From 649f18f834aaf13674e4c8e9a192b386165b39f1 Mon Sep 17 00:00:00 2001 From: Denis 'GNUtoo' Carikli Date: Thu, 9 May 2013 16:14:59 +0200 Subject: Asus M4A785T-M: Add CMOS defaults. After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Idea03b9bc75c5c34c7ce521ce5e5a1c1bb6dfa96 Signed-off-by: Denis 'GNUtoo' Carikli Reviewed-on: http://review.coreboot.org/3324 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc --- src/mainboard/asus/m4a785t-m/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'src/mainboard/asus/m4a785t-m/Kconfig') diff --git a/src/mainboard/asus/m4a785t-m/Kconfig b/src/mainboard/asus/m4a785t-m/Kconfig index 10f6838ea7..6816d58ce0 100644 --- a/src/mainboard/asus/m4a785t-m/Kconfig +++ b/src/mainboard/asus/m4a785t-m/Kconfig @@ -12,6 +12,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT select SUPERIO_ITE_IT8712F select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY -- cgit v1.2.3