From 31d04e6e0dd6105f67a28a42634c806a548d8930 Mon Sep 17 00:00:00 2001 From: Richard Spiegel Date: Tue, 2 Jul 2019 17:13:19 -0700 Subject: mainboard/amd: Add padmelon board code Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh), but as the needed binaries are not yet merged (commit 33615), a config HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available, the board defaults to Prairie Falcon, which use the same binaries as Stoney Ridge. Once the binaries are merged, the config will be eliminated. Fan control is done through F81803A SIO, and IRQ/GPIO and other board characteristics are the same regardless of Merlin Falcon or Prairie Falcon. Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin Falcon. The requested development was for Merlin Falcon. There are some small spec changes (such as number of memory channels) between SOCs. Brown Falcon was not investigated, Prairie Falcon is very similar to Stoney Ridge. Started from Gardenia code, added changes created by Marc Jones and finally revised against schematic, which added changes to GPIO settings. BUG=none. TEST=Both versions tested and boot to Linux using SeaBIOS. Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd Signed-off-by: Richard Spiegel Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held --- src/mainboard/amd/padmelon/BiosCallOuts.h | 46 +++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 src/mainboard/amd/padmelon/BiosCallOuts.h (limited to 'src/mainboard/amd/padmelon/BiosCallOuts.h') diff --git a/src/mainboard/amd/padmelon/BiosCallOuts.h b/src/mainboard/amd/padmelon/BiosCallOuts.h new file mode 100644 index 0000000000..239f7d8f89 --- /dev/null +++ b/src/mainboard/amd/padmelon/BiosCallOuts.h @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fans runs at 25KHz and 3-wire fans runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF -- cgit v1.2.3