From 5ff7c13e858a31addf1558731a12cf6c753b576d Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Mon, 31 Oct 2011 12:56:45 -0700 Subject: remove trailing whitespace Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/asrock/e350m1/dimmSpd.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'src/mainboard/asrock/e350m1/dimmSpd.c') diff --git a/src/mainboard/asrock/e350m1/dimmSpd.c b/src/mainboard/asrock/e350m1/dimmSpd.c index 8ef1b4c650..24e2617c0f 100644 --- a/src/mainboard/asrock/e350m1/dimmSpd.c +++ b/src/mainboard/asrock/e350m1/dimmSpd.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include "Porting.h" #include "AGESA.h" #include "amdlib.h" @@ -55,7 +55,7 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset) UINT64 limit; address |= 1; // set read bit - + __outbyte (iobase + 0, 0xFF); // clear error status __outbyte (iobase + 1, 0x1F); // clear error status __outbyte (iobase + 3, offset); // offset in eeprom @@ -112,7 +112,7 @@ static int readSmbusByte (int iobase, int address, char *buffer) * * readspd - Read one or more SPD bytes from a DIMM. * Start with offset zero and read sequentially. - * Optimization relies on autoincrement to avoid + * Optimization relies on autoincrement to avoid * sending offset for every byte. * Reads 128 bytes in 7-8 ms at 400 KHz. */ @@ -131,7 +131,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count) error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]); if (error) return error; } - + return 0; } @@ -154,11 +154,11 @@ AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PA { int spdAddress, ioBase; - if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; - if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; + if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; + if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR; - - spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; + + spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; if (spdAddress == 0) return AGESA_ERROR; ioBase = 0xB00; setupFch (ioBase); -- cgit v1.2.3