From 5a403191cb1e2988f4d973a20fe15d969e637807 Mon Sep 17 00:00:00 2001 From: Marshall Buschman Date: Sat, 4 Jun 2011 15:43:38 +0000 Subject: Port persimmon r6573 to e350m1: VGA, PCI MMIO and SB800 legacy 1) Use D18F1xF4 VGA Enable to simplify legacy video I/O support. 2) Extend PCI MMIO limit from dfffffff to fecfffff. 3) Add AMD recommended non-posted mapping for SB800 legacy devices. Signed-off-by: Marshall Buschman Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6622 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/asrock/e350m1/agesawrapper.c | 37 +++++++++++++++--------------- 1 file changed, 19 insertions(+), 18 deletions(-) (limited to 'src/mainboard/asrock') diff --git a/src/mainboard/asrock/e350m1/agesawrapper.c b/src/mainboard/asrock/e350m1/agesawrapper.c index 649fcb72e4..e946a3bd0a 100644 --- a/src/mainboard/asrock/e350m1/agesawrapper.c +++ b/src/mainboard/asrock/e350m1/agesawrapper.c @@ -85,38 +85,39 @@ agesawrapper_amdinitcpuio ( PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader; - /* Enable MMIO on AMD CPU Address Map Controller */ - - /* Start to set MMIO 0000A0000-0000BFFFF to Node0 Link0 */ + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00000B00; + PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 + PciData |= 1 << 7; // set NP (non-posted) bit LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = 0x00000A03; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Set TOM-DFFFFFFF to Node0 Link0. */ + PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00DFFF00; + PciData = 0x00FECF00; // last address before non-posted range LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); MsrReg = (MsrReg >> 8) | 3; PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); PciData = (UINT32)MsrReg; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - /* Set E0000000-FFFFFFFF to Node0 Link0 with NP set. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xBC); - PciData = 0x00FFFF00 | 0x80; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xB8); - PciData = (PCIE_BASE_ADDRESS >> 8) | 03; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - /* Start to set PCIIO 0000-FFFF to Node0 Link0 with ISA&VGA set. */ + + /* Send all IO (0000-FFFF) to southbridge. */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); PciData = 0x0000F000; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000013; + PciData = 0x00000003; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); Status = AGESA_SUCCESS; return (UINT32)Status; -- cgit v1.2.3