From 8e3464109e47945b1a4d7e3dd0c6e291593de70a Mon Sep 17 00:00:00 2001 From: Indrek Kruusa Date: Thu, 3 Aug 2006 16:48:18 +0000 Subject: Changelog: * src/cpu/amd/model_lx/model_lx_init.c L2 cache initialization removed (moved to northbridge.c) * src/include/cpu/amd/lxdef.h more checked values * src/northbridge/amd/lx/northbridge.c L2 cache initialization added cpubug() commented out * src/northbridge/amd/lx/raminit.c empty function sdram_set_registers() is in use, don't remove * src/mainboard/artecgroup/dbe61/Config.lb irqmap changes * src/mainboard/artecgroup/dbe61/irq_tables.c tentative changes to irq table (currently not in use) * src/mainboard/artecgroup/dbe61/mainboard.c irq assigned manually to NIC * src/mainboard/artecgroup/dbe61/Options.lb gcc 4.0 is OK * targets/artecgroup/dbe61/Config.lb 64K for VSA is OK at moment Signed-off-by: Indrek Kruusa Signed-off-by: Andrei Birjukov git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/artecgroup/dbe61/Config.lb | 18 +++++------- src/mainboard/artecgroup/dbe61/Options.lb | 9 +++--- src/mainboard/artecgroup/dbe61/irq_tables.c | 45 ++++++++++++++++++++++++----- src/mainboard/artecgroup/dbe61/mainboard.c | 44 ++++++++++++++-------------- 4 files changed, 73 insertions(+), 43 deletions(-) (limited to 'src/mainboard/artecgroup') diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb index a343b31edb..085685279b 100644 --- a/src/mainboard/artecgroup/dbe61/Config.lb +++ b/src/mainboard/artecgroup/dbe61/Config.lb @@ -124,8 +124,8 @@ dir /pc80 config chip.h chip northbridge/amd/lx - register "irqmap" = "0xcab9" - register "setupflash" = "0" + register "irqmap" = "0xcba5" + register "setupflash" = "1" device apic_cluster 0 on chip cpu/amd/model_lx device apic 0 on end @@ -138,20 +138,18 @@ chip northbridge/amd/lx register "enable_gpio0_inta" = "1" register "enable_ide_nand_flash" = "1" register "enable_uarta" = "1" - register "audio_irq" = "5" - register "usbf4_irq" = "10" - register "usbf5_irq" = "10" - register "usbf6_irq" = "0" - register "usbf7_irq" = "0" + register "audio_irq" = "11" + register "usbf4_irq" = "5" + register "usbf5_irq" = "5" + register "usbf6_irq" = "5" + register "usbf7_irq" = "5" device pci d.0 on end # Realtek 8139 LAN device pci f.0 on end # ISA Bridge device pci f.2 on end # IDE Controller device pci f.3 on end # Audio device pci f.4 on end # OHCI device pci f.5 on end # EHCI - register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC - register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG - register "unwanted_vpci[2]" = "0" # End of list has a zero + register "unwanted_vpci[0]" = "0" # End of list has a zero end end end diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb index fccf121786..1112fcee2c 100644 --- a/src/mainboard/artecgroup/dbe61/Options.lb +++ b/src/mainboard/artecgroup/dbe61/Options.lb @@ -71,8 +71,9 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=2 +default HAVE_PIRQ_TABLE=0 +default IRQ_SLOT_COUNT=6 + #object irq_tables.o ## @@ -112,8 +113,8 @@ default CONFIG_ROM_STREAM = 1 ## The default compiler ## default CROSS_COMPILE="" -default CC="$(CROSS_COMPILE)gcc-3.4 -m32" -default HOSTCC="gcc-3.4" +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" ## ## The Serial Console diff --git a/src/mainboard/artecgroup/dbe61/irq_tables.c b/src/mainboard/artecgroup/dbe61/irq_tables.c index 636f129119..4322e20e9b 100644 --- a/src/mainboard/artecgroup/dbe61/irq_tables.c +++ b/src/mainboard/artecgroup/dbe61/irq_tables.c @@ -7,24 +7,53 @@ #include -const struct irq_routing_table intel_irq_routing_table = { +#define ID_SLOT_PCI_NET 1 // ThinCan ethernet +#define ID_SLOT_PCI_RSVD1 2 // reserved entry 1 +#define ID_SLOT_PCI_RSVD3 3 // reserved entry 2 +#define ID_SLOT_PCI_RSVD2 4 // reserved entry 3 +#define ID_EMBED_PCI 0xff // onboard PCI device + +// CS5535 PCI INT[A-D] Interrupt Routing