From 9c2255c66c20cd90f39cc08c1220d93222d5d580 Mon Sep 17 00:00:00 2001 From: Nikolay Petukhov Date: Sat, 29 Mar 2008 16:59:27 +0000 Subject: Now coreboot performs IRQ routing for some boards. You can see this by executing commands like this: grep -r pci_assign_irqs coreboot/src/* This basically AMD/LX based boards: pcengines/alix1c, digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800. Also for AMD/GX1 based boards need a patch [http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch] for the right IRQ setup. AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320, bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p. I have two ideas. 1. Delete duplicate code from AMD/LX based boards. 2. Add IRQ routing for AMD/GX1 boards in coreboot. The pirq.patch for IRQ routing logically consist from of two parts: First part of pirq.patch independent from type chipsets and assign IRQ for ever PCI device. It part based on AMD/LX write_pirq_routing_table() function. Second part of pirq.patch depends of type chipset and set PIRQx lines in interrupt router. This part supports only CS5530/5536 interrupt routers. IRQ routing functionality is included through PIRQ_ROUTE in Config.lb. Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on TeleVideo TC7020, see http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html. Signed-off-by: Nikolay Petukhov Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/artecgroup/dbe61/Options.lb | 3 ++- src/mainboard/artecgroup/dbe61/irq_tables.c | 41 ++--------------------------- 2 files changed, 4 insertions(+), 40 deletions(-) (limited to 'src/mainboard/artecgroup') diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb index d95f0a9bf7..9a35425463 100644 --- a/src/mainboard/artecgroup/dbe61/Options.lb +++ b/src/mainboard/artecgroup/dbe61/Options.lb @@ -48,6 +48,7 @@ uses CONFIG_VIDEO_MB uses USE_DCACHE_RAM uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE +uses PIRQ_ROUTE ## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE = 256*1024 @@ -84,7 +85,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## default HAVE_PIRQ_TABLE=1 default IRQ_SLOT_COUNT=3 - +default PIRQ_ROUTE=1 #object irq_tables.o ## diff --git a/src/mainboard/artecgroup/dbe61/irq_tables.c b/src/mainboard/artecgroup/dbe61/irq_tables.c index 1c06e1d8c7..b42c4b514e 100644 --- a/src/mainboard/artecgroup/dbe61/irq_tables.c +++ b/src/mainboard/artecgroup/dbe61/irq_tables.c @@ -64,42 +64,5 @@ const struct irq_routing_table intel_irq_routing_table = { unsigned long write_pirq_routing_table(unsigned long addr) { - int i, j, k, num_entries; - unsigned char pirq[4]; - uint16_t chipset_irq_map; - uint32_t pciAddr, pirtable_end; - struct irq_routing_table *pirq_tbl; - - pirtable_end = copy_pirq_routing_table(addr); - - /* Set up chipset IRQ steering. */ - pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C; - chipset_irq_map = (PIRQD << 12 | PIRQC << 8 | PIRQB << 4 | PIRQA); - printk_debug("%s(%08X, %04X)\n", __FUNCTION__, pciAddr, - chipset_irq_map); - outl(pciAddr & ~3, 0xCF8); - outl(chipset_irq_map, 0xCFC); - - pirq_tbl = (struct irq_routing_table *)(addr); - num_entries = (pirq_tbl->size - 32) / 16; - - /* Set PCI IRQs. */ - for (i = 0; i < num_entries; i++) { - printk_debug("PIR Entry %d Dev/Fn: %X Slot: %d\n", i, - pirq_tbl->slots[i].devfn, pirq_tbl->slots[i].slot); - for (j = 0; j < 4; j++) { - printk_debug("INT: %c bitmap: %x ", 'A' + j, - pirq_tbl->slots[i].irq[j].bitmap); - for (k = 0; (!((pirq_tbl->slots[i].irq[j].bitmap >> k) & 1)) && (pirq_tbl->slots[i].irq[j].bitmap != 0); k++) ; /* Finds lsb in bitmap to IRQ#. */ - pirq[j] = k; - printk_debug("PIRQ: %d\n", k); - } - - /* Bus, device, slots IRQs for {A,B,C,D}. */ - pci_assign_irqs(pirq_tbl->slots[i].bus, - pirq_tbl->slots[i].devfn >> 3, pirq); - } - - /* Put the PIR table in memory and checksum. */ - return pirtable_end; -} \ No newline at end of file + return copy_pirq_routing_table(addr); +} -- cgit v1.2.3