From 5ffb5a76c605e493d714bbbe53b0f699854c7289 Mon Sep 17 00:00:00 2001 From: Keith Hui Date: Tue, 19 May 2020 20:17:37 -0400 Subject: mb/asus/p2b: Enable hardware monitor access via I/O on ISA bus Set up a 8-byte I/O range at 0x290-0x297 as PIIX4's generic device 9, which activates a chip select when this range is accessed. On the P2B family it connects to the W83781D hardware monitor, allowing access to it over the ISA bus, just like vendor firmware. Apparently this does not work on p3b-f, but no ill effects observed either. TEST=On p2b-ls lm-sensors can detect chip and get readings over ISA. Change-Id: Iaed1df7230359e94c580c305f4769c8bb4f5fce0 Signed-off-by: Keith Hui Reviewed-on: https://review.coreboot.org/c/coreboot/+/41561 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons --- src/mainboard/asus/p2b/mainboard.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 src/mainboard/asus/p2b/mainboard.c (limited to 'src/mainboard/asus/p2b') diff --git a/src/mainboard/asus/p2b/mainboard.c b/src/mainboard/asus/p2b/mainboard.c new file mode 100644 index 0000000000..87838b44c3 --- /dev/null +++ b/src/mainboard/asus/p2b/mainboard.c @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +/** + * Mainboard specific enables. + * + * @param chip_info Ignored + */ +static void mainboard_init(void *chip_info) +{ + const pci_devfn_t px43 = PCI_DEV(0, 4, 3); + u32 reg; + /* + * Set up an 8-byte generic I/O decode block at device 9. + * This will be for W83781D hardware monitor. + * Port 0x290 mask 0x007 + * + * This should enable access to W83781D over the ISA bus. + */ + reg = pci_s_read_config32(px43, DEVRESB); + reg |= (0x290 | (0xe7 << 16)); + pci_s_write_config32(px43, DEVRESB, reg); +} + +struct chip_operations mainboard_ops = { + .init = mainboard_init +}; -- cgit v1.2.3