From 0901d03085e091a26fdc00da09a1e8e0b05adf86 Mon Sep 17 00:00:00 2001 From: Felix Singer Date: Wed, 29 Jul 2020 19:57:25 +0200 Subject: soc/intel/skylake: Enable SATA depending on devicetree configuration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently SATA gets enabled by the option EnableSata, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SATA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableSata setting. Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a Signed-off-by: Felix Singer Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843 Tested-by: build bot (Jenkins) Reviewed-by: Michael Niewöhner --- src/mainboard/asrock/h110m/devicetree.cb | 1 - 1 file changed, 1 deletion(-) (limited to 'src/mainboard/asrock/h110m/devicetree.cb') diff --git a/src/mainboard/asrock/h110m/devicetree.cb b/src/mainboard/asrock/h110m/devicetree.cb index 977fa2982d..c185b10143 100644 --- a/src/mainboard/asrock/h110m/devicetree.cb +++ b/src/mainboard/asrock/h110m/devicetree.cb @@ -154,7 +154,6 @@ chip soc/intel/skylake register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SATA - register "EnableSata" = "1" register "SataSalpSupport" = "1" # SATA4 and SATA5 are located in the lower right corner of the board, # but they are not populated. This is because the same PCB is used to -- cgit v1.2.3