lines. +#define NO_CONNECT 0 // not used +#define CS_PCI_INTA 1 // PCI INTA +#define CS_PCI_INTB 2 // PCI INTB +#define CS_PCI_INTC 3 // PCI INTC +#define CS_PCI_INTD 4 // PCI INTD + +// IRQ bitmap reference line FEDCBA9876543210 +// 0000110000100000b +#define PCI_IRQ 0xc20 // PCI allowed IRQs here + +const struct irq_routing_table intel_irq_routing_table = +{ PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ - 32+16*2, /* there can be total 2 devices on the bus */ + 32+16*6, /* there can be total 2 devices on the bus */ 0x00, /* Where the interrupt router lies (bus) */ (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0x800, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Crap (miniport) */ + 0x0800, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x208f, /* Device */ + 0x00000000, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, + // Geode GX3 Host Bridge and VGA Graphics + {0, 0x01<<3, {{CS_PCI_INTA, PCI_IRQ}, {NO_CONNECT, PCI_IRQ}, {NO_CONNECT, PCI_IRQ}, {NO_CONNECT, PCI_IRQ}}, ID_EMBED_PCI, 0x0}, + // Realtek RTL8100/8139 Network Controller + {0, 0x0d<<3, {{CS_PCI_INTB, PCI_IRQ}, {CS_PCI_INTC, PCI_IRQ}, {CS_PCI_INTD, PCI_IRQ}, {CS_PCI_INTA, PCI_IRQ}}, ID_SLOT_PCI_NET, 0x0}, + // Reserved for future extensions + {0, 0x0c<<3, {{CS_PCI_INTA, PCI_IRQ}, {CS_PCI_INTB, PCI_IRQ}, {CS_PCI_INTC, PCI_IRQ}, {CS_PCI_INTD, PCI_IRQ}}, ID_SLOT_PCI_RSVD1, 0x0}, + // Geode CS5535/CS5536 IO Companion: USB controllers, IDE, Audio. + {0, 0x0f<<3, {{CS_PCI_INTA, PCI_IRQ}, {CS_PCI_INTB, PCI_IRQ}, {CS_PCI_INTC, PCI_IRQ}, {CS_PCI_INTD, PCI_IRQ}}, ID_EMBED_PCI, 0x0}, + // Reserved for future extensions + {0, 0x0e<<3, {{CS_PCI_INTC, PCI_IRQ}, {CS_PCI_INTD, PCI_IRQ}, {CS_PCI_INTA, PCI_IRQ}, {CS_PCI_INTB, PCI_IRQ}}, ID_SLOT_PCI_RSVD2, 0x0}, + // Reserved for future extensions + {0, 0x0b<<3, {{CS_PCI_INTD, PCI_IRQ}, {CS_PCI_INTA, PCI_IRQ}, {CS_PCI_INTB, PCI_IRQ}, {CS_PCI_INTC, PCI_IRQ}}, ID_SLOT_PCI_RSVD3, 0x0} } }; + unsigned long write_pirq_routing_table(unsigned long addr) { return copy_pirq_routing_table(addr); diff --git a/src/mainboard/artecgroup/dbe61/mainboard.c b/src/mainboard/artecgroup/dbe61/mainboard.c index 2079443359..c95ca159f4 100644 --- a/src/mainboard/artecgroup/dbe61/mainboard.c +++ b/src/mainboard/artecgroup/dbe61/mainboard.c @@ -7,31 +7,33 @@ #include "chip.h" - -static void init(struct device *dev) { -/* +static void init(struct device *dev) +{ unsigned bus = 0; - unsigned devfn = PCI_DEVFN(0xf, 4); - device_t usb = NULL; - unsigned char usbirq = 0xa; -*/ + unsigned devNic = PCI_DEVFN(0xd, 0); + unsigned devUsb = PCI_DEVFN(0xf, 4); + device_t usb = NULL, nic = NULL; + unsigned char irqUsb = 0xa, irqNic = 0xb; printk_debug("ARTECGROUP DBE61 ENTER %s\n", __FUNCTION__); -#if 0 - /* I can't think of any reason NOT to just set this. If it turns out we want this to be - * conditional we can make it a config variable later. - */ - - printk_debug("%s (%x,%x)SET USB PCI interrupt line to %d\n", - __FUNCTION__, bus, devfn, usbirq); - usb = dev_find_slot(bus, devfn); - if (! usb){ - printk_err("Could not find USB\n"); - } else { - pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq); - } -#endif + // FIXME: do we need to initialize USB OHCI this way? + printk_debug("%s (%x,%x) set USB PCI interrupt line to %d\n", + __FUNCTION__, bus, devUsb, irqUsb); + + // initialize the USB controller + usb = dev_find_slot(bus, devUsb); + if (!usb) printk_err("Could not find USB\n"); + else pci_write_config8(usb, PCI_INTERRUPT_LINE, irqUsb); + + printk_debug("%s (%x,%x) set NIC PCI interrupt line to %d\n", + __FUNCTION__, bus, devNic, irqNic); + + // initialize the Realtek NIC + nic = dev_find_slot(bus, devNic); + if (!nic) printk_err("Could not find USB\n"); + else pci_write_config8(nic, PCI_INTERRUPT_LINE, irqNic); + printk_debug("ARTECGROUP DBE61 EXIT %s\n", __FUNCTION__); } -- cgit v1.2.3