From 571fb1fb4432d7e1e18ef610adbca6971e01573d Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Fri, 7 Oct 2016 12:46:28 +0200 Subject: mainboard/apple: Use C89 comments style & remove commented code Change-Id: I81c32c618627507cc3a83f60f565a73e5e6d7a13 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/16913 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/mainboard/apple/macbook21/romstage.c | 200 ++++++++++++++++--------------- src/mainboard/apple/macbookair4_2/gnvs.c | 2 +- 2 files changed, 103 insertions(+), 99 deletions(-) (limited to 'src/mainboard/apple') diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c index 695f1cd291..391b09f6b7 100644 --- a/src/mainboard/apple/macbook21/romstage.c +++ b/src/mainboard/apple/macbook21/romstage.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -// __PRE_RAM__ means: use "unsigned" for device, not a struct. +/* __PRE_RAM__ means: use "unsigned" for device, not a struct. */ #include #include @@ -89,110 +89,116 @@ void setup_ich7_gpios(void) static void ich7_enable_lpc(void) { - // Enable Serial IRQ + /* Enable Serial IRQ */ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); - // I/O Decode Ranges - // X60: 0x0210 == 00000010 00010000 - // Macbook21: 0x0010 == 00000000 00010000 - // Bit 9:8 LPT Decode Range. This field determines which range to - // decode for the LPT Port. - // 00 = 378h - 37Fh and 778h - 77Fh - // 10 = 3BCh - 3BEh and 7BCh - 7BEh + /* I/O Decode Ranges + * X60: 0x0210 == 00000010 00010000 + * Macbook21: 0x0010 == 00000000 00010000 + * Bit 9:8 LPT Decode Range. This field determines which range to + * decode for the LPT Port. + * 00 = 378h - 37Fh and 778h - 77Fh + * 10 = 3BCh - 3BEh and 7BCh - 7BEh + */ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); - // LPC_EN--LPC I/F Enables Register - // X60: 0x1f0d == 00011111 00001101 - // Macbook21: 0x3807 == 00111000 00000111 - // Bit 13 CNF2_LPC_EN -- R/W. Microcontroller Enable # 2. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 4Eh and 4Fh - // to the LPC interface. This range is used for a - // microcontroller. - // Bit 12 CNF1_LPC_EN -- R/W. Super I/O Enable. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 2Eh and 2Fh - // to the LPC interface. This range is used for - // Super I/O devices. - // Bit 11 MC_LPC_EN -- R/W. Microcontroller Enable # 1. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 62h and 66h - // to the LPC interface. This range is used for a - // microcontroller. - // Bit 10 KBC_LPC_EN -- R/W. Keyboard Enable. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 60h and 64h - // to the LPC interface. This range is used for a - // microcontroller. - // Bit 9 GAMEH_LPC_EN -- R/W. High Gameport Enable - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 208h to 20Fh - // to the LPC interface. This range is used for a gameport. - // Bit 8 GAMEL_LPC_EN -- R/W. Low Gameport Enable - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 200h to 207h - // to the LPC interface. This range is used for a gameport. - // Bit 3 FDD_LPC_EN -- R/W. Floppy Drive Enable - // 0 = Disable. - // 1 = Enables the decoding of the FDD range to the LPC - // interface. This range is selected in the LPC_FDD/LPT - // Decode Range Register (D31:F0:80h, bit 12). - // Bit 2 LPT_LPC_EN -- R/W. Parallel Port Enable - // 0 = Disable. - // 1 = Enables the decoding of the LPT range to the LPC - // interface. This range is selected in the LPC_FDD/LPT - // Decode Range Register (D31:F0:80h, bit 9:8). - // Bit 1 COMB_LPC_EN -- R/W. Com Port B Enable - // 0 = Disable. - // 1 = Enables the decoding of the COMB range to the LPC - // interface. This range is selected in the LPC_COM Decode - // Range Register (D31:F0:80h, bits 6:4). - // Bit 0 COMA_LPC_EN -- R/W. Com Port A Enable - // 0 = Disable. - // 1 = Enables the decoding of the COMA range to the LPC - // interface. This range is selected in the LPC_COM Decode - // Range Register (D31:F0:80h, bits 3:2). + /* LPC_EN--LPC I/F Enables Register + * X60: 0x1f0d == 00011111 00001101 + * Macbook21: 0x3807 == 00111000 00000111 + * Bit 13 CNF2_LPC_EN -- R/W. Microcontroller Enable # 2. + * 0 = Disable. + * 1 = Enables the decoding of the I/O locations 4Eh and 4Fh + * to the LPC interface. This range is used for a + * microcontroller. + * Bit 12 CNF1_LPC_EN -- R/W. Super I/O Enable. + * 0 = Disable. + * 1 = Enables the decoding of the I/O locations 2Eh and 2Fh + * to the LPC interface. This range is used for + * Super I/O devices. + * Bit 11 MC_LPC_EN -- R/W. Microcontroller Enable # 1. + * 0 = Disable. + * 1 = Enables the decoding of the I/O locations 62h and 66h + * to the LPC interface. This range is used for a + * microcontroller. + * Bit 10 KBC_LPC_EN -- R/W. Keyboard Enable. + * 0 = Disable. + * 1 = Enables the decoding of the I/O locations 60h and 64h + * to the LPC interface. This range is used for a + * microcontroller. + * Bit 9 GAMEH_LPC_EN -- R/W. High Gameport Enable + * 0 = Disable. + * 1 = Enables the decoding of the I/O locations 208h to 20Fh + * to the LPC interface. This range is used for a gameport. + * Bit 8 GAMEL_LPC_EN -- R/W. Low Gameport Enable + * 0 = Disable. + * 1 = Enables the decoding of the I/O locations 200h to 207h + * to the LPC interface. This range is used for a gameport. + * Bit 3 FDD_LPC_EN -- R/W. Floppy Drive Enable + * 0 = Disable. + * 1 = Enables the decoding of the FDD range to the LPC + * interface. This range is selected in the LPC_FDD/LPT + * Decode Range Register (D31:F0:80h, bit 12). + * Bit 2 LPT_LPC_EN -- R/W. Parallel Port Enable + * 0 = Disable. + * 1 = Enables the decoding of the LPT range to the LPC + * interface. This range is selected in the LPC_FDD/LPT + * Decode Range Register (D31:F0:80h, bit 9:8). + * Bit 1 COMB_LPC_EN -- R/W. Com Port B Enable + * 0 = Disable. + * 1 = Enables the decoding of the COMB range to the LPC + * interface. This range is selected in the LPC_COM Decode + * Range Register (D31:F0:80h, bits 6:4). + * Bit 0 COMA_LPC_EN -- R/W. Com Port A Enable + * 0 = Disable. + * 1 = Enables the decoding of the COMA range to the LPC + * interface. This range is selected in the LPC_COM Decode + * Range Register (D31:F0:80h, bits 3:2). + */ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3807); - /* GEN1_DEC, LPC Interface Generic Decode Range 1 */ - // X60: 0x1601 0x007c == 00000000 01111100 00010110 00000001 - // Macbook21: 0x0681 0x000c == 00000000 00001100 00000110 10000001 - // Bit 31:24 Reserved. - // Bit 23:18 Generic I/O Decode Range Address[7:2] Mask: A `1' in any - // bit position indicates that any value in the corresponding - // address bit in a received cycle will be treated as a - // match. The corresponding bit in the Address field, below, - // is ignored. The mask is only provided for the lower 6 bits - // of the DWord address, allowing for decoding blocks up to - // 256 bytes in size. - // Bit 17:16 Reserved. - // Bit 15:2 Generic I/O Decode Range 1 Base Address (GEN1_BASE). This - // address is aligned on a 128-byte boundary, and must have - // address lines 31:16 as 0. NOTE: The Intel ICH7 does not - // provide decode down to the word or byte level. - // Bit 1 Reserved. - // Bit 0 Generic Decode Range 1 Enable (GEN1_EN) -- R/W. - // 0 = Disable. - // 1 = Enable the GEN1 I/O range to be forwarded to the LPC - // I/F + /* GEN1_DEC, LPC Interface Generic Decode Range 1 + * X60: 0x1601 0x007c == 00000000 01111100 00010110 00000001 + * Macbook21: 0x0681 0x000c == 00000000 00001100 00000110 10000001 + * Bit 31:24 Reserved. + * Bit 23:18 Generic I/O Decode Range Address[7:2] Mask: A `1' in any + * bit position indicates that any value in the corresponding + * address bit in a received cycle will be treated as a + * match. The corresponding bit in the Address field, below, + * is ignored. The mask is only provided for the lower 6 