From 4551b68c83e7693ae0b079dce9e4dcaf35050fa2 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Tue, 24 Nov 2015 14:12:08 -0600 Subject: mainboard/asus/kcma-d8: Copy ASUS KGPE-D16 for initial support work Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work around Jenkins failures caused by an unmodified clone. Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1 Signed-off-by: Timothy Pearson Reviewed-on: https://review.coreboot.org/13521 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/mainboard/asus/kcma-d8/acpi/pm_ctrl.asl | 368 ++++++++++++++++++++++++++++ 1 file changed, 368 insertions(+) create mode 100644 src/mainboard/asus/kcma-d8/acpi/pm_ctrl.asl (limited to 'src/mainboard/asus/kcma-d8/acpi') diff --git a/src/mainboard/asus/kcma-d8/acpi/pm_ctrl.asl b/src/mainboard/asus/kcma-d8/acpi/pm_ctrl.asl new file mode 100644 index 0000000000..658d87788b --- /dev/null +++ b/src/mainboard/asus/kcma-d8/acpi/pm_ctrl.asl @@ -0,0 +1,368 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Raptor Engineering + * Copyright (C) 2009 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Port 80 POST card debug */ +OperationRegion (DBG0, SystemIO, 0x80, One) + Field (DBG0, ByteAcc, NoLock, Preserve) { + DBG8, 8 +} + +/* SuperIO control port */ +Name (SPIO, 0x2E) + +/* SuperIO control map */ +OperationRegion (SPIM, SystemIO, SPIO, 0x02) + Field (SPIM, ByteAcc, NoLock, Preserve) { + INDX, 8, + DATA, 8 +} + +/* SuperIO control registers */ +IndexField (INDX, DATA, ByteAcc, NoLock, Preserve) { + Offset (0x07), + CR07, 8, /* Logical device number */ + Offset (0x2C), + CR2C, 8, /* GPIO3 multiplexed pin selection */ + Offset (0x30), + CR30, 8, /* Logical device activation control register */ + Offset (0xE0), + CRE0, 8, /* Wake control register */ + Offset (0xE4), + CRE4, 8, /* Standby power control register */ + Offset (0xE6), + CRE6, 8, /* Mouse wake event configuration register */ + Offset (0xF1), + CRF1, 8, /* GPIO3 data register */ + Offset (0xF3), + CRF3, 8, /* SUSLED mode register */ + Offset (0xF6), + CRF6, 8, /* SMI/PME event generation control register */ + Offset (0xF9), + CRF9, 8, /* ACPI PME configuration register */ +} + +/* Power Management I/O registers */ +OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, +} +IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + , 2, + BCDL, 1, + Offset(0x68), /* MiscEnable68 */ + , 2, + MAPC, 1, + TMTE, 1, + , 1, + Offset(0x7C), /* MiscEnable7C */ + , 2, + BLNK, 2, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, +} + +/* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ +OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, +} + +/* Wake status package */ +Name(WKST,Package() {Zero, Zero}) + +/* + * \_WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ +Method(\_WAK, 1) { + Store (0x20, DBG8) + + /* Set up LEDs */ + /* Set power LED to steady on */ + Store(0x0, BLNK) + + /* Configure SuperIO for wake */ + /* Access SuperIO ACPI device */ + Store(0x87, INDX) + Store(0x87, INDX) + Store(0x0A, CR07) + + if (LEqual(Arg0, One)) /* Resuming from power state S1 */ + { + /* Deactivate the ACPI device */ + Store(Zero, CR30) + + /* Disable PS/2 SMI/PME events */ + And(CRF6, 0xCF, CRF6) + } + if (Lor(LEqual(Arg0, 0x03), LEqual(Arg0, 0x04))) /* Resuming from power state S3 or S4 */ + { + /* Disable PS/2 wake */ + And(CRE0, 0x1D, CRE0) + And(CRE6, 0x7F, CRE6) + } + + /* Restore default SuperIO access */ + Store(0xAA, INDX) + + Store (0x21, DBG8) + + /* Re-enable HPET */ + Store(1, HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0, 3)){ + Store(1, URRE) + } + + /* Configure southbridge for wake */ + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, Local1) + Store(Local1, PWST) + + Store (0x22, DBG8) + + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + + Return(WKST) +} + +/* + * \_PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ +Method(\_PTS, 1) { + Store (Arg0, DBG8) + + /* Set up LEDs */ + if (LEqual(Arg0, One)) /* Power state S1 requested */ + { + /* Set suspend LED to 0.25Hz toggle pulse with 50% duty cycle */ + Store(0x2, BLNK) + } + + /* Configure SuperIO for sleep */ + /* Access SuperIO ACPI device */ + Store(0x87, INDX) + Store(0x87, INDX) + Store(0x0A, CR07) + + /* Disable PS/2 wakeup and connect PANSW_IN to PANSW_OUT */ + And(CRE0, 0x1F, CRE0) + + if (LEqual(Arg0, One)) /* Power state S1 requested */ + { + /* Activate the ACPI device */ + Store(One, CR30) + + /* Disable SMI/PME events for: + * LPT + * FDC + * UART + */ + Store(0x00, CRF6) + + /* Enable PS/2 keyboard SMI/PME events */ + Or(CRF6, 0x10, CRF6) + + /* Enable PS/2 keyboard wake */ + Or(CRE0, 0x40, CRE0) + + /* Enable PS/2 mouse SMI/PME events */ + Or(CRF6, 0x20, CRF6) + + /* Enable PS/2 mouse wake */ + Or(CRE0, 0x20, CRE0) + } else { + /* Enable PS/2 keyboard wake on any keypress */ + Or(CRE0, 0x41, CRE0) + + /* Enable PS/2 mouse wake on any click */ + Or(CRE0, 0x22, CRE0) + Or(CRE6, 0x80, CRE6) + + if (LEqual(Arg0, 0x03)) /* Power state S3 requested */ + { + /* Set VSBGATE# to provide standby power during S3 */ + Or(CRE4, 0x10, CRE4) + } + } + + /* Restore default SuperIO access */ + Store(0xAA, INDX) + + Store (0x10, DBG8) + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0, 3)){ + Store(0, URRE) + } + + /* Configure southbridge for sleep */ + /* Use bus clock for delay timebase */ + Store(0, BCDL) + /* Defer APIC interrupts until first ACPI access */ + Store(One, MAPC) + + /* On older chips, clear PciExpWakeDisEn */ + // if (LLessEqual(SBRI, 0x13)) { + // Store(0, PWDE) + // } + + Store (0x11, DBG8) + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) +} -- cgit v1.2.3