ b/src/mainboard/asus/p8h61-m_pro/cmos.default @@ -0,0 +1,6 @@ +boot_option=Fallback +debug_level=Debug +power_on_after_fail=Enable +nmi=Enable +sata_mode=AHCI +gfx_uma_size=32M -- cgit v1.2.3