bits + * of the DWord address, allowing for decoding blocks up to + * 256 bytes in size. + * Bit 17:16 Reserved. + * Bit 15:2 Generic I/O Decode Range 1 Base Address (GEN1_BASE). This + * address is aligned on a 128-byte boundary, and must have + * address lines 31:16 as 0. NOTE: The Intel ICH7 does not + * provide decode down to the word or byte level. + * Bit 1 Reserved. + * Bit 0 Generic Decode Range 1 Enable (GEN1_EN) -- R/W. + * 0 = Disable. + * 1 = Enable the GEN1 I/O range to be forwarded to the LPC + * I/F + */ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x0681); pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x000c); - /* GEN2_DEC, LPC Interface Generic Decode Range 2 */ - // X60: 0x15e1 0x000c == 00000000 00001100 00010101 11100001 - // Macbook21: 0x1641 0x000c == 00000000 00001100 00010110 01000001 + /* GEN2_DEC, LPC Interface Generic Decode Range 2 + * X60: 0x15e1 0x000c == 00000000 00001100 00010101 11100001 + * Macbook21: 0x1641 0x000c == 00000000 00001100 00010110 01000001 + */ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x1641); pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); - /* GEN3_DEC, LPC Interface Generic Decode Range 3 */ - // X60: 0x1681 0x001c == 00000000 00011100 00010110 10000001 - // Macbook21: 0x0000 0x0000 - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x0000); // obsolete, because it writes zeros? + /* GEN3_DEC, LPC Interface Generic Decode Range 3 + * X60: 0x1681 0x001c == 00000000 00011100 00010110 10000001 + * Macbook21: 0x0000 0x0000 + */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x0000); /* obsolete, because it writes zeros? */ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x0000); - /* GEN4_DEC, LPC Interface Generic Decode Range 4 */ - // X60: 0x0000 0x0000 - // Macbook21: 0x0301 0x001c == 00000000 00011100 00000011 00000001 + /* GEN4_DEC, LPC Interface Generic Decode Range 4 + * X60: 0x0000 0x0000 + * Macbook21: 0x0301 0x001c == 00000000 00011100 00000011 00000001 + */ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x90, 0x0301); pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x92, 0x001c); } @@ -225,11 +231,9 @@ static void rcba_config(void) /* Disable unused devices */ RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_PCIE4 | FD_PCIE3 | FD_INTLAN | FD_ACMOD | FD_ACAUD; - RCBA32(0x3418) |= (1 << 0); // Required. + RCBA32(0x3418) |= (1 << 0); /* Required. */ /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ - // RCBA32(0x1e84) = 0x00020001; - // RCBA32(0x1e80) = 0x0000fe01; /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ RCBA32(0x1e9c) = 0x000200f0; @@ -241,15 +245,15 @@ static void early_ich7_init(void) uint8_t reg8; uint32_t reg32; - // program secondary mlt XXX byte? + /* program secondary mlt XXX byte? */ pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); - // reset rtc power status + /* reset rtc power status */ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); reg8 &= ~(1 << 2); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); - // usb transient disconnect + /* usb transient disconnect */ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); reg8 |= (3 << 0); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); @@ -283,7 +287,7 @@ static void early_ich7_init(void) RCBA32(0x3e0e) |= (1 << 7); RCBA32(0x3e4e) |= (1 << 7); - // next step only on ich7m b0 and later: + /* next step only on ich7m b0 and later: */ reg32 = RCBA32(0x2034); reg32 &= ~(0x0f << 16); reg32 |= (5 << 16); diff --git a/src/mainboard/apple/macbookair4_2/gnvs.c b/src/mainboard/apple/macbookair4_2/gnvs.c index 06f47cdf5b..def9e5fd74 100644 --- a/src/mainboard/apple/macbookair4_2/gnvs.c +++ b/src/mainboard/apple/macbookair4_2/gnvs.c @@ -23,7 +23,7 @@ void acpi_create_gnvs(global_nvs_t *gnvs) gnvs->s5u0 = 0; gnvs->s5u1 = 0; - // the lid is open by default. + /* the lid is open by default. */ gnvs->lids = 1; gnvs->tcrt = 100; -- cgit v1.2.3