From 0e615007ecc6b1fe57fb08fc044ad7f888037f78 Mon Sep 17 00:00:00 2001 From: Alec Ari Date: Sun, 21 Aug 2011 22:17:35 -0500 Subject: Remove dead code Remove dead code, copy and pasted from tilapia's mainboard.c file into various asus mainboard.c files Change-Id: Ic715ccaad8ac0210401d4a99ecb11e943f6afe58 Signed-off-by: Alec Ari Reviewed-on: http://review.coreboot.org/168 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- src/mainboard/asus/m4a785-m/mainboard.c | 29 ----------------------------- 1 file changed, 29 deletions(-) (limited to 'src/mainboard/asus/m4a785-m/mainboard.c') diff --git a/src/mainboard/asus/m4a785-m/mainboard.c b/src/mainboard/asus/m4a785-m/mainboard.c index e490f31886..8a96476bb4 100644 --- a/src/mainboard/asus/m4a785-m/mainboard.c +++ b/src/mainboard/asus/m4a785-m/mainboard.c @@ -95,35 +95,6 @@ void set_pcie_reset() pci_write_config16(sm_dev, 0x7e, word); } -#if 0 /* TODO: */ -/******************************************************** -* tilapia uses SB700 GPIO8 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 8. So we read Gpio 8 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void get_ide_dma66(void) -{ - u8 byte; - /*u32 sm_dev, ide_dev; */ - device_t sm_dev, ide_dev; - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 4); /* Set Gpio8 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if ((1 << 4) & pci_read_config8(sm_dev, 0xAA)) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - pci_write_config8(ide_dev, 0x56, byte); -} -#endif - /* * justify the dev3 is exist or not * NOTE: This just copied from AMD Tilapia code. -- cgit v1.2.3