From f0303dbf919e1a207f2f689e5b344f8e4cee0ab4 Mon Sep 17 00:00:00 2001 From: Maxim Polyakov Date: Sun, 23 Feb 2020 10:51:00 +0300 Subject: mb/asrock/h110m: Explain why some SATA ports are empty Change-Id: Ib0a24fab22ee082367b82b3e8ee7383f1f02a4ad Signed-off-by: Maxim Polyakov Reviewed-on: https://review.coreboot.org/c/coreboot/+/39119 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons --- src/mainboard/asrock/h110m/devicetree.cb | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'src/mainboard/asrock') diff --git a/src/mainboard/asrock/h110m/devicetree.cb b/src/mainboard/asrock/h110m/devicetree.cb index fa94dd9e5b..d42d91e556 100644 --- a/src/mainboard/asrock/h110m/devicetree.cb +++ b/src/mainboard/asrock/h110m/devicetree.cb @@ -180,6 +180,11 @@ chip soc/intel/skylake # SATA register "EnableSata" = "1" register "SataSalpSupport" = "1" + # SATA4 and SATA5 are located in the lower right corner of the board, + # but they are not populated. This is because the same PCB is used to + # make boards with better PCHs, which can have up to six SATA ports. + # However, the H110 PCH only has four SATA ports, which explains why + # two connectors are missing. register "SataPortsEnable" = "{ \ [0] = 1, \ [1] = 1, \ @@ -190,8 +195,6 @@ chip soc/intel/skylake [6] = 0, \ [7] = 0, \ }" - # SATA4 and SATA5 are located in the lower right corner - # of the board, but there is no connector for this # PCH UART, SPI, I2C register "SerialIoDevMode" = "{ \ -- cgit v1.2.3