From 27f340e77722929b7b394ba7458d09efbe9c180a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Mon, 15 Feb 2021 13:18:14 +0200 Subject: AGESA,binaryPI boards: Move IRQ table programming MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit IRQ programming should be done outside (obsolete) MP table generation. Change-Id: Ibce2af4de91549c4c9743cd997f625164672a713 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/c/coreboot/+/38564 Reviewed-by: Angel Pons Reviewed-by: Mike Banon Tested-by: build bot (Jenkins) --- src/mainboard/amd/union_station/mainboard.c | 19 +++++++++++++++ src/mainboard/amd/union_station/mptable.c | 37 ++++++++--------------------- 2 files changed, 29 insertions(+), 27 deletions(-) (limited to 'src/mainboard/amd/union_station') diff --git a/src/mainboard/amd/union_station/mainboard.c b/src/mainboard/amd/union_station/mainboard.c index 43dde04c63..81541f37f5 100644 --- a/src/mainboard/amd/union_station/mainboard.c +++ b/src/mainboard/amd/union_station/mainboard.c @@ -3,13 +3,32 @@ #include #include #include +#include #include +static const u8 mainboard_intr_data[] = { + [0x00] = 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, /* INTA# - INTH# */ + [0x08] = 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, /* Misc-nil, 0, 1, 2, INT from Serial irq */ + [0x10] = 0x09, 0x1F, 0x1F, 0x10, 0x1F, 0x12, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x12, 0x11, 0x12, 0x11, 0x12, 0x11, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x11, 0x12, 0x13 +}; + +/* PIRQ Setup */ +static void pirq_setup(void) +{ + intr_data_ptr = mainboard_intr_data; +} + /********************************************** * Enable the dedicated functions of the board. **********************************************/ static void mainboard_enable(struct device *dev) { + pirq_setup(); + /* * Initialize ASF registers to an arbitrary address because someone * long ago set things up this way inside the SPD read code. The diff --git a/src/mainboard/amd/union_station/mptable.c b/src/mainboard/amd/union_station/mptable.c index f7400de389..df3452a871 100644 --- a/src/mainboard/amd/union_station/mptable.c +++ b/src/mainboard/amd/union_station/mptable.c @@ -1,21 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0-only */ #include -#include #include #include #include #include - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; +#include static void *smp_write_config_table(void *v) { @@ -42,13 +32,6 @@ static void *smp_write_config_table(void *v) /* I/O APICs: APIC ID Version State Address */ smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); - u8 byte; - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ #define IO_LOCAL_INT(type, intr, apicid, pin) \ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); @@ -62,23 +45,23 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[0x03]); //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ PCI_INT(0x0, 0x14, 0x0, 0x10); /* Southbridge HD Audio: */ PCI_INT(0x0, 0x14, 0x2, 0x12); - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[0x30]); /* USB */ + PCI_INT(0x0, 0x12, 0x1, intr_data_ptr[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data_ptr[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data_ptr[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data_ptr[0x35]); /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[0x41]); /* on board NIC & Slot PCIE. */ -- cgit v1.2.3